Contract notice: Drafting dots or tapes Tender - 23715147
Tender notice from Switzerland, published on 29 May 2018.
Executive Summary
The OFFICE FÉDÉRAL DES CONSTRUCTIONS ET DE LA LOGISTIQUE OFCL has issued a Tender notice for the procurement of a Contract notice: Drafting dots or tapes in the Switzerland. This Tender notice was published on 29 May 2018 and is scheduled to close on 09 Jul 2018, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 23715147, while the tender notice number is 229973-2018 and Register on the platform.
Object of the contract Drafting dots or tapes Description: Contract notice: Drafting dots or tapes Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: GPA Award criteria: The most economic tender CPV code: 30194210, 30194210 CPV Description: Drafting dots or tapes. (18088) 620 Security Film With the present call for tenders, the Federal Office for Buildings and Logistics (FOTL) wishes to acquire security film from the laser engraver. This is pre-milking security film on 2 types of rolls of width 50 mm and 100 mm. The final product are safety labels, with a view to equipping the entire federal administration. Main Site: Army Logistics Base BLA, Thun Military Logistics Center, Thun Strasse (ZL), Industrial Zone, Kleine Allmend, 3600 Thun. By this invitation to tender, the Federal Office for Construction and Logistics ( OFCL) wishes to acquire safety film from the laser engraver. This is pre-milking security film on 2 types of rolls of width 50 mm and 100 mm. The final product are etiqThe proof of qualification listed below must be provided in their entirety and without restriction or modification at the same time as the offer, since otherwise it will be necessary to equip the whole of the federal administration. will not be engaged in the latter. Cdq 01 Economic / financial capacity The tenderer has the economic / financial capacitynecessary for the execution of the warrant. Certified copies of the commercial register and the register of prosecutions not more than three months old at the time the contracting authority requests them or, for foreign tenderers, equivalent official and foreign documents drawn up recently. These proofs must be provided only on request, after the submission of the offer and before thecontract award procedure Cdq 02 a) Compliance with the principles of the procedure The tenderer confirms that he and his subcontractors respect the principles mentioned in the Confederation Procurement Conference (CA) form. (b) Additional documentary evidence on equal pay between men and women Bidders employing more than 50 persons andFirst-level subcontractors employing more than 50 people must demonstrate respect for pay equity between women and men not only by signing the form, but also by proving that their pay practices have been verified. Cdq 03 Acceptance of general conditions (CG) of the Confederation - relating to the purchase of goods (September 2016 edition, state of-September 2016) The above-mentioned GTC apply to the contract subject to this invitation to tender with the modifications, additions and derogations specified in Annex 9.3.3 of the tender specifications. Tenderers who make other modifications or additions thereto are excluded from the procedure. Cdq 04 Acceptance of the draft contract The tenderer is willing to acceptwithout reservation the draft contract set out in Annex 4 to these specifications. Cdq 05 Interlocutor The tenderer has a competent contact person (SPOC) in case of escalation of market problems and who takes decisions. Cdq 06 Linguistic knowledge of key persons The tenderer undertakes to call upon key persons who have a command of German (oral and written) and who are able to draw up and deliver the results and documentation in German. Cdq 07 Resources Availability and ability to meet delivery deadlines. The tenderer must demonstrate that he is able to fully comply with the tenders he has lodged. Cdq 08 Guarantee The guarantee period is 24 months for all items from their original date.setting. The warranty extends in particular to all defects in material or workmanship. It is up to the buyer to decide whether an item needs to be re-instated or replaced. In case of exchange, the defective product is replaced free of charge by a new product of the same kind, of the same quality and of the same type. If the product in question is no longer available at the time of denunciationIn the event of default, the successful tenderer must provide an appropriate substitution model. The successful tenderer shall replace and repair the products within twenty-five working days. All costs related to the guarantee (in particular of transport, displacement and assembly) are at his charge. Cdq 09 Guarantee of quality By submitting his bid, the tenderer certifies that, during the wholeFor the duration of the contract, all products will be delivered in the same quality as the samples. 10 Samples For quality control purposes, the tenderer is ready to provide, free of charge, at the request of the contracting authority and within a time limit. 25 calendar days from receipt of this application, a sample for each item. 1 roll of security film ... OfferPartial terms are not allowed. Conditions for countries which have not acceded to the WTO Agreements: None. General Conditions: Performance According to the General Conditions (GC) of Confederation Relating to the Purchase of Goods (edition September 2016, state of September 2016). These can be consulted at www.bbl.admin.ch under Documentation CG In derogation to section 2.2. CG-of the confederation for the purchase of goods, the logistic costs and all the corresponding costs must be included in the unit price. Negotiations: are reserved. The adjudicator does not engage in price negotiations. Tenderers may only modify the prices indicated in their tender in special circumstances (for example where the requirements must be met).e clarified or specified) and where the adjudicator explicitly authorizes them in their invitation to participate in negotiations. No price negotiations will be conducted. Bidders are requested to offer their best price. Conditions Governing the Procedure: The Adjudicator awarding public contracts for services in Switzerland only to bidders whoprevent compliance with the provisions on the protection of work and working conditions and equal pay for women and men. If the service is performed abroad, the tenderer at least complies with the fundamental conventions of the International Labor Organization mentioned in Annex 2a of the OMP. The Confederati Procurement Conference formOn (CA) title must be signed and attached to the offer. Other indications: the acquisition will be subject to the status of the project and the availability of credits. The adjudicator reserves the right to accept or refuse all or part of the services provided as options. Indication of the remedies: according to art. 30 LMP, the present publicationhe can be attacked within 20 days of notification by the Federal Administrative Court, PO Box 9023 St. Gall. The appeal memorial, to be presented in 2 copies, will indicate the conclusions, reasons and means of proof and will bear the signature of the appellant party or his representative; will be attached a copy of this publication and the invoked partsas evidence, when available. Closing time for the submission of tenders / Remarks: remarks on the submission of tenders: place of delivery of the tender: according to figure 1.2 a) for delivery at the reception OFCL goods (by the tenderer himself or by courier): the tender must be submitted at the latest on the closing date indicated above, during the hours ofopening of the goods reception (8: 00-12: 00 and 13: 00-16: 00) against acknowledgment of receipt of the OFCL; b) delivery by post: the postal seal or the proof with code a bars of an officially recognized Swiss or foreign post office is determining for the date of delivery (postage by a company machine is not recognized as a postal seal) c) delivery of the offto foreign diplomatic or consular representation abroad: foreign tenderers may submit their tender no later than the date of delivery above to a diplomatic or consular representation of Switzerland in their country, during opening hours, against a confirmation of receipt. They have the obligation to send this confirmation by fax (n fax according to figure1.2) to the contracting authority. The tenderer must ensure in all cases that he has proof of delivery of the tender in time. Late tenders can no longer be considered and will be returned to the sender. Remarks (time required to ask ... Internet address (URL): https://www.simap.ch Directive: Classical Directive (2014/24/EU)
The bid deadline for Contract notice: Drafting dots or tapes was 09 Jul 2018. Bidding is closed.
This tender has been issued by OFFICE FÉDÉRAL DES CONSTRUCTIONS ET DE LA LOGISTIQUE OFCL in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 30194210 - Drafting dots or tapes.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 23715147. The purchaser document reference is 229973-2018.
This tender falls under Computer Hardware and Software Services in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.