Login
Register
Complete Your Profile
Change Password
Request a Password Reset
Download Documents
Download Documents
Get Help to Participate in This Tender
Change Password
For better security, update the account password.
The INDIAN NATIONAL CENTER FOR OCEAN INFORMATION SERVICES (INCOIS) has issued a Tender notice for the procurement of a SITC of 3 Nos of Air Cooled PAC Units, Precision Air Conditioner Radiator as per Drawing (BHEL), Qty: 1227 in the India.The project location is K.v.rangareddy, Telangana, India. This Tender notice was published on 29 Oct 2026 and is scheduled to close on 18 Nov 2026, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 151610351 and Register on the platform.
Purchaser contact is for registered users
Login to see detailsTender details are for registered users
Login to see details| # | Title | Description | Qty | Unit | Delivery (Days) |
|---|---|---|---|---|---|
| 1 | PAC unit 80 kW SITC with 5 yr warranty - net of buyback | File No. 58/2026. SITC of floor-mounted air-cooled downflow precision AC unit, net sensible capacity not less than 80.0 kW at return air 26 C DB / 35 pct RH, 43 C ambient, ESP 20 Pa after site and piping corrections (Clause 5.2), two refrigerant circuits, variable-capacity scroll compressors, EEV, EC fans, reheat, humidifier, controller, two matching air-cooled condensers, floor stand, NRV, return air damper, water leak sensor, team control, BMS card, SDCP interlock, earthing, minor civil and raised floor works, testing and commissioning, with five years comprehensive on-site warranty (Clause 9.4), including buyback of existing four 22 TR PAC units, condensers, piping and old chilled-water piping as one lot (Section 7, Annexure-VII). Rate net of buyback, break-up as per Annexure-VIII mandatory. As per Table-2 Item 1. | 3 | Nos | 133 |
| 2 | Refrigerant copper piping pair with insulation | File No. 58/2026. Refrigerant piping for one circuit, hot gas and liquid lines measured together as one pair, hard-drawn / annealed copper tubes of OEM sizes, 13 mm nitrile insulation, UV cladding outdoors, supports, oil traps, brazing under nitrogen, pressure test and evacuation, excluding cables and additional refrigerant, paid on actual measurement. As per Table-2 Item 2(a) and Section 6. | 500 | Rmt | 133 |
| 3 | IDU to condenser interconnecting control cables | File No. 58/2026. Interconnecting control / communication cables between each indoor unit and its two condensers (power cables excluded, existing power cables reused), copper conductor, armoured where run outdoors, OEM sizes, on GI tray or clamped, with glands, crimped lugs and labelling, paid on actual measurement. As per Table-2 Item 2(b) and Section 6. | 500 | Rmt | 133 |
| 4 | Additional refrigerant charge and oil for field piping | File No. 58/2026. Additional charge of R-410A (or OEM-approved refrigerant under Clause 5.11) and compressor oil for the field piping, over and above the first charge in Item 1, as calculated by the OEM for actual pipe length and recorded circuit by circuit, paid on actual quantity charged. As per Table-2 Item 2(c) and Section 6. | 120 | kg | 133 |
| 5 | 32 mm uPVC drain line with insulation | File No. 58/2026. Drain line of 32 mm uPVC pipe with 9 mm nitrile rubber insulation, fittings, trap and supports, laid to a fall of not less than 1 in 100 from each indoor unit to the drain point nominated by INCOIS, paid on actual measurement. As per Table-2 Item 2(d) and Section 6. | 50 | Rmt | 133 |
| 6 | 25 mm CPVC humidifier water line | File No. 58/2026. Humidifier water line of 25 mm CPVC pipe with fittings, supports, ball valve and strainer, from the water point nominated by INCOIS to each indoor unit, paid on actual measurement. As per Table-2 Item 2(e) and Section 6. | 50 | Rmt | 133 |
| 7 | Condenser MS stand for two condensers | File No. 58/2026. MS structural stand for the two condensers of one indoor unit, hot-dip galvanised or painted with primer and two coats of enamel, with anti-vibration pads and anchor fasteners. As per Table-2 Item 2(f) and Section 6. | 3 | Set | 133 |
| 8 | Any additional item for completion of work | File No. 58/2026. Any additional item needed for satisfactory completion of the work that is not listed in Items 1 to 7, to be quoted here with details in the price break-up. No extra payment will be made beyond the price of the bid items. As per Table-2 Item 2(g). | 1 | Lot | 133 |