Contract notice: Construction structures Tender - 42701229
Tender notice from Switzerland, published on 07 May 2020.
Executive Summary
The ARMASUISSE ACHATS ET COOPÉRATION CC WTO has issued a Tender notice for the procurement of a Contract notice: Construction structures and materials; auxiliary products to construction (except electric apparatus) in the Switzerland. This Tender notice was published on 07 May 2020 and is scheduled to close on 17 Jun 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 42701229, while the tender notice number is 213525-2020 and Register on the platform.
Key facts
Summary
Contract notice: Construction structures and materials; auxiliary products to construction (except electric apparatus)
Object of the contract Construction structures and materials; auxiliary products to construction (except electric apparatus) Description: Contract notice: Construction structures and materials; auxiliary products to construction (except electric apparatus) Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: Agreement between the European Union and the Swiss Confederation Award criteria: The most economic tender CPV code: 44000000, 44160000, 44165000, 44000000, 44160000, 44165000 CPV Description: Construction structures and materials; auxiliary products to construction (except electric apparatus). Pipeline, piping, pipes, casing, tubing and related items. Hoses, risers and sleeves. Elaflex / Continental pipes and fittings Elaflex / Continental pipes and fittings are used for all fuel depots / tank vehicles / tank systems used by the am armyse. The material of the manufacturer Elaflex / Continental (pipes and fittings) is introduced and meets high requirements in terms of quality. Main Site: According to the documents. The pipes and fittings of the brand Elaflex / Continental are used for all deposits of fuels / tank-vehicles / tank systems used by the Swiss army. The material of the manufacturer Elaflex / Continental (tuyasupply and fittings) is introduced and meets high quality requirements. In order to guarantee the availability of fuel depots / tank vehicles / tank systems used throughout Switzerland, it is advisable to ensure the supply of parts spare parts for pipes and fittings. The proofs and proofs of suitability listed below must be provided in full withquotation, without restrictions or modifications, without which it will not enter into matter on the quotation. CAP1: extract from the prosecution register and the commercial register or equivalent official act issued by a foreign authority which certifies that the tenderer has no tax debts or related to unpaid social contributions (no older than three months, the date of filing of the offerbeing decisive). CAP2 a) Respect for the principles governing the procedure The tenderer certifies that he and the third parties he solicits (subcontractors and suppliers) comply with the conditions governing the procedure in accordance with the document (annex 1.1.1) from the Confederation`s Purchasing Conference (CA); b) Additional proof of respect for equal pay for womens and men Bidders and their first sub-contractors who each have more than 50 employees must demonstrate, beyond the document, how they have examined their salary practice and that the tolerance threshold of 5% is respected as part of the contract. CAP3: declaration by the tenderer. CAP4: the tenderer certifies that he assumes overall responsibility, i.e. in particular that the tenderer is the sole contractual partner of the adjudicating body. Any persons involved must be indicated in Annex 1.1 with the roles and functions assigned to them. CAP5: the tenderer certifies that he is able to fulfill and comply with the logistical requirements described in the specifications. CAP6: the submissionnaire certifies that he will only offer and deliver original Elaflex / Continental equipment. If the material supplied is not of the Elaflex / Continental brand, the supplier assumes responsibility for direct and indirect damage. CAP7: the tenderer certifies that he will join the offer with an original Elaflex / Continental price list. CAP8: the tenderer certifies that he has his owntest facility for pipes or unlimited access to an external test facility for filling pipes. CAP9: the tenderer certifies that he will produce ready-to-use pipes in the quantities and dimensions required in accordance with individual orders and that he will be able to deliver them tested according to DIN EN 12115 and EN ISO 1825. CAP10: the tenderer hastest that it will supply and deliver the required test certificates in accordance with DIN EN 12115 and EN ISO 1825. CAP11: the planned material (cut goods and material in roll) must not have been produced more than six months previously ( quarterly marking of the pipes). CAP12: the non-planable material (cut goods and material in roll) must not have been produced more thane 24 months before (quarterly marking of pipes). CAP13: the tenderer certifies that he will provide technical assistance throughout Switzerland during office hours, Monday to Friday from 7:00 a.m. to 5:00 p.m. by telephone and, if necessary, on site and that it will provide information on new products and standards in force every three months. CAP14: the tenderer certifiesthat he is able to deliver the planned material (see annex 2.0) to the delivery addresses, in accordance with individual orders, throughout Switzerland within 30 working days from receipt of the order (does not apply not to tailor-made products). CAP15: the tenderer certifies that he is able to deliver the material which cannot be planned (small quantities)s supplement to delivery addresses, in accordance with individual orders, throughout Switzerland within five working days of receipt of the order. It is therefore possible to order specific lengths of pipes and fittings (no minimum order quantity). CAP16: The tenderer certifies that the defective book material will be replaced free of chargewithin two working days of the detection of the defect. CAP17: the tenderer certifies that he has the capacities (staff) and premises necessary to provide the services required in the tender documents. CAP18: The tenderer consents to the requesting principal / service being able to check the confirmed aptitude criteria CAP5, CCAP8, CAP10 and CAP17on site during the evaluation phase and throughout the duration of the contract. CAP19: the tenderer certifies that he accepts without reserve the model contract according to annex 4.0. CAP20: The tenderer certifies that he accepts the general conditions of the Confederation. CG relating to the purchase of goods (edition: Sept. 2016) Partial offers are not allowed. Conditions for countries n`having not acceded to the WTO agreements: none. Negotiations: remain reserved. Conditions governing the procedure: the contracting authority awards public contracts for services in Switzerland only to contractors who guarantee compliance with the provisions on the protection of workers, working conditions and equal pay for men and women. Other indications: according to the documents. Closing deadline for the deposit of offers / remarks: place of deposit: see the 1.2 important figure for the respect of the deadline of deposit: a) In case of deposit in hands in armasuisse (administrative center Guisanplatz 1): when handing over to, Guisanplatz 1, 3003 Berne, for the attention of CC WTO Armasuisse, the following points must be observed: - the tenderer mustIt should be announced at the main box, Guisanplatz 1, indicating the title of the project. It will then be redirected to the; - the delivery must be made no later than 3:00 p.m. on the day of the delivery date mentioned in point 1.4, against delivery of an acknowledgment of receipt by the Ramp Management; - hours opening hours of the ramp management: 7 a.m. - 12 p.m. - 1 p.m. - 3 p.m. (outside these hours, noan offer cannot be submitted); b) Shipping by post: the postage stamp or barcode of the service provider carrying out the shipment is decisive (the date of the stamp affixed by the company is not authentic); c) In the event of delivery to a diplomatic or consular representation of Switzerland: - the certificate of receipt issued by the representation in question prevails; - the certificate ofThis receipt must be sent to the electronic address indicated in section 1.2 at the latest until the deadline for submission of the offer. Remarks (time limit for asking questions in writing): if questions appear during the development of the offer, they can be asked exclusively in the form of anonymous questions in the frequently asked questions on the simap.ch site Each questionmust be asked separately in the forum (one question per entry). The answers are given in the frequently asked questions on the simap.ch site All the questions and answers can be consulted by all the tenderers who have obtained the documentation for the call for tenders. The tenderer is himself responsible for informing himself of any questions and answers contained ins the frequently asked questions. National reference publication: SIMAP of 5.5.2020, doc. 1132095. Delai wishes to ask questions in writing: 8.6.2020. Conditions for obtaining the tender dossier: the documentation can be downloaded exclusively from the electronic platform www.simap.ch, section. To do this, you must first register in the project asstation and you can then access the documentation using the login and password that you will receive by email. A forum is available for questions. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Construction structures and materials; auxiliary products to construction (except electric apparatus) was 17 Jun 2020. Bidding is closed.
This tender has been issued by ARMASUISSE ACHATS ET COOPÉRATION CC WTO in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 44000000 - Construction structures and materials; auxiliary products to construction (except electric apparatus), 44160000 - Pipeline, piping, pipes, casing, tubing and related items, 44165000 - Hoses, risers and sleeves.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 42701229. The purchaser document reference is 213525-2020.
This tender falls under Materials and Products in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.