Expired Tender Slovakia ICB TOT Ref. 4238957

Artificial joints Tender in Slovakia - 4238957

Tender notice from Slovakia, published on 05 Nov 2015.

Exeutive Summary

The Nemocnica Poprad a.s. has issued a Tender notice for the procurement of a Artificial joints in the Slovakia. This Tender notice was published on 05 Nov 2015 and is scheduled to close on 18 Dec 2015, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 4238957, while the tender notice number is 388370-2015 and Register on the platform.

Key facts

Summary
Artificial joints
TOT Ref. No.
4238957
Document Ref. No.
388370-2015
Country
Slovakia
Notice type
Tender
Competition
ICB
Publication date
05 Nov 2015
Bid deadline
18 Dec 2015
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract

1.1 TEP hip joint Cemented I .: The stem cementation with a collar and a vertical groove, material corrosion resistant steel, modular system with interchangeable heads .: Head diameter 28 mm at least 5 sizes with well cementation .: 7 centralizer at least 7 in graduated sizes for 2 mm, and the variation with offset 10 degrees and in the variant self-locking Antillesuxačnej, material crosslinked polyetylen.Predpokladane quantity: 12 pieces on 12 mesiacov.1.2 TEP hip cementation II .: The stem cementation without collar, corrosion-resistant steel material, at least in 6 sizes, distal portion of the hole for fixing centralizer, the proximal opening for introduction, centralizer at least 5 sizes, material polymethyl methacrylate, modUlarn system with interchangeable heads .: Head diameter 28 mm at least 5 sizes with well cementation .: 7 centralizer at least 7 in graduated sizes for 2 mm, and the variation with offset 10 degrees and in the variant self-locking antiluxačnej, material crosslinked polyethylene .Predpokladane quantity: 12 pieces on 12 mesiacov.1.3 TEP hip joint Cemented III.: Polyethylene UHMWPE well with X-ray contrast stripes .: inner diameter of the hole, 28 mm, 32 mm, size 44 mm 62 mm .: cementation shaft with highly polished surfaces, the type of triple tapered cone .: 12.14 mm, size 8, 10 12, 14, 16 .: prosthesis length 130-150 mm angle CCD .: 135 .: bottleneck centralizer reduces the risk of rupture cement fillings .: capital femoral komponenty metals from CoCrMo alloy, head diameter of 28 mm, 32 mm, 36 mm. Size S, M, L, XL, XL.Predpodkladane quantity: 12 pieces on 12 mesiacov.1.4 hybrid TEP hip .: I acetabular component zlatino titanium (Ti6Al4V) Porous Titanium with injections (pressfit fixation) .: Also available acetabular component with a surface layer mikrokalciumfosfatovou.: Acetabular inserts of UHMWPE, UHMWPE-XE polyethylene with internal diameter of 22 mm, 28 mm, 32 mm, 36 mm, 40 mm symmetrical, asymmetrical (such as 10 st.) In size of 40 70 mm .: Fixation screw in titanium alloy. : Cemented stem with a highly polished surface, the type of triple tapered cone .: 12.14 mm, size 8, 10, 12, 14, 16 .: prosthesis length 130-150 mm angle CCD .: 135 .: bottleneck centralizer reduces the risk of rupture cement fillings .: Option navigational support navigational systems with active, passive and hybrid .: komunikacie capital femoral component metals of zlatino CoCrMo, head diameter 28 mm, 32 mm, 36 mm size S, M, L, XL, XL.Predpodkladane quantity: 12 pieces on 12 mesiacov.1.5 hybrid THRi?1/2joint II .: cementless version of the standard hole in the area (dysplastic), plastic alloy with titanium plasma coating, with three holes for use screws with the possibility of blind, removable liner and with the possibility of offset 10 degrees, material crosslinked polyethylene .: collarless stem cementation Material hinges, at least in 6 sizes, distalna of the hole for fixing centralizer, the proximal opening for introduction, centralizer at least 5 sizes, material polymethyl methacrylate, a modular system with interchangeable heads .: Head diameter 28 mm at least 5 sizes with well cementation .: 7 centralizer at least 7 in graduated sizes of 2 mm, the variation with offset of 10 degrees, anda variant of the self-locking antiluxačnej, material crosslinked polyetylen.Predpodkladane quantity: 12 pieces on 12 mesiacov.1.6 cementless THR hip .: I acetabular component zlatino titanium (Ti6Al4V) Porous Titanium with injections (pressfit fixation), : Also available acetabular component with a surface layer mikrokalciumfosfatovou, : acetabular inserts ofUHMWPE, UHMWPE-XE polyetylenu s vnutornym priemerom 22 mm, 28 mm, 32 mm, 36 mm, 40 mm symetricka, asymetricka (typu 10 st.) vo veľkostiach 40 70 mm, .: FIxačna skrutka z titanovej zliatiny.: Driek z titanovej zliatiny (Ti6Al4V), konus 12/14 mm, s povrchovym poroznym nastrekom z čisteho titanu (Isotan P: Ti / ISO 5832-2, prevedenie drieku: štandartne, dysplasticke, ai?1/2Revision .: Also available extension shaft with shaft offset .: Direct Fit philosophy and not fill, with lateral wings and reinforcements in the proximal part of the stem for primary FIXACIU .: Auditing shaft must be able to ensure the distal screw using cieliča without the need for C-arm .: Option navigational support navigational systems with active, passiveej .: komunikacie and hybrid capital femoral components Al2O3 ceramic, head diameter 28 mm, 32 mm, 36 mm, 40 mm size S, M, L, XL acetabular inserts .: Al2O3 ceramic with internal diameter of 28 mm, 32 mm and 36 mm, 40 mm Symmetrical .: capital femoral component metals of zlatino CoCrMo, head diameter 28 mm, 32 mm, 36 mm Sizes S, M, L, XL, XL.Predpodkladane množstvo 196 Units in 12 mesiacov.1.7 cementless hip TEP II .: acetabular component from titanium alloy (Ti6Al4V), with a titanium porous injections (pressfit fixation) .: Also available acetabular component with a surface layer mikrokalciumfosfatovou .: Fixation screw titanium Alloy .: Al2O3 ceramic acetabular inserts with internal diameter of 28 mm, 32 mm a 36 mm, 40 mm : symetricka.: Necementovany driek z titanovej zliatiny (Ti6Al4V) stabilizacia implantatu medialne a horizontalne dražky, prevedenie drieku štandardny, lateralizovany.: Konus 12/14 mm.: Driek s hydroxylapatitovym nastrekom.: 8 veľkosti drieku o dĺžke 134 169 mm.: Prevedenie drieku: štandardne s CCD uhlom 134, lateralizovane s CCD uhlom 134.: Možnoclinic navigation support navigation systems with active, passive and hybrid .: komunikacie capital femoral components Al2O3 ceramic, head diameter 28 mm, 32 mm, 36 mm, 40 mm size S, M, L, XL .: capital femoral component metals of zlatino CoCrMo, head diameter 28 mm, 32 mm, 36 mm Sizes S, M, L, XL, XL .: acetabular inserts of UHMWPE, UHMWPE-XEpolyethylene with internal diameter of 22 mm, 28 mm, 32 mm, 36 mm, 40 mm symmetrical, asymmetrical type 10 st.) in sizes 40 70 mm.Predpodkladane quantity: 46 pcs to 12 mesiacov.1.8 TEP cementless hip stem III .: cementless collarless, in a design of standard and narrowing mediolateral direction in a wedge-shaped side view of the proximal portion, i?1/2slazmatickym sprayed titanium in the proximal part, material titanium alloy, modular system with interchangeable heads and metal heads .: .: Ceramic ceramic head diameter of 28 and 32, 36 mm in at least 3 sizes .: cementless version of the standard hole in the area (dysplastic) Housing made of titanium alloys, titanium plasma coating, with three Otvormeand the use of screws with the possibility of blind, removable liner and with the possibility of offset 10 degrees, crosslinked material polyetylen.Predpodkladane quantity: 59 pcs to 12 mesiacov.1.9 cementless hip TEP IV .: pressfitova cementless socket made of titanium alloy size 40:68 mm .: Primary blinded fixation screw holes on Acetabulum .: povrćehu mechanically fixed with titanium plasma coating with a porosity of 100 1 000 m .: Fitting polyethylene insert into the metal locking system as well systemom .: Antiluxačna version .: Delta Ceramic Ceramic heads in three sizes 28 mm 32 mm: 36 mm Ceramic .: headers at least three offsets .: polyethylene insert type of highly crosslinked polyethylene (HXLPE).: Direct shaft type flat wenge (areas wedge) for the right and left side, cone 12/14, CCD .: 138 Ti alloy sprayed mechanically fixed to the proximal portion of the stem, porosity 100 1000 m.Predpodkladane quantity: 154 pieces to 12 months. 1:10 cementless hip TEP V .: A concept well, allowing various indications (primary, reconstruction, revision, dysplastic, hereMorozov, trauma) .: Volume holes .: 41:69 cementless version is treated with one coat spray HA and one layer of Ti spraying .: 22.2 and 28 mm heads and liners .: The concept of the double-movement form .: Pressfit wells E RECONSTRUCTION hole fixation at three points .: Auditing hole fixation in seven points. cortical screws and two pins stem .: 10 standard size 8 to sizei?1/2.: prolonged neck of the Round conical neck smooth and highly polished: versions: standard, with prolonged neck to collar, : 22.2 and 28 headers (ceramics, stainless steel, chrome-cobalt) .Predpodkladane quantity: 60 pcs to 12 mesiacov.1.11 cementation TEP knees I .: The fully anatomically modern design všetkych components complying with the most modern criteria, with a constant distance povthe surface to be the center of the femoral component of the knee joint rotations .: 7 the size of the femoral component (material: CoCrMo alloy ISO5832-4) in anatomical prevedeni t. j. The left and right-hand versions, each the size of CR and PS prevedeni .: 5 basic sizes tibial (CoCrMo alloy material ISO5832-4) and four components plus medzikomponenty .: femoral component also somethingntovanom prevedeni s vnutornym titanovym nastrekom (Isotan P: Ti / ISO 5832-2) anatomicka varianta femuru, t. j. prave a ľave komponenty v prevedeniach so zachovanim PCL typ CR a s resekciou PCL typ PS.: Štandardne 5 veľkosti polyetylenovych tibialnych vložiek (material: UHMWPE, ISO 5834-2) typu LC 10 mm, 12 mm, 14 mm, 16 mm (na vyžiadanie tiež hrubky 18 mm, 20 mm) sIntegrated sagittal inclination 3 .: 5 sizes polyethylene tibial inserts (material: UHMWPE, ISO 5834-2 Type PS 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm) patellar .: 4 sizes with three-point mountings (material : UHMWPE, ISO 5834-2), the shape of the patella patellar pain preventing .: components and instrumentation for navigation is fully compatible with the possibility of active pasive and hybrid navigation sensors .: femoral and tibial component also available in anti-allergic version (zirconium oxide), precision instrumentation with the possibility of balancing maekkych tissues, with the possibility of a mini-invasive Usage .: CR in designs, PS, RP, UC, DD.Predpodkladane Quantity: 280 pieces to 12 mesiacov.1.12 Cemented total knee preserving Option II .:and ligamentum Vaez and replacing LCP option. Possibility to operate variant of preserving the LCP and subsequently at any time during the operation opted for a variant of LCP and replacing one easy step to adjust the femoral condyle in the final version of the variant replacing LCP Vaez .: anatomical shape of the femoral and tibial components (Lateral trim Lave / Prain), rotational variation utilize asymmetrical tibial component .: sufficient size range (size 6) for rotationally variant size 5 .: Nahrada Patel Patel comes in four sizes .: The possibility of using navaezujuceho revision system combinable with primoimplantatom .: implantation is also possible through the use of computer navigation CAOS .: Continuous adjustment inHLA valgus femoral component in the range of 0: .: 9 Balancing template femoral component allowing for continuous scrolling AP resection and rotation components after 1 intramedullary and extramedullary .: targeting tibii.Femoralna Component :: 6 sizes in L / P prevedeni, : Material cobalt chromium-molybdenum alloy according to ISO 5832-4.Tibialna Component :: 6 sizes in L / P prevEden, the rotation variation in sizes 5 Asymmetric, : Titan zliatinav Material: Ti6Al4V: ISO 5832-3.Artikulačna liner :: 6 sizes in L / P versions, for rotation option 5 sizes in symmetrical design of, : thickness of 8, 10, 12, 15, 18 mm, the variation in rotation thickness of 8, 10, 12, 15 mm Material, : ultrahigh-molecular polyethylene according to ISO 5834-2, : UcHyten insert the tibial component using skrutky.Predpodkladane quantity: 126 pcs 12 mesiacov.1.13 Cemented total knee III.Koleno cemented anatomical fixed salary with the possibility of transferring CR-UC-ultrakongruentne, .: PS knee system with a high range of implants .: Anatomic knee .: Femur left and right, design viacpolomoerovych with one continuous radiusOM at the point of articulation .: same space for extension and flexion at -20 to 90 with minimal bone resection 9 mm from the distal and posterior condyles .: 5 sizes: A, B, C, D, E. Execution CR, PS .: The variable Q-angle reduces the risk of patella-femoral pain or dislocation of the patella .: PE liner made of highly compressed polyethylene UHMW PE with a cup shape upngofth tibia to illustrate by specifying the 4-point system .: Tibia with round shank and a small lamellae, 4-point fixation fillers, thickness 1.5 mm Cement .: sizes 64, 70, 75, 80, 85 mm .: Tibia versatile for design CR, UC, PS.Predpodkladane quantity: 60 pcs to 12 mesiacov.1.14 cementless total knee .: metal parts are made of a mixture chromkobaltu plate allowing rotation-.:rotation to 20, Kym comes into contact with the tissues of maekkymi .: Dvojity spraying hydroxiapatite / Titan .: 5 sizes of femoral component for the left side and 5 sizes of femoral component for right .: 5 the size of the tibial component size 5 .: patella .: 25 sizes Mobile plato .: Instrumentarium not vaečšie than 3 sterile conditions koše.Predpodkladane quantity: 24 pcs nand 12 months.
Description: Artificial joints
Authority Type: Body governed by public law

Contact Nature: Supplies

Procedure: Open procedure

Document: Contract notice

Regulation: European Union

Award criteria: Lowest price

CPV code: 33141750

CPV Description: Artificial joints.  
Internet address (URL):

Directive: Classical Directive (2004/18/EC)

Documents

Tender Notice
Login to view

Similar tenders

Tender Country TOT Ref. No. Bid deadline
Electrodeless Stimulation System for Transcatheter Implantation Slovakia 152601116 20 Nov 2026
Medicines for the Respiratory System Slovakia 152592604 17 Dec 2026
Hygienic and Cleaning Products Slovakia 152592423 25 Nov 2026
Robotic Surgery Center for the Faculty of Medicine of the Comenius University Slovakia 152587318 01 Dec 2026
Intervention Accessories: Injector of Contrast Agent for Ct Slovakia 152580359 15 Dec 2026

Slovakia Public Procurement Intelligence

Frequently asked questions

The bid deadline for Artificial joints was 18 Dec 2015. Bidding is closed.

This tender has been issued by Nemocnica Poprad a.s. in Slovakia.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 33141750 - Artificial joints.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 4238957. The purchaser document reference is 388370-2015.

See the Similar Tenders section on this page or browse other tenders from Slovakia.

This tender falls under Materials and Products in Slovakia. Suppliers in these sectors can track similar Slovakia tenders using CPV-based alerts.