Tender notice from Georgia, published on 10 Jul 2018.
Executive Summary
The ENGURHESI LTD has issued a Tender notice for the procurement of a Contract notice: EBRD - Enguri Hydro Power Plant Rehabilitation Project — Climate Resilience Upgrade in the Georgia. This Tender notice was published on 10 Jul 2018 and is scheduled to close on 14 Aug 2018, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 24862894, while the tender notice number is 295588-2018 and Register on the platform.
Object of the contract EBRD - Enguri Hydro Power Plant Rehabilitation Project — Climate Resilience Upgrade Description: Contract notice: EBRD - Enguri Hydro Power Plant Rehabilitation Project — Climate Resilience Upgrade Authority Type: Utilities entity Contact Nature: Works Procedure: Open procedure Document: Contract notice Regulation: European Investment Bank, European Investment Fund, European Bank for Reconstruction and Development Award criteria: Not specified CPV code: 71310000, 71311000, CPV Description: Consultative engineering and construction services. Civil engineering consultancy services. Procurement Reference: 9166-PRE-49649. Project name: Enguri Hydro Power Plant Rehabilitation Project — Climate Resilience Upgrade. Country: Georgia. Business sector: Power and Energy. Project ID: Op ID 49649. Funding source: EBRD loan proceeds. Type of contract: Project goods, works and services. Type of notice: Invitation for Pre-qualification. Issue date: 4.7.2018. Closing date: 14.8.2018 (16:00 local time). This Invitation for Pre-qualification follows the General Procurement Notice for this project which was published on the EBRD website, Project Procurement Notices (http://www.ebrd.com/pages/workingwithus/procurement/project.shtml) on 5.1.2017.. Engurhesi Ltd, hereinafter referred to as "the Client", intends using part of the proceeds of a Loan from European Bank for Reconstruction and Development, hereinafter referred to as "the Bank" towards the cost of Enguri Hydro Power Plant Rehabilitation Project.. The Client intends pre-qualifying firms and consortia to tender for the following contract(s), hereinafter referred to as "the Contract", to be funded from part of the proceeds of the Loan.. The aim of the Contract is to carry out the refurbishment and modernization of the electrical and hydromechanical equipment of Enguri HPP facilities.. The Enguri Dam is located in west Georgia, Tsalenjikha Region, 35 kilometers from the regional center city — Zugdidi, while the Enguri HPP is located in Gali region, 16 kilometers from the temporary Abkhazian border. The dam and the power plant are connected with the 15 km, 09, 5 m pressure tunnel.. The scope of the Contract includes the rehabilitation of the following equipment:. Hydro-mechanical part:. Enguri bottom outlet gates:. — maintenance and service gates rehabilitation with replacement of hydraulic cylinders, . — the "upstream guiding strips" and "lateral guiding blocks" need to be fully replaced by UHME-PE (Ultra-Hoch-Molecular — Polyethylene) plates, . — provision and installation of all sealings between the maintenance gate bonnet covers and new by-pass valves.. Additional service butterfly valves — 05000 mm for turbine penstocks:. — rehabilitation (complete) of the electrical overhead travelling (EOT) crane 800 kN / 200 kN, . — rehabilitation of the by-pass system of the present valves and the aeration valve, . — replacement of all hydraulic cylinders of the present valves, . — design and installation of one new butterfly valves with all their auxiliaries as a pilot (optional).. Additional butterfly bypass (06000) or redesign of existing bypass in pressure tunnel valve chamber:. — complete rehabilitation of electrical overhead travelling (EOT) crane 1000 kN / 200 kN, . — provision and installation of four (2x2) manually operated spherical valves (DN 400, PN25), incl. all necessary piping, . — provision and installation of extra eight (4x2) manually operated spherical valves (DN 400, PN25), . — provision and installation of 4 new servomotors (0800 x 0160 x 2122 mm) for the butterfly valve 06000 including valve drifting monitoring system.. New gates and hoists for Vardnili 2 HPP:. — cleaning, repair (both concrete and mechanical parts) and painting of all 4 spillway maintenance and service gate embedded parts to receive the new spillway gates, . — after structural calculations, repair the remaining hoist structures and complete it to receive the 2 winch hoisting units of capacity of 2x320 kN, . — provide and install 2 winch hosting units of the capacity of 2x320 kN in two (2) spillway structures with new roof construction, . — provide and install local and remote-control equipment (electrical cabinets) for two (2) hoisting winches with a capacity of 2x320 kN, . — provide and install 2 fixed wheel roller gates as spillway service gate in the 2 spillway structures, . — provide and install one fixed wheel roller gate as spillway maintenance gate common for both spillway structures, . — provide and install necessary gate dogging devices on all spillway gate slots.. Rehabilitation of existing gates, sealings and hoists for Enguri diversion weir to Gali reservoir:. — provide and install the new steel construction to support the hoists with new foundation bolts on all 5 spillway gates etc., . — install new hoisting system of sufficient capacity (or install hydraulic strand jack), . — rehabilitation of all 5 spillway gates, . — provide a mobile electric generator of required capacity to lift one spillway gate at a time.. Electro-mechanical part:. — partially replacement of complete auxiliary power supply system including transformers, distribution and subdistributions 0, 4 kV, 50 Hz, Direct current system, . — partially replacement of power supply and control cables in dam galleries, including arrangement of cable trays and channels, . — replacement of 6, 3 kV Main distribution board including control and protection system, . — installation of Step-Up transformer for existing low voltage emergency diesel generator set to feed the emergency consumer via 6, 3 kV line, . — replacement of lighting system in selected galleries, . — replacement of equipment in 35/6, 3 kV switchyard, including circuit breaker disconnectors, instrument transformers, protection system, surge arresters, isolators, connections, lightning system etc., . — installation of redundant 35/6, 3 kV power line with circuit breaker disconnectors, stepdown transformer, instrument transformers, protection system, lighting system and auxiliary power supply 6, 3/0, 4 kV for yard supply, . — reconstruction and refurbishment of the existing 6, 3 kV Overhead line with the dedicated towers, isolators and conductors.. The Client will provide basic design for the rehabilitation activities.. The rehabilitation activities can be implemented concurrently. The expected construction period is 18-20 months, according to the operational conditions of the plant.. Pre-qualification and tendering for contracts to be financed with the proceeds of a Loan from the Bank is open to firms and joint ventures of firms from any country.. Pre-qualification documents may be obtained from the office at the address below or in electronic format free of charge.. The pre-qualification documents must be duly completed and delivered to the address below, on or before 14.8.2018, by 16:00 local time. Documents which are received late may be rejected and returned unopened.. Interested firms may obtain further information from, and inspect and acquire the prequalification documents at the following office:. . Internet address (URL):
The bid deadline for Contract notice: EBRD - Enguri Hydro Power Plant Rehabilitation Project — Climate Resilience Upgrade was 14 Aug 2018. Bidding is closed.
This tender has been issued by ENGURHESI LTD in Georgia.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 71310000 - Consultative engineering and construction services, 71311000 - Civil engineering consultancy services.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 24862894. The purchaser document reference is 295588-2018.