|
1 |
BOOM HOIST CYL Part No MH100P1137F6 |
BOOM HOIST CYL (Part No MH100P1137F6) |
1 |
No |
60 |
|
2 |
BOOM HOIST CYL. SEAL Part No MH541100P38 |
BOOM HOIST CYL. SEAL (Part No MH541100P38) |
1 |
No |
60 |
|
3 |
PANEL ASSLY MAIN Part No MH9379J76F2 |
PANEL ASSLY MAIN (Part No MH9379J76F2) |
1 |
No |
60 |
|
4 |
PANEL ASSLY O R Part No MH9379N61F1 |
PANEL ASSLY O/R (Part No MH9379N61F1) |
1 |
No |
60 |
|
5 |
SWIVEL SEAL KIT Part No MH1100P419F3 |
SWIVEL SEAL KIT (Part No MH1100P419F3) |
1 |
No |
60 |
|
6 |
UPPER HARNESS Part No MH79R338 |
UPPER HARNESS (Part No MH79R338) |
1 |
No |
60 |
|
7 |
LOWER HARNESS Part No MH79R342 |
LOWER HARNESS (Part No MH79R342) |
1 |
No |
60 |
|
8 |
SWING MASTER CYL Part No MH38U57D2 |
SWING MASTER CYL (Part No MH38U57D2) |
1 |
No |
60 |
|
9 |
2-4 WHEEL SOL. ASSY Part No MH5436Z14 |
2-4 WHEEL SOL. ASSY (Part No MH5436Z14 ) |
1 |
No |
60 |
|
10 |
RELAY BRAKE ASSY Part No MH54938N5F1 |
RELAY BRAKE ASSY (Part No MH54938N5F1) |
1 |
No |
60 |
|
11 |
AIR DRYER Part No MH5446R1 |
AIR DRYER (Part No MH5446R1) |
1 |
No |
60 |
|
12 |
SOLENOID VALVE Part No MH5436Q10D2 |
SOLENOID VALVE (Part No MH5436Q10D2) |
1 |
No |
60 |
|
13 |
VERTICAL CYL. SEALKIT Part No MH541100P2 |
VERTICAL CYL. SEALKIT (Part No MH541100P2) |
4 |
Nos |
60 |
|
14 |
HORIZONTAL CYL. SEAL Part No MH541100P6 |
HORIZONTAL CYL. SEAL (Part No MH541100P6) |
4 |
Nos |
60 |
|
15 |
STEERING CYL. SEALKIT Part No MH541100P5 |
STEERING CYL. SEALKIT (Part No MH541100P5 ) |
4 |
Nos |
60 |
|
16 |
AXLE L O CYL. SEALKIT Part No MH541100P4 |
AXLE L/O CYL. SEALKIT (Part No MH541100P4 ) |
2 |
Nos |
60 |
|
17 |
BRACKET Part No MH16P5315D2 |
BRACKET (Part No MH16P5315D2) |
1 |
No |
60 |
|
18 |
LOCK VALVE Part No MH36Q234D1 |
LOCK VALVE (Part No MH36Q234D1 ) |
1 |
No |
60 |
|
19 |
Attending repairing works of VLRT30 Crane at Car Nicobar |
Attending comprehensive repair and rectification of defects on the VLRT 30 Crane. The work encompasses the supply of all listed spare parts, the rectification/replacing of the damaged parts and other related works within the purview of the supplied spares. The service provider is responsible for troubleshooting, replacing defective parts, and handing over all balance/unused spares to the SDO. The performance of the crane must be tested after all complete repairs, as directed by the Engineer-in-Charge (EIC) or their representative including all associated costs, GST, incidentals, service charges, and transportation/ freight of materails and service personels upto Crane Location. |
1 |
Job |
60 |