Contract notice: Electrical installation work Tender - 23382096
Tender notice from Bulgaria, published on 17 May 2018.
Executive Summary
The ?? „?????????? ???????? ??????????? ??????????????” has issued a Tender notice for the procurement of a Contract notice: Electrical installation work of transformers in the Bulgaria. This Tender notice was published on 17 May 2018 and is scheduled to close on 28 Jun 2018, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 23382096, while the tender notice number is 211265-2018 and Register on the platform.
Key facts
Summary
Contract notice: Electrical installation work of transformers
Object of the contract Electrical installation work of transformers Description: Contract notice: Electrical installation work of transformers Authority Type: Body governed by public law Contact Nature: Services Procedure: Open procedure Document: Contract notice Regulation: European Union Award criteria: Lowest price CPV code: 45317200, 31171000, 50532200, 51111300, 45317200, 31171000, 50532200, 51111300 CPV Description: Repair of traction transformers The order covers activities in the course of overhaul of 34 (thirty-four) pieces of the transformer. traction transformers. Main Site: Contractor's repair base; Reg. Under. Energos. Sofia with locatedin its territory traction substations - Brusartsi, Vidin, Cherven Bryag, Boychinovtsi, Iliyantsi, Vratsa and Stolnik; The OP covers the following activities for overhaul of 34 st. traction transformers: 1. Dismantling a transformer to a transport type; Load of a transformer from a vehicle foundation to a rope or crane; Transporter transformer and its accessories from correspondingthe traction substation to the site of major overhaul; Preliminary electrical measurements in factory conditions; Opening the transformer and removing the active part of the kettle; Inspection and drafting a defect report; Production of upper and lower half-bags; Manufacture and replacement of unsuitable elements from the main electrical insulation; Re-isolation of the windings of the windings; Dryof the active moiety; Clamping the active part after drying; Design of a new transformer cooling system according to the type, the transformer parameters and the normative requirements; Supply of a new cooling system, including cooling valves, fans, cables, fasteners and control cabinets; Reconstruction of the boiler for installation of the new cooling system; Cabbageprotection and control equipment; Cleaning of mechanical particles windings; Reconstruction and replacement of emergency pipe with overpressure valve; Diagnostics by examination and measurements of the following basic units: - Motor drive; - Upper shunt regulator, corner box, drive shafts and cardan couplings; - Oil container with power switch and temporary dia.but on the power switch Selector with preselector Circuit diagram of stepper control with motor drive 19. Repair of the motor drive and foot controller, including: - Replacement of the switchgear, - Repair of the differential mechanism for removal of the self-acting switches and oil leakage, - Repair of the terminal block of the electrical interlock, - Replacement of the heating-- - Replacement of the contact rosette - Repair of contact surfaces of the switch and controller - Replacement of the resistor unit to the contact line of the switch for remote indication of the position of the motor drive fasteners - Differential painting. mechanism and safety box; - Repair the power switch for: bringing the processon switch. in accordance with the rules of production; restoring the functional suitability of the current loop and the contact surfaces of the contact systems - Repair of the selector to restore the current loop capacity and to crimp the movable contact elements to increase its reliability - Repair of the preselector to restore the working capacity-of the current loop, as well as silvering the contact elements to increase its reliability; Sand blasting and revision of welding bosses of the transformer and expansion tank; Internal cleaning and exterior painting; Flanging frame flanges, flanges, valves and technological hatches; Revision of cranes. Assembly overstocking 24. Drying transformer ina vacuum vacuum drier; Transformer closing; 26. Installation of a new cooling system. Functional samples; Regeneration and processing of existing transformer oil up to fresh indicators according to IEC60422: 2013 or equivalent for mineral insulators. oils for an electrical equipment; Pump delivery 110kV; 29. Pump delivery 27.5kV; 30. Manufacture and installation ofand intermediate flanges for the pins; Pipe mounting and sealing; Functional checks and revisions of: buchholz relay, jet relay, level indicator, silica gel respirator, thermometers; Lubrication of the active part under vacuum; Complete electrical measurements and tests after repairs according to the requirements of BDS EN 60076 or equivalent in factory conditions; Transport of Transformer and Optomaits erection after repair from the site of major overhaul to the respective TPM; Unloading a transformer from a vehicle to a foundation on a rigging or a crane; Transformer installation to operational condition; Preliminary site measurements after installation During the repair of each traction transformer it is necessary to design and build a new foundationt with oil tank according to the requirements of Ordinance № 3 for the layout of electrical systems and power lines, Ordinance No I-1971 / 29.10.2009 on the construction and technical rules and norms for fire safety and the regulation for waste oils and waste petroleum products in force from 8 January 2013 Not required Not required. In the open procedure, a participant-of the conditions of Art. 10, para. 1 of the Public Procurement Act. The Assignor does not have the right to create a legal entity when the participant selected as a contractor is a union of natural and / or legal entities. Where the participant is a grouping which is not a legal person, a copy of a document showing the legal basis for the formation of the grouping must be submitted, with a time limit not shorter than the termthis public procurement contract. The document must contain: 1. the rights and obligations of the members of the grouping; the distribution of responsibility among the members of the grouping; the activities that each member of the group will perform. The assignor removes from the procedure the participant for whom the grounds under Art. 54, para. 1, item 1-7 of the Public Procurement Act, Art. 55, para. 1, item 1, item 4 and-item 5 of the Public Procurement Act and Art. 107 of the Public Procurement Act, as well as the circumstances under Art. 3, item 8 and Art. 4 of the Economic and Financial Relations Act with the companies registered in preferential tax jurisdictions, the persons controlled by them and their actual owners and the presence of circumstances under Art. 69 of the Law on Counteracting Corruption and for Removing the Unlawfully Acquired Property. Everyone-a member of the grouping that is not a legal person, subcontractors and third parties must meet the relevant selection criteria and there should be no grounds for removal from the procedure. 67, para. 1 of the PPA when submitting the tender, the participant declares the lack of the grounds for removal from the procedure and compliance with the selection criteria by presenting the eEEDOP.where the participant is a grouping which is not a legal entity, a separate EEDOP shall be submitted for each member of the consortium when submitting the bid. Where the participant has indicated that it will use subcontractors and / or third parties when submitting the tender, each of them will be presented with a separate ENEDOP. The documents proving the information specified in the EUEDOP may be requiredin addition to the conditions of Art. 67, para. 5 of the Public Procurement Act. According to Art. 67, para. 6 of the Public Procurement Act before the conclusion of a public procurement contract, the tenderer designated as a contractor shall present up-to-date documents certifying the lack of grounds for removal from the procedure and compliance with selection criteria. Documents are submitted by each member of the grouping that is not a legal entity and subcontractorsthey and third parties, if any. Participants can obtain the necessary information about the obligations related to: Taxes and social security, environmental protection, employment protection and working conditions in the country that are in force and relevant to the subject of the contract, as follows: - taxes and NPO insurance, www.nap.bg/ -- environmental protection MOEW, www.moew.government.bg/, protection-of employment EA, https://www.az.government.bg/ - working conditions in the country EA GIT, www.gli.government.bg/./ When signing the contract the participant nominated as contractor shall provide a guarantee for securing the execution of the contract in the amount of 5% of the value of the contract without VAT. The guarantee for securing the execution of the contract is presented in one of the following forms: A) unconditional, neoor (B) a cash payment deposited to a current account of NRIC, IBAN: BG53CECB 9790 3319 1009 00, BIC: CECBBGSF at Bank CCB Plc, certified by a payment order, or B) insurance that provides the performance of the contract in the original. When the guarantee for collateral is executed in the form of a bank guarantee or a contractthe period of validity shall be the term of the contract plus 30 days. The terms and conditions for the detention and release of the performance guarantee are laid down in the contract for the award of a public contract. Internet address (URL): www.rail-infra.bg Directive: Classical Directive (2014/24/EU)
The bid deadline for Contract notice: Electrical installation work of transformers was 28 Jun 2018. Bidding is closed.
This tender has been issued by ?? „?????????? ???????? ??????????? ??????????????” in Bulgaria.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 45317200 - Electrical installation work of transformers, 31171000 - Liquid dielectric transformers, 50532200 - Repair and maintenance services of transformers, 51111300 - Installation services of transformers.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 23382096. The purchaser document reference is 211265-2018.
This tender falls under Construction and Real Estate, Defence and Security in Bulgaria. Suppliers in these sectors can track similar Bulgaria tenders using CPV-based alerts.