Login
Register
Complete Your Profile
Change Password
Request a Password Reset
Download Documents
Download Documents
Get Help to Participate in This Tender
Change Password
For better security, update the account password.
The NATIONAL HEALTH LABORATORY SERVICE has issued a Tender notice for the procurement of a Renovations to Wentworth Laboratory in the South Africa. This Tender notice was published on 12 Nov 2022 and is scheduled to close on 25 Nov 2022, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 74441730, while the tender notice number is 1692950 and Registering on the platform.
Procurement Summary
Country: South Africa
Summary: Renovations to Wentworth Laboratory
Deadline: 25 Nov 2022
Posting Date: 12 Nov 2022
Other Information
Notice Type: Tender
TOT Ref.No.: 74441730
Document Ref. No.: 1692950
Competition: ICB
Financier: Self Financed
Purchaser Ownership: Public
Tender Value: Refer Document
Purchaser's Detail
Name: Login to see tender_details
Address: Login to see tender_details
Email: Login to see tender_details
Login to see detailsTender Details
Quotation are invited for Renovations to Wentworth Laboratory
1 Remove existing benches, cupboards, sinks, basin,
shelves and taps and make good
Item
2 Remove exiting door and half, supply and fit aluminium
frame with 6mm safety laminated glass door and half, fit
industrial door handle with separate lockset, supply and fit
4 heavy duty hinges to doors, bottom half of door must be
solid aluminium and top half must be clear glass, door
approximately 1400mm wide
No 1
3 Remove exiting door, supply and fit aluminium frame with
6
mm safety laminated glass door, fit industrial door handle
with separate lockset, supply and fit 4 heavy duty hinges
to door, bottom half of door must be solid aluminium and
top half must be clear glass, door approximately 900mm
wide
No 1
4 Supply and fit door closers with Pelmet arm to both new
doors
No 2
5 Remove existing flooring, prepare floor to smooth finish
using self-levelling screed, supply and install 2mm Eclipse
PUR vinyl sheeting with welded joints as per specification,
m2 50
vinyl must go up the wall 120mm high include cove fillet and
capping as per specification
6 Remove all loose and peeling paint from walls, where
necessary rhinolite walls to smooth finish, Prepare and
paint walls, 2 coats, Plascon Double Velvet, as per
specification
m2 1860
7 Remove all loose and peeling paint from ceiling, where
necessary rhinolite ceiling to smooth finish, Prepare and
paint ceiling, 2 coats white Plascon Double Velvet, as per
specification
m2 350
8 Prepare and paint door frames 2 coats Plascon Enamel as
per specification
No 2
9 Remove brick wall and slate top and make good, 1000mm
x 1000mm
No 2
10 Supply and fit 5ft double tube LED light fittings with clip on
covers to match existing
No 3
11 Supply and fit tinting to all windows, 9700mm x 950mm No 1
12 Supply and install 30mm x 30mm steel square tubing frame,
800mm wide and 880mm high, on adjustable inserts, must
be powder coated as per specification
m 9.7
13 Supply and fit 15mm x 900mm wide, top shall be off approved
Phenolic Resin. Top shall be impervious core that is
chemical and heat resistant fixed to steel frames, height,
similar to Fundermax tops, against wall with windows
m 9.7
14 Supply and install 30mm x 30mm steel square tubing frame,
800mm wide and 880mm high, on adjustable inserts, must
be powder coated as per specification
m 4
15 Supply and fit 15mm x 900mm wide, top shall be off approved
Phenolic Resin. Top shall be impervious core that is
chemical and heat resistant fixed to steel frames, height,
similar to Fundermax tops, against wall with windows
m 4
16 Supply and install 30mm x 30mm steel square tubing frame,
900mm wide and 880mm high, on adjustable inserts, must
be powder coated as per specification
m 3.7
17 Supply and fit 15mm x 1000mm wide, top shall be off
approved Phenolic Resin. Top shall be impervious core
that is chemical and heat resistant fixed to steel frames,
similar to Fundermax tops, center bench
m 3.7
18 Supply and install 30mm x 30mm steel square tubing frame,
900mm wide and 880mm high, on adjustable inserts, must
be powder coated as per specification
m 1.2
19 Supply and fit 15mm x 1000mm wide, top shall be off
approved Phenolic Resin. Top shall be impervious core
m 1.2
that is chemical and heat resistant fixed to steel frames,
similar to Fundermax tops, centrifuge bench
20 Supply and install 30mm x 30mm steel square tubing frame,
500mm wide and 740mm high, on adjustable inserts, must
be powder coated as per specification
m 1.2
21 Supply and fit 15mm x 600mm wide, top shall be off approved
Phenolic Resin. Top shall be impervious core that is
chemical and heat resistant fixed to steel frames, similar
to Fundermax tops, microscope bench
m 1.2
22 Remove existing power skirting, supply and fit “Cabstrut
Jupiter”, steel, 2 Compartment type, allow for bends and
end caps, power skirting from wire ways for power and
data reticulation and will be able to accommodate future
expansion
m 23
23 Supply and fit 15 amp standard power skirting Crabtree
plug points, wired from distribution board, allow 4 plugs per
circuit to prevent overloading, all circuits and plug on
skirting to be marked, allow for 25 amp singles phase
circuit breakers
No 20
24 Supply and fit aluminium power poles fastened to roof and
on concrete floor, to accommodate data and electrical
wiring for Centre bench
No 1
25 Supply and fit aluminium power poles fastened to roof and
on concrete floor, to accommodate data and electrical
wiring for centrifuge bench, fit 3 x 15 amp Crabtree plug
points to power pole
No 1
26 Supply and fit Black staining integral sink, 560mm x
360mm x 230mm deep with waste grate and
Polypropylene bottle trap, connect to water supply and
drainage
No 2
27 Supply and fit movable swan neck serrated nozzle tap to
sink, connect to water supply including shut off valve
No 2
28 Supply and fit porcelain hand wash basin with hospital
elbow taps, connect to hot and cold supply and drainage,
allow for splash back tiles above basin
No 1
29 Supply and fit steel powder coated wall cupboards with
doors, 750mm high x 900mm wide x 330mm deep with shelve
as per specification
No 3
30 Supply and deliver steel powder coated under bench
cupboards 800mm high x 900mm with 2 lockable drawers
on top and doors and shelve at bottom on lockable castor
wheels as per specification
No 8
31 Repair/ Replace all broken or missing window handles Item
32 All windows in lab to be tinted, take measurements on site No 33
33 Remove all loose and peeling paint from ceiling and walls,
where necessary rhinolite to smooth finish, Prepare and
paint, 2 coats white Plascon Double Velvet, as per
specification to Managers Office
m2 60
34 Supply and fit wall band shelving, 16mm melamine wrap
around, 500mm deep x 2500mm long x 5 rows
Item
35 All electrical wiring in Chem/Haem to be re-directed to new
distribution board
Item
36 Supply and install 30mm x 30mm steel square tubing frame,
900mm wide and 880mm high, on adjustable inserts, must
be powder coated as per specification
m 1.5
37 Supply and fit 15mm x 1000mm wide, top shall be off
approved Phenolic Resin. Top shall be impervious core
that is chemical and heat resistant fixed to steel frames,
similar to Fundermax tops, centrifuge bench
m 1.5
38 Supply and deliver double door 1800mm high Mahogany
filling cabinet with 4 shelves and lockable door
No 2
Plumbing certificate on completion Item
Electrical certificate COC on completion Item,
Remove all rubble from site Item
Documents
Procurement Documents for South Africa
Access a comprehensive library of standard procurement documents specific to South Africa. Here, you'll find all the essential forms, guidelines, and templates required for tender applications and submissions in South Africa
Want To Bid in This Tender?
Get Local Agent Support in South Africa and 60 More Countries.
View Tenders By
Sign in with Google