Procurement Summary
Country : Montserrat
Summary : Construction of an Air Traffic Control Tower at the John A. Osborne Airport in Montserrat
Deadline : 11 Dec 2019
Other Information
Notice Type : Tender
TOT Ref.No.: 38005300
Document Ref. No. :
Competition : ICB
Financier : Self Financed
Purchaser Ownership : -
Tender Value : Refer Document
Purchaser's Detail
Purchaser : MINISTRY OF COMMUNICATION, WORKS, ENERGY AND LABOUR(GOVERNMENT OF MONTSERRAT)
Brades, Montserrat
Contact:Head of Procurement, Ms. Harjinder Jutle.
Tel: 1-664-491-2521/2522
Montserrat
Email :jutleh@gov.ms
Tender Details
Request for Proposal for Construction of an Air Traffic Control Tower at the John A. Osborne Airport in Montserrat.
Scope of Work:
The scope requires the construction of a multi-level, standalone Air Traffic Control Tower with internal access to a roof top prefabricated Control Cab. Construction is traditional in situ placed reinforced concrete with infills of concrete block and steel, reinforced concrete floors, and reinforced cantilevered roof slab with upstand beams to support a nine (9) tonne (20, 000 lbs) prefabricated cab. Works to include the placement and fixing of the prefabricated cab at roof level, as well as the connection and commissioning of all associated services within, with the exception of air traffic control equipment. The installation of an elevator and surrounding civil works to be executed as options (alternates) upon the request of The Authority. These works are to be done at JAO Airport in Gerald’s, Montserrat.
This project has five (5) distinct components:
ï‚· Architectural (A) works,
ï‚· Structural Engineering (S) works,
ï‚· Mechanical, Electrical, Plumbing Engineering (MEP) works, to include but not be
limited to mechanisms for fresh air Ventilation, Air-Conditioning, Lightning Protection,
Fire Protection, Telecoms, Security and the installation of an elevator,
ï‚· Civil Engineering (C) works,
ï‚· Placement and Fixing of a nine (9) tonne (20, 000 lbs) fully up fitted and finished
Prefabricated Cab to a height of approximately fifty (50) feet above ground level, and
connection of all associated MEP services provided within (air traffic controlequipment excluded). A Spreader Beam Assembly, to be used specifically for lifting the Prefabricated Cab into place onto the proposed shaft, is available on-site. Air- conditioning units, as well as all associated bolts and fixings for the cab have been
supplied by the manufacturer (AJT Engineering Inc.).
Documents
Tender Notice