Provision of Rig & Drilling Ancillary Services Tender, Nigeria - 62249052

Procurement Summary

Country : Nigeria

Summary : Provision of Rig & Drilling Ancillary Services

Deadline : 31 Jan 2022

Other Information

Notice Type : Tender

TOT Ref.No.: 62249052

Document Ref. No. :

Financier : Self Financed

Purchaser Ownership : -

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Tenders are invited for Provision of Rig & Drilling Ancillary Services (Call-Out/Call-Off) Contract for Oml152 Drilling Campaign.

A SUMMARY OF WORK REQUIREMENTS IS AS FOLLOWS:
• Detailed Engineering Design (DED) of the Process Facilities
• Safety Studies
• Procurement and Manufacturing
• Mechanical Installation, Electrical Instrumentation and Control Hook-up
• Pre-Commissioning and Commissioning
• Operations and Maintenance
• Provision of chemicals such as de-emulsifiers, methanol, antifoam agents and other process fluids required for the operation of the facility
• Provision of fuels, oil, etc. for commissioning and operation of the facility
• Mechanical Handling/haulage/Crane at site
• Open Drain Systems
• Security, safety and health support infrastructure, including medic
• Communication on site
• Effective Community Relations and Management, Manage all community issues throughout construction phase and during operations.
• Effective Project Supervision and Management
In designing the EPF, the following vital criteria will be considered:
• Compression capacity- 2 x 100% (60 mmscfd each)
• Average expected Well Head Pressure range of Efe field estimated at between 300 and 4000 psi
• Average well head temperature estimated at between 72 and 890F
• HP separator pressure at 250-600psig
• MP separator at 100 - 300 psig
• LP separator at 14.5 -100 psig
• Test Separator at 14.5 - 600psig
• Storage tanks (Atmospheric/gas blanket)
• Export Oil BS&W - 5%
• maximum oil in water content- 5ppm
• export line pressure (150 + 650) = 800psig at pump discharge
on completion of the epf, it shall consist of the following but not limited to:
• production manifold with hp, ip, lp and test headers
• production equipment/machineries (continuous duty and standby generators; including black start); air compressors, 3-phase separators (hp, mp, lp and test), and hydrocyclone.
• gas scrubbers and filter separators
• gas compressors
• gas coolers
• export pumps (2 + 1 spare) (20, 000bopd @ 800psi) - one (1) gas driven, two (2) electric motor driven.
• water treatment unit + pumps
• safety and shutdown systems (esd)
• interconnecting/process piping
• pipeline systems
• equipment foundation
• office/control/mess room
• staff accommodation
• maintenance workshop
• in-plant road works
• utilities-fuel gas, air and water
• fire-fighting system (deluge and fusible plugs); smoke, gas and fire detector systems
• storage tanks with spark/flame arrester/breather valves of 2 x 10, 000bbls capacity
• potable water system/storage tanks for fire-fighting, utilities, messing, office/workshop and warehouse.
• galvanized perimeter fence (citadel/bakaert/jackson fence system)
• office/control/mess room
• staff accommodation
• maintenance workshop
• in-plant road works
• utilities - fuel gas, air and water
• fire-fighting system (deluge and fusible plugs); smoke, gas and fire detector systems
• storage tanks with spark/flame arrester/breather valves of 2 x 10, 000bbls capacity
• potable water system/storage tanks for fire-fighting, utilities, messing, office/workshop and warehouse.
• galvanized perimeter fence (citadel/bakaert/jackson fence system)
• pre-heaters
• free water knockout vessel
• precipitator vessel
• heater-treater
• others as may be recommended.

only tenderers who are registered with njqs in the product/service category code 4.06.01/4.06.02 as at 5:00 pm on 31 january 2022 being the advert closing date shall be invited to submit technical and commercial bids.

Documents

 Tender Notice