Login
Login
Register
Complete Your Profile
Change Password
Request a Password Reset
Download Documents
JOSÉ CELESTINO MUTIS BOTANICAL GARDEN has floated a tender for Acquisition and Installation of Furniture for the Children's Laboratory. The project location is Colombia and the tender is closing on 12 Dec 2019. The tender notice number is JBB-SA-SI-021-2019, while the TOT Ref Number is 38522759. Bidders can have further information about the Tender and can request the complete Tender document by Registering on the site.
Procurement Summary
Country : Colombia
Summary : Acquisition and Installation of Furniture for the Children's Laboratory
Deadline : 12 Dec 2019
Other Information
Notice Type : Tender
TOT Ref.No.: 38522759
Document Ref. No. : JBB-SA-SI-021-2019
Competition : ICB
Financier : Self Financed
Purchaser Ownership : -
Tender Value : Refer Document
Purchaser's Detail
Purchaser : JOSÉ CELESTINO MUTIS BOTANICAL GARDEN
Avenida Calle 63 # 68 -95 Bogotá Capital District of Bogotá
Colombia
Tender Details
Expression of Interest for Acquisition and Installation of Furniture for the Children's Laboratory Located in the José Celestino Mutis Botanical Garden.
Description:
Top cabinet dimensions: 2.59 x 0.35 x 0.60 mt (Width. Depth. Height). Built in tablex RH thermofugado of high resistance to humidity and plating in acrylic melamine resistant to reagents in all its parts, each piece must be thermoplated and thermo sealed by all its edges through the use of rigid edge RAUKANTEX laser edge, protecting the board of moisture attacks. The furniture internally has guides of total extraction, 4 internal shelves adjustable in height. The furniture has sliding doors in acrylic.Furniture certified before SEFA (International Association of Scientific Equipment and Furniture) 1.00 A
Top cabinet dimensions: 2.00 x 0.35 x 0.60 mt (Width. Depth. Height). Built in tablex RH thermofugado of high resistance to humidity and plating in acrylic melamine resistant to reagents in all its parts, each piece must be thermoplated and thermo sealed by all its edges through the use of rigid edge RAUKANTEX laser edge, protecting the board of moisture attacks. The furniture internally has guides of total extraction, 4 internal shelves adjustable in height. The furniture has sliding doors in acrylic.Furniture certified to SEFA (International Association of Scientific Equipment and Furniture). 1.00 A
Mobile Inn of Dimensions: 0.86 x 0.60 x 0.90 mt (Width. Depth. Height). Conformed by: Structure (Set of properly assembled parts that make up structure: Side for furniture made of cold Rolled steel with welding using more than 98% of Co2 16 gauge, paral manufactured at 90 ° angle in 14 gauge cold Rolled steel with dies and Welding, using more than 98% of Co2, 0.18m foot roller made of cold Rolled 14 gauge steel. Structure painted with electrostatic epoxy paint. (color chosen by the customer) Wheels (made of nitrile rubber conferring resistance to Oil, fuel and other chemicals, nitrile wheels are less prone to damage (due to needles, or imperfections in the floor for example), tested by ISO 9001: 2008. Solid surface with imperceptible joints certified under ISO 9001: 2000, ISO 9001: 2008 and ISO 9100C: 2009-01. Furniture certified before SEFA (International Association of Scientific Equipment and Furniture) 7.00 A
Mobile Inn of Dimensions: 0.86 x 0.60 x 0.90 cm (Width. Depth. Height). Conformed by: Structure (Set of properly assembled parts that make up structure: Side for furniture made of cold Rolled steel with welding using more than 98% of Co2 16 gauge, paraly manufactured at a 90 ° angle in 14 gauge cold Rolled steel with dies and Welding, using more than 98% of Co2, 0.18m foot roller made of cold Rolled 14 gauge steel. Structure painted with electrostatic epoxy paint. (color chosen by the customer) Wheels (made of nitrile rubber conferring resistance to Oil, fuel and other chemicals, nitrile wheels are less prone to damage (due to needles, or imperfections in the floor, for example), tested by ISO 9001: 2008. Solid surface TECHNICAL CERAMICS. 1.00 A
Fixed Dimension Inn: 1.55 x 0.60 x 0.90 cm (Width. Depth. Height). Conformed by: Structure (Set of properly assembled parts that make up the structure: Side for furniture made of cold Rolled steel with welding, using more than 98% of Co2 16 gauge, paral manufactured in 90 ° angle in 14 gauge cold Rolled steel with dies and welding, using more than 98% of Co2, 0.18m foot roller made of cold Rolled 14 gauge steel. Structure painted with electrostatically epoxy paint (color chosen by the customer). Solid surface with imperceptible joints certified under ISO 9001: 2000, ISO 9001: 2008 and ISO 9100C: 2009-01. Furniture certified before SEFA (International Association of Scientific Equipment and Furniture) 1.00 A
low built in tablex RH thermofugado of high resistance to humidity and plating in acrylic melamine resistant to reagents in all its parts, each piece must be thermoplated and thermo sealed by all its edges through the use of rigid edge laser edge, protecting the board of moisture attacks. Handles and hinges in stainless steel to prevent the doors from falling, The furniture internally has guides of total extraction, 4 internal shelves adjustable in height. The furniture has Legs (General structure made of Zinc + Iron + PA alloy to give greater impact resistance), Nitrile leg levelers, high impact resistant and with millimeter graduation, approved for use in environments clinical and / or research, 1.00 A
Total estimated price: 49, 658, 101 COP
Documents
Want To Bid in This Tender?
Get Local Agent Support in Colombia and 60 More Countries.
View Tenders By
Sign in with Google