Expired Tender Netherlands ICB TOT Ref. 43538656

Acquisition and Delivery of LAN Equipment Tender - 43538656

Tender notice from Netherlands, published on 22 Jun 2020.

Executive Summary

The EUROCONTROL-EUROPEAN ORGANISATION FOR THE SAFETY OF AIR NAVIGATION has issued a Tender notice for the procurement of a Acquisition and Delivery of LAN Equipment in the Netherlands. This Tender notice was published on 22 Jun 2020 and is scheduled to close on 13 Jul 2020, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 43538656, while the tender notice number is 20-660235-A and Register on the platform.

Key facts

Summary
Acquisition and Delivery of LAN Equipment
TOT Ref. No.
43538656
Document Ref. No.
20-660235-A
Country
Netherlands
Notice type
Tender
Competition
ICB
Publication date
22 Jun 2020
Bid deadline
13 Jul 2020
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Other Funding Agencies

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Tenders are invited for Acquisition and Delivery of LAN Equipment for the Maastricht Upper Air Control Centre.
Call for Tenders No.: 20-660235-A
Title: Acquisition and delivery of LAN equipment for the Maastricht Upper Air Control Centre.
General: EUROCONTROL* is an intergovernmental organisation with 41 Member and
2 Comprehensive Agreement States. We are committed to building, together with our partners, a Single European Sky that will deliver the air traffic management (ATM) performance required for the twenty-first century and beyond.
Technical subject matter:
The objective of EUROCONTROL Maastricht is to build two independent yet securely interconnected network partitions, called OV (Ops Vital) and OVTDS (Ops Vital Test Development System), which provides operationally vital services related to air traffic control. As such, these networks will host business-critical services in support to the safety-critical workload of air traffic control.
Main selection, assessment and award criteria::
TECHNICAL CAPACITY CRITERIA PASS/FAIL
The Tenderer/Supplier SHALL be authorised by the Manufacturer(s) for the delivery of the requested hardware and related license deliverables.
The Tenderer/Supplier SHALL be a CISCO Gold certified partner.
The Tenderer/Supplier SHALL be a Checkpoint Stars Partner (3-stars or higher rating)
TECHNICAL ASSESSMENT CRITERIA PASS/FAIL All LOT 1 (see Table 2 below), LOT 2 (see Table 3 below) and LOT 3 (see Table 3 below) hardware SHALL be supplied in one shipment and no later than 8 weeks after Contract Signature.
The Supplier can tender for one, two or all LOTs.
For LOT 1, the Supplier SHALL deliver the exact hardware as in table 2 of the Technical Specifications document
For LOT 2, the Supplier SHALL deliver the exact hardware as in table 3 of the Technical Specifications document
For LOT 3, the Supplier SHALL deliver the exact hardware as in table 4 of the Technical Specifications document
No substitutions SHALL be supplied without The
Customer-s prior written consent.
The Supplier SHALL certify that:
1. the products are genuine OEM products,
2. the products are entitled to a full OEM warranty,
and
3. any related software is licensed originally to The Customer as the original licensee authorized to use the supplied software.
The Supplier SHALL deliver all procured equipment to EUROCONTROL Maastricht UAC - Horsterweg
11, NL-6199 AC Maastricht-Airport, The Netherlands -, referred to as “The Customer” throughout this document.
Direct shipment shall be used unless justified by the
Tenderer that direct shipment cannot be done. All hardware of the same part number SHALL be delivered with the same firmware/software level. Any delivered equipment SHALL arrive intact with related quality certificate. Any damaged box or equipment will be returned at the Supplier-s expenses for replacement.
The Supplier SHALL take the necessary actions to indicate to the Manufacturer(s) that the final destination of the Hardware deliverables is The Customer.
The Supplier SHALL include a one year (yearly renewable) maintenance support service (Cisco Smart Net Total Care) for all Cisco hardware and software.
The Supplier SHALL include a one year (yearly renewable) maintenance support service (Checkpoint Premium Support) for all Checkpoint hardware and software.
The Supplier shall include a longer term maintenance support service (Cisco Smart Net Total Care: e.g. 3 years, … ) for all Cisco hardware and software.
The Supplier shall include a longer term maintenance support service (Checkpoint Premium Support: e.g. 3 years, ...) for all Checkpoint hardware and software.
The Supplier shall be able to provide the same maintenance support service for equipment not part of this contract, but from the same manufacturers mentioned in this contract.
The Supplier SHALL deliver standard warranty for all products.
The Supplier SHALL warrant that the products are new, in their original packaging and provided directly from the manufacturer.
Tender closing date: 13-07-2020at 15:00 CET
Point of Contact: If you wish to receive the Call for Tenders please see the “Important Notice” below and if you have any other related questions, please contact:
C. SERVAES

SPM/FIN/PROC

E-mail: [email protected]

Tel. : +31-(0)43-366.1089

Or

S. LITAJ

SPM/FIN/PROC

E-mail : [email protected]

Tel. : +31-(0)43-366.2111

If this Call for Tenders should interest you, please read the important information below:
IMPORTANT NOTICE
The full i-Call for Tenders documentation is in electronic format (.pdf).
If you wish to obtain the i-Call for Tenders documentation please read and follow carefully the instructions below:
1. If you are already registered in the EUROCONTROL Supplier Portal, please send an e-mail to the Point of Contact mentioned above to get access to the documentation
2. If you are not yet registered as a EUROCONTROL supplier, please follow the 3-step process described on the following link: https://www.eurocontrol.int/portal/supplierportal
3. EUROCONTROL accepts no responsibility whatsoever for the completeness, accuracy and/or timeliness of the transmission of the electronic documents (nor for the electronic documents themselves).
4. Submission of tenders shall be made electronically and shall be exclusively made in strict accordance with the instructions given in the tendering documentation.
5. You may:
a) print out the documents;
b) forward the documents further on a strictly need to know basis (always fully acknowledging the source, i.e. EUROCONTROL), and
c) use print-outs of the electronic i-Call for Tenders documents for the submission of tenders (especially the Price Offer Form ref: I-TSF-E).
6. You may not:
a) modify, edit and/or change the electronic documents other than to submit the required info and to sign/stamp where required;
b) transmit such documents to any third person who has no need to know them;
c) post such documents on any private or public website;
d) alter the originating source (EUROCONTROL) and or copyright signs etc., and
e) transmit the documents without indication of the source.
An environmental notice:
With a view to reduce the exponential growth of paper consumption, we would invite you only to print out electronic documents received and/or request paper copies of the price enquiry documentation if you are actually considering to submit a tender.

Documents

Tender Notice
Login to view

Similar tenders

Tender Country TOT Ref. No. Bid deadline
Support Microsoft Cloud Services Netherlands 152660809 02 Feb 2027
Market Consultation Monitoring Detection & Response (Mdr) Netherlands 152643476 02 Jan 2027
European Tender for Ict Services Netherlands 152597940 04 Dec 2026
Rivm Market Survey Clinical Research Tooling Netherlands 152592754 01 Jan 2027
Tender for a Bilateral Nl-Uk Quantum Technology End-User Engagement Programme Netherlands 152547936 04 Jan 2027

Netherlands Public Procurement Intelligence

Frequently asked questions

The bid deadline for Acquisition and Delivery of LAN Equipment was 13 Jul 2020. Bidding is closed.

This tender has been issued by EUROCONTROL-EUROPEAN ORGANISATION FOR THE SAFETY OF AIR NAVIGATION in Netherlands.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is financed by Other Funding Agencies.

The tender is classified under the following CPV code(s): 32410000 - Local area network, 72710000 - Local area network services.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 43538656. The purchaser document reference is 20-660235-A.

See the Similar Tenders section on this page or browse other tenders from Netherlands.

This tender falls under Computer Hardware and Software Services in Netherlands. Suppliers in these sectors can track similar Netherlands tenders using CPV-based alerts.