Contract notice: Computer equipment and supplies Tender - 37758673
Tender notice from Switzerland, published on 06 Nov 2019.
Executive Summary
The ARMASUISSE ACHATS ET COOPÉRATION CC WTO has issued a Tender notice for the procurement of a Contract notice: Computer equipment and supplies in the Switzerland. This Tender notice was published on 06 Nov 2019 and is scheduled to close on 13 Jan 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 37758673, while the tender notice number is 526576-2019 and Register on the platform.
Object of the contract Computer equipment and supplies Description: Contract notice: Computer equipment and supplies Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: Agreement between the European Union and the Swiss Confederation Award criteria: The most economic tender CPV code: 30200000, 30230000, 30190000, 30200000, 30230000, 30190000 CPV Description: Computer equipment and supplies. Computer-related equipment. Various office equipment and supplies. Blank and coin control system Swissmint currently operates a Visilab installation of Proditec dating from 2005 to ensure the quality control of blanks and coins. coins. No longer corresponding to the current state of the art, this installation must bereplaced. The timely replacement of a coin control facility must provide a secure and cost-effective solution in the long term. Main Site: According to the documents. Swissmint is currently operating a 2005 Visilab facility from Proditec for the control quality of blanks and coins. No longer corresponding to the current state of the art, thisThis installation must be replaced. The timely replacement of a coin control facility must provide a safe and cost-effective solution in the long term. The proof and evidence of fitness listed below must be provided in its entirety. with the offer, without restrictions or modifications, otherwise it will not enter the supply. CAP1, extract from theprosecutor and trade register or equivalent official deed issued by a foreign authority which certifies that the tenderer has no tax debts or is linked to unpaid social security contributions (not older than 3 months, the filing date of the tender being determinative). CAP2, declaration of the tenderer fully completed and validly signed. CAP3, certificatea single contact point (SPOC) for all business processes. CAP4, the bidder certifies that he / she bears overall responsibility for this project, ie. in particular that the tenderer is the only contractual partner of the tendering body. The prospective persons involved must be indicated in Annex 1.1), with the roles andfunctions attributed to them CAP5: a) respect for the principles governing the procedure. The tenderer certifies that he and the third parties he applies for (subcontractors and suppliers) comply with the conditions governing the procedure in accordance with the document (Annex 1.1.1) of the Confederation Procurement Conference (CA); b) additional proof of respect for pay equitye between women and men. Bidders and their first tier subcontractors, each of whom has more than 50 employees, must demonstrate beyond the document how they have reviewed their pay practices and that the 5% tolerance threshold is met within the scope of the contract. CAP6, the tenderer attests that he has at present sufficient experience in the deliveryof coin control facilities, in accordance with the technical specifications and instructions contained in the specifications. The tenderer must indicate at least 2 references per lot for which he has provided comparable services in the last 5 years (since 2014). CAP7, the tenderer certifies that he has a maintenance center withsales and service staff, as well as the ability to give free advice on product and user issues. Telephone availability must be guaranteed from Monday to Friday from 7:30 to 12:00 and from 13:30 to 17:00 at the usual local rates. The tenderer guarantees a maximum reaction time of 48 hours on account of thea request (subject to force majeure and external influences). CAP8, the tenderer certifies that: (a) the range of products he proposes will be available for at least 5 years (at least until 2024) (b) it is able to ensure the repair and maintenance, including spare parts, for 15 years (at least until 2034). CAP9, the tendercertifies that the proposed system fully complies with the. CAP10, the bidder certifies that it grants a guarantee of at least 2 years (24 months) on the control installation which is the subject of its offer, control modules inclusive, from the date of commissioning. CAP11, the bidder certifies that it will provide a declaration of conformity for the blank and feet inspection facility. CAP12, the tenderer certifies that he accepts the purchase contract (Annex 4.0). CAP13, the tenderer certifies that he accepts the maintenance and repair contract (Annex 4.1). CAP14 the tenderer certifies that he accepts the obligation to keep the tender documents secret (Annex 4.2). CAP15, the tenderer certifies that he accepts without restriction theGeneral conditions of confederation relating to ... Partial offers are not allowed. Conditions for countries not having acceded to the WTO agreements: none. Negotiations: remain reserved. Conditions governing the procedure: the contracting authority awards public contracts for services in Switzerland only to contractors who guarantee compliance with the provisionson the protection of workers, working conditions and equal pay for men and women. Other information: according to documents. Closing time for the submission of tenders / remarks: place of deposit: see section 1.2), important for the respect of the deposit period: a) in the event of a deposit in Armasuisse (Guisanplatz 1 administrative center): from handing over to, Guisanplatz 1, 3003 Berne, to the attention of the WTO Armasuisse CC, the following points must be respected: - the tenderer must announce himself at the main lodge, Guisanplatz 1, indicating the title of the project (see figure 7.1) . It will then be redirected to the, - the discount must be made no later than 15:30 hours the day of the date of delivery mentioned in point 7.3), against delivery of accuse of reception by the management of the ramps, - opening hours of the management of the ramps: 8: 30-16: 00 (outside these hours, no offer can be delivered). b) shipment by post the postage stamp or bar code of the service provider making the shipment is decisive (the date of the stamp affixed by the undertaking is not authentic); c) in the event of delivery to a diplomatic representationSwitzerland or Switzerland: the certificate of acceptance issued by the representation in question is authentic. The acknowledgment of receipt must be sent to the e-mail address indicated in section 1.2) at the latest until the deadline for submission of the offer. Remarks: (time required to ask questions in writing). If questions arise during the development of the offer, theycan be asked exclusively in the form of anonymous questions in the simap.ch site FAQs Each question must be asked separately in the forum (one question per entry). Answers are given in the Frequently Asked Questions at simap.ch All questions and answers can be viewed by all bidders who have obtained documentation forThe call for tenders. The tenderer is himself responsible for informing himself of any questions and answers in the frequently asked questions. National reference publication: SIMAP of 5.11.2019, doc. 1103229. Deadline wishes to ask questions in writing: 18.12.2019. Conditions for obtaining the bidding documents: the documentation can be downloaded exclusivelyfrom the electronic platform www.simap.ch, section. For this purpose, you must first register in the project in question and you can then access the documentation using the login and password that you will receive by email. A forum is available for questions. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Computer equipment and supplies was 13 Jan 2020. Bidding is closed.
This tender has been issued by ARMASUISSE ACHATS ET COOPÉRATION CC WTO in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 30200000 - Computer equipment and supplies, 30230000 - Computer-related equipment, 30190000 - Various office equipment and supplies.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 37758673. The purchaser document reference is 526576-2019.
This tender falls under Computer Hardware and Software Services in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.