Contract notice: Dental chairs Tender in Poland - 42163854
Tender notice from Poland, published on 10 Apr 2020.
Executive Summary
The STOMATOLOGICZNE CENTRUM KLINICZNE UNIWERSYTETU MEDYCZNEGO W LUBLINIE UL. KARMELICKA 7, 20-081 LUBLIN PEŁNOMOCNIK PRZYGOTOWUJĄCY I PRZEPROWADZAJĄCY POSTĘPOWANIE: UNIWERSYTET MEDYCZNY W LUBLINIE has issued a Tender notice for the procurement of a Contract notice: Dental chairs in the Poland. This Tender notice was published on 10 Apr 2020 and is scheduled to close on 15 May 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 42163854, while the tender notice number is 170969-2020 and Register on the platform.
Object of the contract Dental chairs Description: Contract notice: Dental chairs Authority Type: Other Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 33192410, 33131152, 33126000, 33136000, 33192410, 33131152, 33126000, 33136000 CPV Description: Dental chairs. Dental scalers. Stomatology devices. Rotary and abrasive instrument. Supply and assembly of dental units with basic equipment Reference Number: UM-ZP-262-12 / 20 1. The subject of the order is delivery and assembly: Main Site: Lublin 4. Requirements for the subject of the contract: 4.1 A detailed description of the subject of the contract is included in Annex 1a to the Offer Formyou. 4.2 The Employer allows and recommends that a local vision be carried out at the place of assembly of the subject of the contract, i.e. in the building of the Dental Clinical Center of the Medical University in Lublin at ul. Chodziki 6 in Lublin. 5. Warranty: 5.1 Warranty period for the dental unit with additional equipment - 60 months with inspections every 12 months confirmed by an entry in the Technical Passportsh Devices, with the proviso that 5.2 Warranty period for dental tips listed in items No. 15 of Annex No. 1a to the Offer Form. Detailed description of the subject of the order, i.e. turbine, micromotor, contra-angle handpiece, scaler, polymerization lamp (without a 3-function syringe) blowers) minimum 24 months, however the Contractor may offer a longer warranty period, includingtaking into account the provisions of chapter XVII of the SETC. The warranty period for dental tips is one of the criteria for the evaluation of offers. 6. Equivalent solutions: 6.1 Any indication by the Employer of the name of the manufacturer is to determine the class and quality of the product being the subject of the order, it sets the standard, but does not indicate a specific product or a specific manufacturer. 6.2 Whenever norms, trademarks, patents or origin are indicated in the description of the subject of the order contained in the ToR, the Employer allows equivalent solutions. by him, the products meet the requirements specified by the Employer (in accordance with Article 30 ust. 5 of the Public Procurement Law). 6.4 The Employer shall consider as equivalent solutions those whose standards, quality features, technical and operational parameters are identical or not worse, and which meet all the Employer`s requirements set out in Annex 1a to the Offer Form. Detailed description of the subject of the contract. 6.5 In the event of doubts of the Employer related to the determination of equivalence withthe products offered by the Contractor in relation to the products and requirements specified by the Employer in the ToR, the obligation to confirm (demonstrate) the equivalence of the products offered in the submitted offer (including the costs of any expert opinions) rests with the Contractor. 7. The contractor is obliged to carry out the subject of the contract under the terms and conditions described in the model contract attachedk No. 3 to the ToR. IX. CONDITIONS FOR PARTICIPATION IN THE PROCEEDINGS 1. Contractors who can apply for the contract: 1.1. are not subject to exclusion in the circumstances referred to in art. 24 paragraph 1 Pzp; 1.2. meet the conditions for participation in the procedure regarding: 1.2.1. competences or authorizations to conduct a specific professional activity, if it results from separate provisions - the Employer will not confessa particular condition in this respect. 1.2.2. economic or financial situation The Purchaser does not set a detailed condition in this respect. 1.2.3. technical or professional capacity a) regarding the technical capacity condition: The Employer will consider that the Contractor will meet the condition if he demonstrates that within the last 3 years before the deadline for submission of tenders, and if the period of conducting activityhe is shorter - in this period, he has made a minimum of one delivery of at least 35 (thirty-five) dental units with a value of not less than PLN 2, 500, 000.00 gross (in words: two million five hundred thousand zlotys PLN 00/100 gross). By the value of delivery, the Purchaser means the total value of deliveries made under one contract. By one delivery, the Ordering Party understands the sum ofaw under one contract. b) regarding the condition of professional capacity: The Employer considers that the Contractor will meet the condition if he demonstrates that he will send a minimum of 2 (say: two) persons with a minimum of 5 years of professional experience in the field of service for the assembly and maintenance of dental units. For the purposes of items a and b above through the unitatological The Purchaser understands the set consisting of a patient`s chair, doctor`s table, assistant`s panel, operating lamp, spittoon block, foot control with a minimum number of end pieces necessary for full functioning. 2. The Employer may, at any stage of the procedure, consider that the Contractor does not have the required capacities if the involvement of technical or professional resources of the Contractorcontractors in other economic activities of the Contractor may have a negative impact on the performance of the contract. 3. In the case of Contractors jointly applying for the contract: 3.1. the conditions for participation in the procedure referred to in point 1.2 above must be met by contractors, including the reservation that one Contractor or one entity providing resources must have full experiencethe benefit indicated in the condition of participation in the procedure referred to in item 1.2.3 a); 3.2. no grounds for exclusion from the procedure for awarding the contract to the Contractor in the circumstances referred to above in point 1 point 1.1 and in chapter X point 1 points 1.1-1.4, i.e. referred to in art. 24 paragraph 1 and item 5 points 1), 5) and 8) of the Public Procurement Law, must be demonstrated by each of the Contractors. 4. The Contractor may confirm the fulfillment of the conditions referred to above in point 1.2.3. where applicable, and in relation to a particular contract, or part thereof, rely on the technical or professional capacity or financial or economic situation of other entities, irrespective of the legal nature of the legal relationship with it. 5. Employer at the same time andinforms that the "relevant situation" referred to in item 4 above will occur only if: in particular, presenting the undertaking of these entities to make available to them the necessary resourcesand the needs of the contract. 5.2 The contracting authority will assess whether the technical or professional capacity made available to the contractor by their entities or their financial or economic situation allow the Contractor to demonstrate compliance with the conditions for participation in the procedure and will examine whether there are grounds for exclusion for this entity, o referred to in art. 24 paragraph 1 point 13 22 and par. 5 points 1), 5) and 8) Pzp Cd. from point II.1.1) X. GROUNDS FOR EXCLUSION REFERRED TO IN ARTICLE 24 PAR. 5 Public Procurement Law 1. The contracting authority provides, additionally, based on art. 24 paragraph 5 points 1), 5) and 8) of the PPL, exclusion of the Contractor: 1.1. in relation to which liquidation has been opened, the arrangement approved by the court in the restructuring proceedings provides for satisfaction of creditors by the liquidation of its assets orb the court ordered the liquidation of his property pursuant to art. 332 paragraph 1 of the Act of May 15, 2015 Restructuring Law or whose bankruptcy was announced, with the exception of the Contractor, who after the declaration of bankruptcy concluded the arrangement approved by a final court decision, if the arrangement does not provide for satisfaction of creditors by the liquidation of the assets of the bankrupt, unless the court ordered the liquidation of his assetspursuant to art. 366 section 1 of the Act of February 28, 2003 Bankruptcy Law, 1.2. who, for reasons attributable to him, did not or improperly significantly performed the previous public procurement contract or concession contract concluded with the contracting authority referred to in Article 3 clause 1 points 1-4, which led to the termination of the contract or the award of damages; 1.3. which oneviolated the obligations regarding the payment of taxes, fees or social security or health insurance contributions, which the Awarding Entity is able to demonstrate by means of appropriate evidence, except in the case referred to in art. 24 paragraph 1 item 15) of the PPL, unless the Contractor has made payments of taxes, fees or social security or health insurance contributions together with interest orin law or entered into a binding agreement regarding the repayment of these debts. XI. LIST OF STATEMENTS OR DOCUMENTS CONFIRMING MEETING THE CONDITIONS FOR PARTICIPATION IN THE PROCEEDINGS, NO GROUNDS FOR EXCLUSION AND OTHER Statements and documents submitted with the offer: 1. The Contractor, in order to confirm compliance with the conditions for participation in the proceedings specified in Chapter IX of the ToR, and to demonstrate the lack of grounds forexclusions, submits together with the offer a current statement as at the date of submitting the offers in the form of a single European order document (EAT). In order to make a statement: a) download from the Platform an XML file called "EAT" (save on your computer); b) go to the website https://espd.uzp.gov.pl/; c) choose Polish by clicking Polish; d) select "I am a performer"; e) choosethe option "import ESPD"; f) load (import) a document EAT file previously downloaded from the Employer`s website and saved on your computer by clicking g) follow the instructions in the tool; h) when completing the form EAT, the Contractor may use instructions for its completion posted by the Public Procurement Office on the website at: https: // www.uzp.gov.pl / __ data / assets / pdf_file / 0015/32415 / Instructions-filled-in-JEDZ-ESPD.pdf i) JEDZ statement NOTE: The Employer recommends that the Contractor, completing the EAT, confines himself to completing in Part IV: "Qualification criteria" only point α: "General statement regarding liceof the Qualification Criteria `and does not need to comply with Sections A, B, C and D. 1.1. In relying on the capacities or situation of other entities referred to in Chapter IX, point 5.1, the contractor will make a commitment on the part of those entities to make available to him the necessary resources implementation of the contract. 1.2 In the case of jointly applying for the contract by the Contractors, a statement about whichreferred to in item 1, is submitted by each of the Contractors jointly applying for the order. The statement is to confirm the fulfillment of the conditions for participation in the procedure, the lack of grounds for exclusion to the extent that each of the Contractors demonstrates compliance with the conditions for participation in the procedure, and the lack of grounds for exclusion. Cd. from point II.1.3) 14.6 the obligation to provide by the Contractor`s personal data directly applicableof the Contractor is a statutory requirement specified in the provisions of the PPL Act related to participation in the public procurement procedure; the consequences of not providing specific data result from the Public Procurement Law, 14.7 with respect to the Contractor`s personal data, decisions will not be taken in an automated manner, applying to art. 22 GDPR, 14.8 has the Contractor: - pursuant to art. 15 GDPRregarding access to the Contractor`s personal data regarding , pursuant to art. 16 GDPR, the right to rectify the Contractor`s personal data, - pursuant to art. 18 of the GDPR, the right to request the administrator to limit the processing of personal data, subject to the cases referred to in art. 18 clause 2 GDPR, - the right to lodge a complaint to the President of the Office for Personal Data Protection, if the Contractor considers thatthe processing of personal data of the Contractor regarding the violation of the provisions of the GDPR. 14.9 the Contractor is not entitled to: in connection with art. 17 clause 3 lit. b, d or e GDPR the right to delete personal data, - the right to transfer personal data referred to in art. 20 GDPR, - pursuant to art. 21 GDPR, the right to object to the processing of personal data, as the legal basis for the processing of the Data Contractorpersonal is art. 6 clause 1 lit. c GDPR. 14.10 In the event that the performance of the obligation referred to in art. 15 paragraph 1 3 GDPR, it would require a disproportionate effort, the Employer may request the data subject to provide additional information aimed at specifying the request, in particular the date or name of the public procurement procedure. Withdrawal fromthe request referred to in art. 18 clause 1 GDPR does not limit the processing of personal data until the end of this proceeding. VII. SUBCONTRACTING 1. The contractor may entrust the performance of part of the contract to a subcontractor or subcontractors. 2. The Employer requests the Contractor to indicate in the offer the parts of the contract which it intends to entrust to subcontractors or subcontractors, and to provideby the Contractor of subcontractors in accordance with the content of the statement referred to in chapter XI of the ToR (lit. A point 1. III. INFORMATION ON THE METHOD OF CONTRACTING THE CONTRACTING PARTY WITH THE CONTRACTORS AND THE TRANSMISSION OF STATEMENTS OR DOCUMENTS 1. The proceedings are conducted in Polish via the Purchasing Platform (hereinafter referred to as "Platform", "System") at: https://umlub.eb2b.com.pl underthe number of proceedings UM-ZP-262-12 / 20. 2. The use of the Platform by the Contractor is free of charge. 3. Communication between the Employer and the Contractors takes place in electronic form with respect to all declarations, applications, notifications and information.the body of other content than specified in the instructions for using the Platform, the Employer shall consider as binding the information that has been submitted in the form and on the terms set out in the ToR. 4. Offers, statements and documents in the said procedure shall be submitted using electronic means of communication in accordance with the instructions described in point 6, the offer and statement in the form of a uniform EuropThe European Order Document (EAT) shall be made, under pain of nullity, in electronic form and shall have a qualified electronic signature. I. NAME (COMPANY) AND ORDERING PARTY ADDRESS 1. Name: Dental Clinical Center of the Medical University of Lublin, hereinafter referred to as the "Employer", on behalf and for which it operates the Medical University of Lublin hereinafter referred to as "Proxyem ". 2. Address of the Employer: Dental Clinical Center of the Medical University of Lublin 20-081 Lublin, 7 Karmelicka Street 3. Proxy`s address: Medical University of Lublin 20-059 Lublin, Aleja Racławickie 1 Internet address (URL): www.umlub.pl
The bid deadline for Contract notice: Dental chairs was 15 May 2020. Bidding is closed.
This tender has been issued by STOMATOLOGICZNE CENTRUM KLINICZNE UNIWERSYTETU MEDYCZNEGO W LUBLINIE UL. KARMELICKA 7, 20-081 LUBLIN PEŁNOMOCNIK PRZYGOTOWUJĄCY I PRZEPROWADZAJĄCY POSTĘPOWANIE: UNIWERSYTET MEDYCZNY W LUBLINIE in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 33192410 - Dental chairs, 33131152 - Dental scalers, 33126000 - Stomatology devices, 33136000 - Rotary and abrasive instrument.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 42163854. The purchaser document reference is 170969-2020.