This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in far subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written (formal) solicitation will not be issued. This solicitation is issued as a request for quotation, (rfq), solicitation number fa7000-16-t-0043, in accordance with far parts 12 & 13. This solicitation document and incorporated provisions and clauses are those in effect through federal acquisition circular fac 2005-86, 1 february 2016. The north american industry classification system code (naics) is 316998 and the business size standard is 500. This is a 100% small business set aside acquisition. All responsible sources may submit a quote, which if received timely, will be considered by the 10th contracting division, 10 cons/lgcb, usaf academy (usafa).
The government bares no legal liability for bid costs associated with this request for quote. Vendors should not submit a quote unless they are willing to absorb all costs associated with submitting a quote. Quotes submitted with used, reconditioned, refurbished, gray market, or liquidated stock will not be considered for award.
This solicitation is being issued in accordance with (iaw) far parts 12 and 13 as a request for quote. Iaw far 13.004, in all instances throughout this solicitation any use of the word "proposal" should be understood as "quote". All instances of the word "offeror" should be understood as "quoter". All instances of the word "award" should be understood as "order". Quotes supplied in response to this solicitation are not binding. The requirement will be awarded to the quoter iaw 52.212-2, found herein.
Please read and comply with all requirements for submitting a quote. Failure to comply with all instructions contained within this synopsis/solicitation could result in the quote being ineligible for award. It is the offeror s responsibility to ensure their quote meets all the requirements identified herein.
Buy american act and certification of compliance is required and must be submitted with quote (see dfars clause 252.225-7001).
The usaf academy has a footlocker requirement to procure iaw pud 0001 dated 21 october 2011. Please provide pricing for the following line item:
line item 0001 quantity unit price extended price
footlockers iaw 1150 each $________ $________
pd 0001 dated 21 oct 11
attachment 1
total price ______________
the following federal acquisition regulation (far) clauses apply to this combined synopsis/solicitation and offerors must comply with all instructions contained in far 52.212-1, instructions to offerors--commercial items, addenda applies: the contractor shall submit their quote on company letterhead to include the following: solicitation number, contact name, address, telephone number of the offeror, unit price, extended price, any discount terms, delivery terms, cage code, duns number, tax identification number, size of business, past performance, warranty information and acknowledgement of solicitation amendments if required. The contracting officer is not responsible for locating or obtaining any information not identified in their quote.
Quotes must be received no later than 1:00 pm mountain standard time (mst), 16 february 2016, at the 10 cons/lgcb, 8110 industrial drive, saf academy, co 80840-2315. Please submit quotes by e-mail to sharon scheetz at
[email protected]. In her absence, please contact diana myles-south, contracting officer, (719) 333-8650 or email to
[email protected].
Addenda to far 52.212-1, proposal preparation instructions:
a. To assure timely and equitable evaluation of the proposal, the offeror must follow the instructions contained herein. Quoters are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements. Failure to meet a requirement may result in an offer being ineligible for award. Quoters must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. The quote shall consist of three (3) separate parts; part i - price, part ii - past performance, and part iii - contract documentation (representation and certification).
B. The contracting officer has determined there is a high probability of adequate price competition in this acquisition. Upon examination of the initial quotes, the contracting officer will review this determination and if, in the contracting officer s opinion, adequate price competition exists no additional cost information will be requested. However, if at any time during this competition the contracting officer determines that adequate price competition no longer exists; vendors may be required to submit information to the extent necessary for the contracting officer to determine the reasonableness and affordability of the price.
C. Specific instructions:
1. Part i - price - submit on company letterhead the unit price for each line item to include extended price with an overall total price.
2. Part ii - part ii - past performance information - past performance information - only references for recent and relevant contracts are desired. Quoters shall submit original and one (1) copy.
(a) quality and satisfaction rating for contracts completed in the past three years (from issue date of solicitation): provide information currently available (letters, metrics, customer surveys, independent surveys, etc.) which demonstrate customer satisfaction with overall job performance and quality of service for relevant past efforts/contracts (similar in scope and magnitude to the effort and complexities this solicitation requires). In addition, explain corrective actions taken in the past, if any, for substandard performance and any current performance problems such as cost overruns, etc.
(b) past performance surveys: the government will use information submitted by the quoter and any other sources of information available to the government to assess past performance. Provide a list of no more than five (5) of the most relevant contracts performed for federal, state and local agencies and commercial customers within the last three (3) years from the issue date of this solicitation. In the past performance information, directly link the past performance information submitted to the contractor having performed the effort, and tie the information to the work the contractor is proposed to perform in this effort. Furnish the following information for each contract listed:
(i) company/division name
(ii) services
(iii) contracting agency/customer
(iv) contract number
(v) contract dollar value
(vi) period of performance
(vii) verified up-to-date name, address, emails address, fax and telephone number (s) for each company point of contact.
(viii) comments regarding compliance with contract terms and conditions.
(ix) comments regarding any known performance deemed unacceptable to the customer, or not in accordance with the contract terms and conditions.
(x) if subcontractor, describe portion of the work performed.
Note: do not leave any of the above information blank. If not applicable to the specific contact request please state, "not applicable".
(c) in addition to the above information, the quoter shall mail attachment 2 of this solicitation, past performance survey, to the list of most relevant contract references. Instruct these references to complete the past performance survey and return to:
10 cons/lgcb
attn: sharon scheetz/diana south
fa7000-16-t-0043
8110 industrial drive, suite 200
usaf academy co 80840-2315
or via e-mail to
[email protected] or
[email protected](d) any past performance survey sent directly from a proposing quoter will not be accepted or evaluated. For the purpose of expediency of evaluation, please instruct references to respond to the past performance survey as soon as possible. No more than five (5) past performance surveys may be submitted per quoter. Completed past performance surveys shall not be reviewed by the quoter. Once the survey is completed, it is considered for official use only, and is only viewed by government personnel directly involved in the evaluation process for this acquisition. It is the sole responsibility of the quoters to ensure surveys are submitted by the solicitation closing date. The quoters are encouraged to follow-up with respondents for completed surveys.
(e) subcontractor consent: past performance information pertaining to a subcontractor cannot be disclosed to the primary quoter without the subcontractor s consent. Provide with the quote a letter from all subcontractors that will perform major or critical aspects of the requirement, consenting to the release of their past performance information to the prime contractor.
3. Part iii - contract documentation (representation and certification).
A. The provision at far 52.212-3, offeror representations and certifications - commercial items and its alternate i (alt i) must be completed. Vendors are highly encouraged to complete all representations and certifications electronically online at: (http://orca.bpn.gov/publicsearch. Aspx). If not completed online, 52.212-3 alt i shall be completed in hard copy and submitted with quote, which this provision is included within this solicitation. Subject provisions are available at http://farsite.hill.af.mil.
B. The provision at dfars 252.209-7991, representation by corporations regarding an unpaid delinquent tax liability or a felony conviction under any federal law-fiscal year 2016 appropriations (deviation 2016-00002) (oct 2015) must be completed and returned with quote. This provision is within this solicitation.
C. The provision at dfars 252.225-7000, buy american act-balance of payments program certificate must be completed, signed and returned with quote. This provision is included with this solicitation.
D. The system for award management (sam), contractors must be registered with sam to conduct business with the department of defense. No purchase order can be awarded to any company without this registration (www.sam.gov).
E. Provide a written statement that the offeror s proposal incorporates all amendments to the solicitation (if applicable).
F. Prices quoted must be firm-fixed price to include shipping and handling charges based on f.o.b destination. Quotes received with fob: other than destination, will not be considered.
G. Delivery is required by:
address:
10 msg/lgrmc - fx7000
mitchell hall annex, bldg 2351
usaf academy, co 80840
the provision at far 52.212-2, evaluation--commercial items apply to this acquisition
52.212-2 evaluation - commercial items (oct 2014)
a. The government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the government, price and other factors considered. The following factors shall be used to evaluate quotes:
past performance
price
past performance is significantly more important than price.
(end of provision)
addendum to 52.212-2 -- evaluation -- commercial items (oct 2014).
Basis for contract award: in accordance with far parts 12 and 13, the government is conducting a (best value) between price and past performance of quotes and past performance being signicantly more important than price. The evaluation process will proceed as follows:
1. Price evaluation. Initially, quoters shall be ranked according to price. An offeror s proposed prices will be determined by multiplying the quantity by the contractor s proposed unit price to confirm the extended amount for each contract line item (clin). The price evaluation will document the reasonableness and affordability of the proposed total evaluated price (tep).
2. Past performance.
The government will evaluate the quality and extent of quoter s performance deemed recent and relevant to the requirements of this request for quote (rfq). The evaluation of past performance information will take into account past performance information regarding predecessor companies, key personnel who have relevant experience, or subcontractors that will perform major or critical aspects of the requirement when such information is relevant to the acquisition.
1) all past performance will be assessed on recency. Recent past performance is defined as past performance on contracts within the last three (3) years from the closing date of this solicitation. Past performance not considered recent will not be evaluated.
2) quoters will be evaluated on relevancy. Using questionnaires and information submitted under addenda to far 52.212-1, quote preparation instruction, part ii, past performance, the contracting officer (co) shall seek relevant performance information on all quoters based on (1) the present/past references provided by the quoter and (2) data independently obtained from other government and commercial sources as well as past performance questionnaires. Relevant performance is determined as manufacturing of footlockers involving similar or greater scope, magnitude and complexity than the effort described in this solicitation. Somewhat relevant performance is determined as manufacturing of luggage (suit cases, garment bags, b-4 bags). No relevant performance will not be evaluated.
Past performance relevancy ratings
rating definition
relevant present/past performance effort involved similar scope and magnitude of effort and complexities this solicitation requires.
Somewhat relevant present/past performance effort involved some of the scope and magnitude of effort and complexities this solicitation requires.
Not relevant present/past performance effort involved little or none of the scope and magnitude of effort and complexities this solicitation requires.
3) a quality rating will be given for each past performance reference identified by the government. Quality ratings are based on the following definitions:
e vg s m u n/a
exceptional very good satisfactory marginal unsatisfactory not applicable
the contractor met and exceeded many of the requirements of the contract and consistently performed at a superior level. Performance was accomplished with very few minor problems, and the contractor took immediate and effective corrective actions for those problems that did occur.
The contractor met and exceeded some of the requirements of the contract and consistently performed very well. Performance was accomplished with some minor problems, and the contractor took timely and effective corrective action for those problems that did occur the contractor met the requirements of the contract and consistently performed at an acceptable level. Performance was accomplished with some problems, and the contractor took effective corrective action for those problems that did occur the contractor did not always meet some of the requirements of the contract and intervention was required to continue performance. There were instances where performance was at a less than acceptable level; performance was accomplished with some problems and some corrective actions appear only marginally effective or were not fully implemented the contractor did not meet the requirements of the contract and performance was at an unacceptable level. There were a number of serious problems that required extensive oversight and involvement, and corrective actions were either ineffective or non-existent.
Unable to provide a rating. Contract did not include performance for this aspect, or information is not available. Do not know.
4) the purpose of the past performance evaluation is to assess the degree of confidence the government has in the vendor s ability to provide services that meet the requirements outlined in this solicitation using the vendor s demonstrated record of performance. Recency, relevancy and quality ratings for the evaluated past performance citations will be integrated to determine an overall confidence assessment rating. This process will result in an overall performance confidence assessment rating of substantial confidence, satisfactory confidence, limited confidence, no confidence, or unknown confidence as defined in the dod source selection procedures, table 5, performance confidence assessments. Past performance regarding predecessor companies, key personnel who have relevant experience, or sub-contractors that will perform major or critical aspects of the requirement will be considered as highly as past performance information for the principal quoter. Quoters with no relevant past or present performance history or the vendor s performance record is so limited that no confidence assessment rating can be reasonably assigned shall receive the rating "unknown confidence", meaning the rating is treated neither favorably nor unfavorably (neutral).
Performance confidence assessments
rating description
substantial
confidence based on the quoter s recent/relevant performance record, the government has a high expectation that the quoter will successfully perform the required effort.
Satisfactory
confidence based on the quoter s recent/relevant performance record, the government has a reasonable expectation that the vendor will successfully perform the required effort
limited confidence based on the vendor s recent/relevant performance record, the government has a low expectation that the vendor will successfully perform the required effort.
No confidence based on the vendor s recent/relevant performance record, the government has no expectation that the vendor will be able to successfully perform the required effort
unknown confidence
(neutral) no recent/relevant performance record is available or the vendor s performance record is so sparse that no meaningful confidence assessment rating can be reasonably assigned.
5) vendors are cautioned to submit sufficient information and in the format specified in the quote preparation instructions to permit a meaningful assessment of past performance. Quoters may be asked to clarify certain aspects of their quote or respond to adverse past performance information to which the quoter has not previously had an opportunity to respond. Adverse past performance is defined as past performance information that supports a less than satisfactory rating on any evaluation element or any unfavorable comments received from sources with a formal rating system. Communication conducted to resolve minor or clerical errors will not constitute discussions and the co reserves the right to award a contract without the opportunity for quote revision.
6) if the lowest priced evaluated offer is judged to have a "substantial confidence" performance rating, that quote represents the best value for the government and the evaluation process stops at this point. Award shall be made to that quoter without further consideration of any other quoters.
7) in the event that the government does not make an award pursuant to paragraph 6 above, the government reserves the right to award a contract to other than the lowest priced offer if that offeror is judged to have a performance assessment rating of "substantial confidence" or lower. In that event, the source selection authority shall make an integrated assessment best value award decision.
Far 52.212-4, contract terms and conditions-commercial items (may 2015) applies to this acquisition and the following addenda, applies:
addendum to far 52.212-4(c) changes
text in paragraph (c) is deleted and replaced with the following:
changes in terms and conditions of this contract may be made only by written agreement of the parties with the exception of certain changes such as administrative changes including changes in paying office, appropriation data, etc. Authorized by the federal acquisition regulation and its supplements that may be made unilaterally by the contracting officer (for a complete list of changes that may be made unilaterally, see far 43.103(b)).
(end of addendum)
52.212-5 contract terms and conditions required to implement statutes or executive orders-commercial items (deviation 2013-o0019) (jan 2016)
(a) comptroller general examination of record. The contractor shall comply with the provisions of this paragraph (a) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, audit and records -- negotiation.
(1) the comptroller general of the united states, or an authorized representative of the comptroller general, shall have access to and right to examine any of the contractor s directly pertinent records involving transactions related to this contract.
(2) the contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in far subpart 4.7, contractor records retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.
(3) as used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the contractor to create or maintain any record that the contractor does not maintain in the ordinary course of business or pursuant to a provision of law.
(b)
(1) notwithstanding the requirements of any other clause in this contract, the contractor is not required to flow down any far clause, other than those in this paragraph (b)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-
(i) 52.203-13, contractor code of business ethics and conduct (apr 2010) (41 u.s.c. 3509).
(ii) 52.219-8, utilization of small business concerns (oct 2014) (15 u.s.c. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650, 000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.
(iii) 52.222-17, nondisplacement of qualified workers (may 2014) (e.o. 13495). Flow down required in accordance with paragraph (1) of far clause 52.222-17.
(iv) 52.222-21, prohibition of segregated facilities (apr 2015).
(v) 52.222-26, equal opportunity (mar 2007) (e.o. 11246).
(vi) 52.222-35, equal opportunity for veterans (jul 2014) (38 u.s.c. 4212).
(vii) 52.222-36, equal opportunity for workers with disabilities (jul 2014) (29 u.s.c. 793).
(viii) 52.222-37, employment reports on veterans (jul 2014) (38 u.s.c. 4212).
(ix) 52.222-40, notification of employee rights under the national labor relations act (dec 2010) (e.o. 13496). Flow down required in accordance with paragraph (f) of far clause 52.222-40.
(x) 52.222-41, service contract labor standards (may 2014), (41 u.s.c. Chapter 67).
(xi)
___ (a) 52.222-50, combating trafficking in persons (mar 2015) (22 u.s.c. Chapter 78 and e.o. 13627).
___ (b) alternate i (mar 2015) of 52.222-50 (22 u.s.c. Chapter 78 e.o. 13627).
(xii) 52.222-51, exemption from application of the service contract labor standards to contracts for maintenance, calibration, or repair of certain equipment--requirements (may 2014) (41 u.s.c. Chapter 67.)
(xiii) 52.222-53, exemption from application of the service contract labor standards to contracts for certain services--requirements (may 2014) (41 u.s.c. Chapter 67)
(xiv) 52.222-54, employment eligibility verification (aug 2013).
(xv) 52.222-55, minimum wages under executive order 13658 (dec 2014) (e.o. 13658).
(xvi) 52.225-26, contractors performing private security functions outside the united states (jul 2013) (section 862, as amended, of the national defense authorization act for fiscal year 2008; 10 u.s.c. 2302 note).
(xvii) 52.226-6, promoting excess food donation to nonprofit organizations. (may 2014) (42 u.s.c. 1792). Flow down required in accordance with paragraph (e) of far clause 52.226-6.
(xviii) 52.247-64, preference for privately-owned u.s. Flag commercial vessels (feb 2006) (46 u.s.c. Appx 1241(b) and 10 u.s.c. 2631). Flow down required in accordance with paragraph (d) of far clause 52.247-64.
(2) while not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.
(end of clause)
additional far clauses cited in the clause applicable to this acquisition are:
52.204-10 reporting executive compensation and first-tier subcontract awards
(jul 2013)
52.209-6 protecting the governments interests when subcontracting with contractors debarred, suspended, or proposed for debarment (aug 2013)
52.209-10 prohibition on contracting with inverted domestic corporations (dec 2014)
52.219-6 notice of total small business set-aside (nov 2011)
52.219-28 post-award small business program representation (jul 2013)
52.222-3 convict labor (june 2003)
52.222-19 child labor -- cooperation with authorities and remedies (jan 2014)
52.222-21 prohibition of segregated facilities (apr 2015)
52.222-26 equal opportunity (apr 2015)
52.222-35 equal opportunity for special disabled veterans, veterans of the vietnam
era, and other eligible veterans (oct 2015)
52.222-36 equal opportunity for workers w/disabilities (july 2014)
52.222-37 employment reports on special disabled veterans, veterans of the vietnam
era, and other eligible veterans (oct 2015)
52.222-50 combat trafficking in persons (mar 2015)
52.223-18 encouraging contractor policies to ban text messaging while driving
(aug 2011)
52.225-13 restrictions on certain foreign purchases (jun 2008)
52.232-33 payment by electronic funds transfer--central contractor registration
(jul 2013)
52.232-40 providing accelerated payments to small business contractors (dec 2013)
52.233-3 protest after award (aug 1996)
52.233-4 applicable law for breach of contract claim (oct 2004)
the provision at far 52.252-2, clauses incorporated by reference applies to this acquisition:
52.252-2 clauses incorporated by reference (feb 1998)
this contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the contracting officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address:
http://farsite.hill.af.mil.
(end of clause)
additional dfars clauses cited in the clause applicable to this acquisition are:
252.203-7000 requirements relating to compensation of former dod officials (sep 2011)
252.204-7009 limition of the use or disclosure of thired-party contractor information (aug
15)
252.204-7012 safeguarding covered defense information and cyber incident reporting (dec
2015)
252.204-7015 disclosure of information to ligitation support contractors (feb 2014)
252.225-7001 buy american and balance of payments program - basic (nov 2014)
252.225-7002 qualifying country sources as subcontractors (dec 2012)
252.232-7003 electronic submission of payment requests and receiving (jun 2012)
252.232-7010 levies on contract payments (dec 2006)
252.244-7000 subcontracts for commercial items (jun 2013)
252.247-7024 notification of transportation of supplies by sea (mar 2000)
dfars clauses in full text
252.211-7003 item unique identification and valuation (dec 2013)
(a) definitions. As used in this clause-
"automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.
"concatenated unique item identifier" means-
(1) for items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or
(2) for items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.
"data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the error checking and correction 200 (ecc200) specification found within international standards organization (iso)/international electrotechnical commission (iec) 16022.
"data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.
"dod recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by dod. All dod recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.
"dod item unique identification" means a system of marking items delivered to dod with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.
"enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.
"enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.
"government s unit acquisition cost" means-
(1) for fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;
(2) for cost-type or undefinitized line, subline, or exhibit line items, the contractor s estimated fully burdened unit cost to the government at the time of delivery; and
(3) for items produced under a time-and-materials contract, the contractor s estimated fully burdened unit cost to the government at the time of delivery.
"issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise (i.e., dun & bradstreet s data universal numbering system (duns) number, gs1 company prefix, allied committee 135 nato commercial and government entity (ncage)/ commercial and government entity (cage) code, or the coded representation of the north american telecommunications industry manufacturers, suppliers, and related service companies (atis-0322000) number), european health industry business communication council (ehibcc) and health industry business communication council (hibcc)), as indicated in the register of issuing agency codes for iso/iec 15459, located at http://www.nen.nl/normontwikkeling/certificatieschemas-en-keurmerken/schemabeheer/isoiec-15459.htm under "register."
"issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.
"item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.
"lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.
"machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.
"original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.
"parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or dod recognized unique identification equivalent.
"serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.
"serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.
"serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.
"serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.
"type designation" means a combination of letters and numerals assigned by the government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.
"unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a dod recognized unique identification equivalent.
"unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.
(b) the contractor shall deliver all items under a contract line, subline, or exhibit line item.
(c) unique item identifier.
(1) the contractor shall provide a unique item identifier for the following:
(i) delivered items for which the government s unit acquisition cost is $5, 000 or more, except for the following line items:
contract line, subline, or exhibit line item number item description
clin 0001
(ii) items for which the government s unit acquisition cost is less than $5, 000 that are identified in the schedule or the following table:
contract line, subline, or exhibit line item number item description
"see schedule"
(iii) subassemblies, components, and parts embedded within delivered items, items with warranty requirements, dod serially managed reparables and dod serially managed nonreparables as specified in attachment number ____.
(iv) any item of special tooling or special test equipment as defined in far 2.101 that have been designated for preservation and storage for a major defense acquisition program as specified in attachment number ____.
(v) any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.
(2) the unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the dod item unique identification registry by the contractor.
(3) the unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with iso/iec international standard 16022, information technology - international symbology specification - data matrix; ecc200 data matrix specification.
(4) data syntax and semantics of unique item identifiers. The contractor shall ensure that-
(i) the data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the contractor:
(a) application identifiers (ais) (format indicator 05 of iso/iec international standard 15434), in accordance with iso/iec international standard 15418, information technology - ean/ucc application identifiers and fact data identifiers and maintenance and ansi mh 10.8.2 data identifier and application identifier standard.
(b) data identifiers (dis) (format indicator 06 of iso/iec international standard 15434), in accordance with iso/iec international standard 15418, information technology - ean/ucc application identifiers and fact data identifiers and maintenance and ansi mh 10.8.2 data identifier and application identifier standard.
(c) text element identifiers (teis) (format indicator 12 of iso/iec international standard 15434), in accordance with the air transport association common support data dictionary; and
(ii) the encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for format indicators 05, 06, and 12 in iso/iec international standard 15434, information technology - transfer syntax for high capacity automatic data capture media.
(5) unique item identifier.
(i) the contractor shall-
(a) determine whether to-
(1) serialize within the enterprise identifier;
(2) serialize within the part, lot, or batch number; or
(3) use a dod recognized unique identification equivalent (e.g. Vehicle identification number); and
(b) place the data elements of the unique item identifier (enterprise identifier; serial number; dod recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in mil-std-130, identification marking of u.s. Military property, latest version;
(c) label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of mil-std-129, military marking for shipment and storage, latest version; and
(d) verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of appendix a, mil-std-130, latest version.
(ii) the issuing agency code-
(a) shall not be placed on the item; and
(b) shall be derived from the data qualifier for the enterprise identifier.
(d) for each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the material inspection and receiving report specified elsewhere in this contract, the contractor shall report at the time of delivery, as part of the material inspection and receiving report, the following information:
(1) unique item identifier.
(2) unique item identifier type.
(3) issuing agency code (if concatenated unique item identifier is used).
(4) enterprise identifier (if concatenated unique item identifier is used).
(5) original part number (if there is serialization within the original part number).
(6) lot or batch number (if there is serialization within the lot or batch number).
(7) current part number (optional and only if not the same as the original part number).
(8) current part number effective date (optional and only if current part number is used).
(9) serial number (if concatenated unique item identifier is used).
(10) government s unit acquisition cost.
(11) unit of measure.
(12) type designation of the item as specified in the contract schedule, if any.
(13) whether the item is an item of special tooling or special test equipment.
(14) whether the item is covered by a warranty.
(e) for embedded subassemblies, components, and parts that require dod item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the contractor shall report as part of the material inspection and receiving report specified elsewhere in this contract, the following information:
(1) unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.
(2) unique item identifier of the embedded subassembly, component, or part.
(3) unique item identifier type.**
(4) issuing agency code (if concatenated unique item identifier is used).**
(5) enterprise identifier (if concatenated unique item identifier is used).**
(6) original part number (if there is serialization within the original part number).**
(7) lot or batch number (if there is serialization within the lot or batch number).**
(8) current part number (optional and only if not the same as the original part number).**
(9) current part number effective date (optional and only if current part number is used).**
(10) serial number (if concatenated unique item identifier is used).**
(11) description.
** once per item.
(f) the contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:
(1) end items shall be reported using the receiving report capability in wide area workflow (wawf) in accordance with the clause at 252.232-7003. If wawf is not required by this contract, and the contractor is not using wawf, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.
(2) embedded items shall be reported by one of the following methods-
(i) use of the embedded items capability in wawf;
(ii) direct data submission to the iuid registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or
(iii) via wawf as a deliverable attachment for exhibit line item number (fill in) ___, unique item identifier report for embedded items, contract data requirements list, dd form 1423.
(g) subcontracts. If the contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.
(end of clause)
252.232-7006 wide area workflow payment instructions (may 2013)
(a) definitions. As used in this clause-
"department of defense activity address code (dodaac)" is a six position code that uniquely identifies a unit, activity, or organization.
"document type" means the type of payment request or receiving report available for creation in wide area workflow (wawf).
"local processing office (lpo)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
(b) electronic invoicing. The wawf system is the method to electronically process vendor payment requests and receiving reports, as authorized by dfars 252.232-7003, electronic submission of payment requests and receiving reports.
(c) wawf access. To access wawf, the contractor shall-
(1) have a designated electronic business point of contact in the system for award management at https://www.acquisition.gov; and
(2) be registered to use wawf at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) wawf training. The contractor should follow the training instructions of the wawf web-based training course and use the practice training site before submitting payment requests through wawf. Both can be accessed by selecting the "web based training" link on the wawf home page at https://wawf.eb.mil/
(e) wawf methods of document submission. Document submissions may be via web entry, electronic data interchange, or file transfer protocol.
(f) wawf payment instructions. The contractor must use the following information when submitting payment requests and receiving reports in wawf for this contract/order:
(1) document type. The contractor shall use the following document type(s).
Combo.
(2) inspection/acceptance location. The contractor shall select the following inspection/acceptance location(s) in wawf, as specified by the contracting officer.
Destination
(3) document routing. The contractor shall use the information in the routing data table below only to fill in applicable fields in wawf when creating payment requests and receiving reports in the system.
Routing data table*
field name in wawf data to be entered in wawf
pay official dodaac f67100
issue by dodaac fa7000
admin dodaac fa7000
inspect by dodaac fx7000
ship to code fx7000
(4) payment request and supporting documentation. The contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in dfars appendix f, (e.g. Timesheets) in support of each payment request.
(5) wawf email notifications. The contractor shall enter the e-mail address identified below in the "send additional email notifications" field of wawf once a document is submitted in the system.
[email protected] (contracting officer)
[email protected] (contract specialist)
(g) wawf point of contact.
(1) the contractor may obtain clarification regarding invoicing in wawf from the following contracting activity s wawf point of contact.
[email protected] (contracting officer)
[email protected] (contract specialist)
(2) for technical wawf help, contact the wawf helpdesk at 866-618-5988.
252.247-7023 transportation of supplies by sea. (apr 2014)
(a) definitions. As used in this clause-
"components" means articles, materials, and supplies incorporated directly into end products at any level of manufacture, fabrication, or assembly by the contractor or any subcontractor.
"department of defense" (dod) means the army, navy, air force, marine corps, and defense agencies.
"foreign-flag vessel" means any vessel that is not a u.s.-flag vessel.
"ocean transportation" means any transportation aboard a ship, vessel, boat, barge, or ferry through international waters.
"subcontractor" means a supplier, materialman, distributor, or vendor at any level below the prime contractor whose contractual obligation to perform results from, or is conditioned upon, award of the prime contract and who is performing any part of the work or other requirement of the prime contract.
"supplies" means all property, except land and interests in land, that is clearly identifiable for eventual use by or owned by the dod at the time of transportation by sea.
(i) an item is clearly identifiable for eventual use by the dod if, for example, the contract documentation contains a reference to a dod contract number or a military destination.
(ii) "supplies" includes (but is not limited to) public works; buildings and facilities; ships; floating equipment and vessels of every character, type, and description, with parts, subassemblies, accessories, and equipment; machine tools; material; equipment; stores of all kinds; end items; construction materials; and components of the foregoing.
"u.s.-flag vessel" means a vessel of the united states or belonging to the united states, including any vessel registered or having national status under the laws of the united states.
(b)(1) the contractor shall use u.s.-flag vessels when transporting any supplies by sea under this contract.
(2) a subcontractor transporting supplies by sea under this contract shall use u.s.-flag vessels if-
(i) this contract is a construction contract; or
(ii) the supplies being transported are-
(a) noncommercial items; or
(b) commercial items that-
(1) the contractor is reselling or distributing to the government without adding value (generally, the contractor does not add value to items that it subcontracts for f.o.b. Destination shipment);
(2) are shipped in direct support of u.s. Military contingency operations, exercises, or forces deployed in humanitarian or peacekeeping operations; or
(3) are commissary or exchange cargoes transported outside of the defense transportation system in accordance with 10 u.s.c. 2643.
(c) the contractor and its subcontractors may request that the contracting officer authorize shipment in foreign-flag vessels, or designate available u.s.-flag vessels, if the contractor or a subcontractor believes that-
(1) u.s.-flag vessels are not available for timely shipment;
(2) the freight charges are inordinately excessive or unreasonable; or
(3) freight charges are higher than charges to private persons for transportation of like goods.
(d) the contractor must submit any request for use of foreign-flag vessels in writing to the contracting officer at least 45 days prior to the sailing date necessary to meet its delivery schedules. The contracting officer will process requests submitted after such date(s) as expeditiously as possible, but the contracting officer s failure to grant approvals to meet the shipper s sailing date will not of itself constitute a compensable delay under this or any other clause of this contract. Requests shall contain at a minimum-
(1) type, weight, and cube of cargo;
(2) required shipping date;
(3) special handling and discharge requirements;
(4) loading and discharge points;
(5) name of shipper and consignee;
(6) prime contract number; and
(7) a documented description of efforts made to secure u.s.-flag vessels, including points of contact (with names and telephone numbers) with at least two u.s.-flag carriers contacted. Copies of telephone notes, telegraphic and facsimile message or letters will be sufficient for this purpose.
(e) the contractor shall, within 30 days after each shipment covered by this clause, provide the contracting officer and the maritime administration, office of cargo preference, u.s. Department of transportation, 400 seventh street sw, washington, dc 20590, one copy of the rated on board vessel operating carrier s ocean bill of lading, which shall contain the following information:
(1) prime contract number;
(2) name of vessel;
(3) vessel flag of registry;
(4) date of loading;
(5) port of loading;
(6) port of final discharge;
(7) description of commodity;
(8) gross weight in pounds and cubic feet if available;
(9) total ocean freight in u.s. Dollars; and
(10) name of steamship company.
(f) if this contract exceeds the simplified acquisition threshold, the contractor shall provide with its final invoice under this contract a representation that to the best of its knowledge and belief-
(1) no ocean transportation was used in the performance of this contract;
(2) ocean transportation was used and only u.s.-flag vessels were used for all ocean shipments under the contract;
(3) ocean transportation was used, and the contractor had the written consent of the contracting officer for all foreign-flag ocean transportation; or
(4) ocean transportation was used and some or all of the shipments were made on foreign-flag vessels without the written consent of the contracting officer. The contractor shall describe these shipments in the following format:
item description contract line items quantity
total
(g) if this contract exceeds the simplified acquisition threshold and the final invoice does not include the required representation, the government will reject and return it to the contractor as an improper invoice for the purposes of the prompt payment clause of this contract. In the event there has been unauthorized use of foreign-flag vessels in the performance of this contract, the contracting officer is entitled to equitably adjust the contract, based on the unauthorized use.
(h) in the award of subcontracts, for the types of supplies described in paragraph (b)(2) of this clause, including subcontracts for commercial items, the contractor shall flow down the requirements of this clause as follows:
(1) the contractor shall insert the substance of this clause, including this paragraph (h), in subcontracts that exceed the simplified acquisition threshold in part 2 of the federal acquisition regulation.
(2) the contractor shall insert the substance of paragraphs (a) through (e) of this clause, and this paragraph (h), in subcontracts that are at or below the simplified acquisition threshold in part 2 of the federal acquisition regulation.
(end of clause)
affars clause in full text:
5352.201-9101 ombudsman (apr 2014)
(a) an ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.
(b) before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, gao bid protests, requests for debriefings, employee-employer actions, contests of omb circular a-76 competition performance decisions).
(c) if resolution cannot be made by the contracting officer, the interested party may contact the center/majcom/dru or afisra ombudsmen,
kelly s. Snyder
8110 industrial drive, ste 103
usafa, co 80840
telephone number 719-333-2074
fax 719-333-9018
email:
[email protected]concerns, issues, disagreements, and recommendations that cannot be resolved at the center/majcom/dru or afisra level, may be brought by the interested party for further consideration to the air force ombudsman, associate deputy assistant secretary (adas) (contracting), saf/aqc, 1060 air force pentagon, washington dc 20330-1060, phone number (571) 256-2397, facsimile number (571) 256-2431.
(d) the ombudsman has no authority to render a decision that binds the agency.
(e) do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.
(end of clause)
provisions:
52.212-3 offeror representations and certifications--commercial items (nov 2015) alternate i (may 2014)
the offeror shall complete only paragraphs (b) of this provision if the offeror has completed the annual representations and certification electronically via the system for award management (sam) web site accessed through http://www.acquisition.gov . If the offeror has not completed the annual representations and certifications electronically, the offeror shall complete only paragraphs (c) through (p) of this provision.
(a) definitions. As used in this provision--
"economically disadvantaged women-owned small business (edwosb) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the united states and who are economically disadvantaged in accordance with 13 cfr part 127. It automatically qualifies as a women-owned small business eligible under the wosb program.
"forced or indentured child labor" means all work or service-
(1) exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or
(2) performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.
"highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.
"immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.
"inverted domestic corporation, " as used in this section, means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 u.s.c. 395(b), i.e., a corporation that used to be incorporated in the united states, or used to be a partnership in the united states, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 u.s.c. 395(b), applied in accordance with the rules and definitions of 6 u.s.c. 395(c). An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the internal revenue code at 26 u.s.c. 7874.
"manufactured end product" means any end product in federal supply classes (fsc) 1000-9999, except-
(1) fsc 5510, lumber and related basic wood materials;
(2) federal supply group (fsg) 87, agricultural supplies;
(3) fsg 88, live animals;
(4) fsg 89, food and related consumables;
(5) fsc 9410, crude grades of plant materials;
(6) fsc 9430, miscellaneous crude animal products, inedible;
(7) fsc 9440, miscellaneous crude agricultural and forestry products;
(8) fsc 9610, ores;
(9) fsc 9620, minerals, natural and synthetic; and
(10) fsc 9630, additive metal materials.
"place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.
"restricted business operations" means business operations in sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the sudan accountability and divestment act of 2007 (pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in section 2 of the sudan accountability and divestment act of 2007) conducting the business can demonstrate-
(1) are conducted under contract directly and exclusively with the regional government of southern sudan;
(2) are conducted pursuant to specific authorization from the office of foreign assets control in the department of the treasury, or are expressly exempted under federal law from the requirement to be conducted under such authorization;
(3) consist of providing goods or services to marginalized populations of sudan;
(4) consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;
(5) consist of providing goods or services that are used only to promote health or education; or
(6) have been voluntarily suspended.
Sensitive technology-
(1) means hardware, software, telecommunications equipment, or any other technology that is to be used specifically-
(i) to restrict the free flow of unbiased information in iran; or
(ii) to disrupt, monitor, or otherwise restrict speech of the people of iran; and
(2) does not include information or informational materials the export of which the president does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the international emergency economic powers act (50 u.s.c. 1702(b)(3)).
"service-disabled veteran-owned small business concern"-
(1) means a small business concern-
(i) not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and
(ii) the management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.
(2) service-disabled veteran means a veteran, as defined in 38 u.s.c. 101(2), with a disability that is service-connected, as defined in 38 u.s.c. 101(16).
"small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on government contracts, and qualified as a small business under the criteria in 13 cfr part 121 and size standards in this solicitation.
"small disadvantaged business concern, consistent with 13 cfr 124.1002, " means a small business concern under the size standard applicable to the acquisition, that--
(1) is at least 51 percent unconditionally and directly owned (as defined at 13 cfr 124.105) by--
(i) one or more socially disadvantaged (as defined at 13 cfr 124.103) and economically disadvantaged (as defined at 13 cfr 124.104) individuals who are citizens of the united states; and
(ii) each individual claiming economic disadvantage has a net worth not exceeding $750, 000 after taking into account the applicable exclusions set forth at 13 cfr 124.104(c)(2); and
(2) the management and daily business operations of which are controlled (as defined at 13.cfr 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.
"subsidiary" means an entity in which more than 50 percent of the entity is owned-
(1) directly by a parent corporation; or
(2) through another subsidiary of a parent corporation.
"veteran-owned small business concern" means a small business concern-
(1) not less than 51 percent of which is owned by one or more veterans(as defined at 38 u.s.c. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and
(2) the management and daily business operations of which are controlled by one or more veterans.
"women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.
"women-owned small business concern" means a small business concern --
(1) that is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and
(2) whose management and daily business operations are controlled by one or more women.
"women-owned small business (wosb) concern eligible under the wosb program (in accordance with 13 cfr part 127), " means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the united states.
(b)
(1) annual representations and certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the sam website.
(2) the offeror has completed the annual representations and certifications electronically via the sam website accessed through https://www.acquisition.gov. After reviewing the sam database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at far 52.212-3, offeror representations and certifications-commercial items, have been entered or updated in the last 12 months, are current, accurate, complete, and