Tender notice from Switzerland, published on 12 Dec 2019.
Executive Summary
The DIVISION INFRASTRUCTURE ACHATS, CHAÎNE D'APPROVISIONNEMENT ET PRODUCTION ACHATS TECHNOLOGIE has issued a Tender notice for the procurement of a Contract notice: Electromechanical equipment in the Switzerland. This Tender notice was published on 12 Dec 2019 and is scheduled to close on 03 Feb 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 38876964, while the tender notice number is 590298-2019 and Register on the platform.
Object of the contract Electromechanical equipment Description: Contract notice: Electromechanical equipment Authority Type: Utilities entity Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: Agreement between the European Union and the Swiss Confederation Award criteria: The most economic tender CPV code: 31720000, 31720000 CPV Description: Electromechanical equipment. Delivery, assembly and commissioning of a pilot installation for brake test devices (BPG) CFF SA currently uses various brake test devices in different marshalling yards for perform air brake tests. These devices make it possible to fill and control the brakes of several train cars without a vehicle.engine. In addition to testing the brakes themselves, they offer the advantage of maintaining the pressure in the general driving of the train after the control. Thus, it is not necessary to increase again the pressure in the general driving of a motor vehicle then connected to the goods train control. Brake test equipment is a fixed installation set up at a different places on the beam of lanes. New brake test devices are installed in the marshalling yards of Biel and Bale. The tests are exclusively for freight trains, the maximum length per composition not exceeding 750 M1. Main Site: All of Switzerland. CFF SA currently uses various brake test equipment in different marshalling yards.to perform the compressed air brake tests. These devices make it possible to fill and check the brakes of several coupled wagons without a motor vehicle. In addition to testing the brakes themselves, they offer the advantage of maintaining the pressure in the general driving of the train after the control. Thus, there is no need to increase the pressure in the pipe again.General purpose of a motor vehicle then connected to the goods train control. Brake test devices are fixed installations placed at different locations on the track harness. New brake test devices are installed in the marshalling yards of Biel and Bale. The tests relate exclusively to freight trains, the maximum length per compositinot exceeding 750 M1. - EK1 proof: 2 reference projects concerning mandates executed in a conforming manner in the brake test equipment (max. 3 A4 pages per reference project, with indication of the period, the client and the scope of the project as well as description of the services requested and the role of the tenderer within the project). Reference projects cannotbe over 5 years of age. If the supplier and the manufacturer are not identical in this call for tenders, the supplier may also submit reference projects from the manufacturer, - proof EK2: certificate from a bank providing this, in the event of award, the financial guarantee for the return of installments and the guarantee of good execution, in accordance with the exrequirements, and guaranteeing the tenderer the credits corresponding to 10% of the sum of the contract (solvency). The financial institution must certify its unreserved acceptance of the model forms for the deposit refund guarantee and for the performance guarantee, - proof EK3: proof of the existence of a valid quality management system according to ISO 9001or a comparable quality management system specific to the company. Falls If the supplier and the manufacturer are not identical in this call for tenders, the supplier may submit the manufacturer's quality management system, - proof EK4: proof of the existence of an environmental management system valid according to ISO 14001 or an environmental management system cunique to the company. If the supplier and the manufacturer are not identical in this advertisement, the supplier may submit the manufacturer's environmental management system, - proof EK5: the tenderer guarantees the presence of a single point of contact (SPOC) German language for free climbing questions and transfers throughoutthe acquisition period, in collaboration with the requesting departments. This one-stop shop represents the interlocutor with competent decision-making power in the event of escalation of problems within the framework of the mandate. Proof: written confirmation with indication of name and surname, contact details, function, aptitudes and alternates of the one-stop shop, - proof 6: Germanis the language of the project and the working language on the premises planned for the assembly as well as for the provision of service and assistance. The tenderer guarantees the intervention of key people proficient in the German language (orally and in writing) for the treatment and execution of the project, for training, for the delivery and commissioning of the pilot installation and installations of series as well as for services and assistance. Proof: written confirmation with clear documentation of the linguistic knowledge of the key persons, - proof EK7: the tenderer confirms the presence of a service and assistance organization guaranteeing a response time of 2 working days at most. (on-site service person) after the announcement of ainconveniently at all locations. Proof: written confirmation with clear and understandable documentation as well as description of the service and assistance organization, - EK8 proof: the tenderer provides the personnel resources necessary to provide assistance to SBB SA according to the specifications. Proof: written confirmation, with clear and comprehensible documentation, thate are available the personnel resources with the necessary qualifications, skills and professional experience for the fulfillment of the mandate (including suppliances), - proof EK9: the tenderer confirms the presence of escalation transfer processes within the organization. organization of the project, for the pilot phase as well as for the production and for the service andassistance during the whole ... Partial offers are not allowed. Conditions for countries which have not acceded to the WTO agreements: none. General conditions: - CFF general conditions relating to the acquisition of technical systems, machines and devices (CG-T), August 2019, - general conditions of SBB maintenance of installations, technical systems, machines andAppliances (CG-Insta), August 2019. Negotiations: Negotiations remain reserved. Negotiations take place exclusively with suppliers whose offers have the prospect of a contract. The language of negotiation is German. Conditions governing the procedure: the contracting authority awards public contracts for services in Switzerland only to contractors who guaranteeensure compliance with the provisions on worker protection, working conditions and equal pay for men and women. Indication of remedies: in accordance with art. 30 LMP, this decision may be challenged in writing, within 20 days of its publication, at the Federal Administrative Court, PO Box, 9023 St. Gallen. The opposition, to present in 2 copies, will indicate the conclusions, reasons and means of proof and will be provided with the signature of the appellant party or his representative; A copy of this publication and the documents relied on as evidence, when available, will be attached to it. Remarks (Time limit for asking questions in writing): questions can be sent to www.simap.ch from the date of publication until the defined deadline of 20.12.2019. The contracting authority will respond to questions as soon as possible. National reference publication: SIMAP of 9.12.2019, doc. 1110103. Delai wishes to ask questions in writing: 20.12.2019. File available from 9.12.2019. Conditions for obtaining the tender dossier: Les ofFres and other elements of the contract must be submitted in the language of the contract indicated in section 2.4 of the conditions of the invitation to tender. The GTC and various form models are available in German, French and Italian, some also in English, and can be requested from the service mentioned in section 1.2 of this publication. These documents serve only as translation aid. The DDocuments specific to the invitation to tender, in particular the conditions of the invitation to tender, technical and other specifics as well as the contract are only available in German. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Electromechanical equipment was 03 Feb 2020. Bidding is closed.
This tender has been issued by DIVISION INFRASTRUCTURE ACHATS, CHAÎNE D'APPROVISIONNEMENT ET PRODUCTION ACHATS TECHNOLOGIE in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 31720000 - Electromechanical equipment.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 38876964. The purchaser document reference is 590298-2019.
Browse other tenders from Switzerland or search by relevant keywords and CPV classification.
This tender falls under Defence and Security in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.