Contract notice: Checking and testing apparatus Tender - 41637483
Tender notice from Bulgaria, published on 18 Mar 2020.
Executive Summary
The ТЕХНИЧЕСКИ УНИВЕРСИТЕТ — СОФИЯ has issued a Tender notice for the procurement of a Contract notice: Checking and testing apparatus in the Bulgaria. This Tender notice was published on 18 Mar 2020 and is scheduled to close on 08 May 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 41637483, while the tender notice number is 130150-2020 and Register on the platform.
Object of the contract Checking and testing apparatus Description: Contract notice: Checking and testing apparatus Authority Type: Body governed by public law Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union Award criteria: Lowest price CPV code: 38500000, 31681000, 38550000, 32420000, 38500000, 31681000, 38550000, 32420000, 31681300, 38510000, 38519310 CPV Description: Checking and testing apparatus. Electrical accessories. Meters. Network equipment. Electrical circuits. Microscopes. Photo attachments for microscopes. Delivery of specialized technological equipment at separate positions, according to technical specifications, for the needs of .... continued in section VI.3) Additional information The contract includes the following lots: Main Site: Frnco warehouse of the Employer city of Sofia, bul. Cl. Ohridski, № 8. Includes delivery, installation, installation, commissioning / operation of: 1.1. Gray box for probing station System to be: - electromagnetic shielding screen - compatible with Signatone probing station or equivalent (Cascade Microtech, Alessi, SUSS Microtech or other manufacturers) Connectivity requirements: - Availability of pangel for switching power and signal cables with BNC connectors. And all other technical requirements. spec. from the documentation for participation 1.2. Mechanical calibration kit. Frequency range: - lower limit - DC, - upper limit - 26 GHz or higher. Connector type: —3.5 mm (female), - impedance - 50 Ohm And all other technical requirements. spec. from the documentation for participation 1.3. CMW Broadband Radio Tester The configuration includes: 1.3.1. Spectral high frequency measurement software; 1.3.2. Connecting cable for high frequency measurements - 4 pieces; 1.3.3. Vacuum pump; 1.3.4. Positioner - North orientation; 1.3.5. Positioner - Southern orientation; 1.3.6. Surface mount impedance measurement plug; 1.3.7. Test misleading exoctopuses; 1.3.8. Test clamps for measuring impedance of integrated circuits. And all other requirements of technical. spec. from the documentation for participation. 1.4. Network analyzer The instrument should be: - Two-port vector network analyzer (VNA), which measures the following parameters: - S parameters: S11, S21, S22, S12, - amplitude and phase, - Frequency range: - lower backpack - 40 kHz or less, - darrays - 26.0 GHz or greater, - Output power, - in the 625 MHz to 3 GHz frequency range - greater than 2.5 dBm, - in the 3 GHz to 23 frequency range GHz - greater than 6 dBm, - in the 23 MHz to 26 GHz frequency range - higher than 10 dBm. And all other technical requirements. spec. guarantee period - minimum 12 months, from the date of signature of the bilateral ascertainment protocol for the installation, installation and commissioning of the delivered equipment. The contractor designated contractor shall provide warranty service and maintenance of the equipment supplied throughout the warranty period offered by him. All warranty / service costs and shipping supporto Equipment is at the contractor`s expense. The term for repairing the defect, defect or non-conformity of the equipment on site at the contracting authority may not be longer than 20 calendar days from the date of its finding by signing a bilateral statement of findings. Troubleshooting, defect, or non-compliance of service equipment may not exceed 120 calendarsdays from the date of its finding, with the signing of a bilateral protocol of findings. Whether the repair of the defect, defect or non-compliance can be done on-site with the contracting authority or it must be performed by a workshop, is reflected in the statement of findings. The maximum delivery time is up to 90 calendar daysand days from the date of registration of the contract in the records system of the contracting authority. Upon delivery of the equipment, a bilateral protocol is signed. The term for completion of the activities for installation, installation and putting into operation / operation of the equipment may not be longer than 30 calendar days and shall start from the date of signing of the bilateral protocol on the accomplished delivery.equipment. Upon entry into operation / operation of the equipment, a bilateral ascertainment protocol is signed. the item is distributed as follows: - for gray box for probing station - up to BGN 12, 000.00 without VAT, - for mechanical calibration kit - up to BGN 21, 000.00 without VAT, - for broadband radio tester CMW - up to BGN 77, 000.00 withoutVAT, - for network analyzer - up to BGN 68 000, 00 VAT excl. 1.001-0008 "National Center for Mechatronics and Clean Technologies" funded through Operational Program "Science and Education for Smart Growth" 2014-2020. Participants will be eliminated if any ofthe grounds under Art. 54, para. 1 of the PPA and Art. 107 of the Public Procurement Act (Article 55 of the Public Procurement Act does not apply), except in the cases explicitly stated in the Public Procurement Act. The contracting authority shall also remove from participation: "Offered Price Parameters" elements related to the Offered Price (or parts thereof), - Bidder who submitted a Technical Proposala woman who does not meet the requirements of the technical specification and the conditions of the contracting authority, - a tenderer who has offered a price higher than the maximum estimated value set by the contracting authority, - a tenderer subject to obstacles to public procurement, provided for in Art. 3, item 8 of ZIFODRUPDRTLTDS, unless they have applied exceptions under Art. 4 of it, - Participant, for coHowever, there are prohibitions under Art. 69, para. 1 and para. 2 of the CITAA. The circumstances under Art. 54, para. 1, items 1, 2 and 7 of the Public Procurement Act refer to the persons referred to in Art. 54, para. 2 of the PPA, in connection with Art. 40 of the PDAB. According to Art. 46 of the PPPOP the participants are obliged to notify the assignor in writing within 3 days from the occurrence of the circumstance under Art. 54, para. 1, Art. 101, para. 11 of the PPL. According to Art. 67, para. 1 of the Public Procurement Lawand submitting a tender, the participant declares the lack of grounds for removal by submitting an EDES. It shall provide the relevant information required by the contracting entity and indicate the national databases containing the declared circumstances or the competent authorities which, under the law of the country in which the participant is established, are obliged to supply the informationornamentation. The contracting authority may require, at any time after the opening of tenders, the submission of all or part of the documents proving the information specified in the EDES, where this is necessary for the lawful conduct of the procedure under Art. 67, para. 5 of the PPL. In case of participation of an association, which is not a legal entity, Art. 59, para. 6 of the PPL. Subcontracting is applicableArt. 66 of the PPL. The provisions of Art. 65 of the Public Procurement Act. Offers are submitted to: Sofia, Blvd. Cl. 8 Ohridski Str., Technical University - Sofia, office 1317 - office management. Internet address (URL): www.tu-sofia.bg
The bid deadline for Contract notice: Checking and testing apparatus was 08 May 2020. Bidding is closed.
This tender has been issued by ТЕХНИЧЕСКИ УНИВЕРСИТЕТ — СОФИЯ in Bulgaria.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 38500000 - Checking and testing apparatus, 31681000 - Electrical accessories, 38550000 - Meters, 32420000 - Network equipment, 31681300 - Electrical circuits, 38510000 - Microscopes, 38519310 - Photo attachments for microscopes.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 41637483. The purchaser document reference is 130150-2020.
This tender falls under Technology and Equipment, Defence and Security, Computer Hardware and Software Services in Bulgaria. Suppliers in these sectors can track similar Bulgaria tenders using CPV-based alerts.