KEMPTEN UNIVERSITY OF APPLIED SCIENCES has floated a tender for Procurement of Test Test Stands for Nt-Pem Fuel Cells - Laboratory Equipment. The project location is Germany and the tender is closing on 22 Apr 2024. The tender notice number is 172974-2024, while the TOT Ref Number is 99186271. Bidders can have further information about the Tender and can request the complete Tender document by Registering on the site.

Expired Tender

Procurement Summary

Country : Germany

Summary : Procurement of Test Test Stands for Nt-Pem Fuel Cells - Laboratory Equipment

Deadline : 22 Apr 2024

Other Information

Notice Type : Tender

TOT Ref.No.: 99186271

Document Ref. No. : 172974-2024

Competition : ICB

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Purchaser : KEMPTEN UNIVERSITY OF APPLIED SCIENCES
Address: Bahnhofstrasse 61
Town: Kempten
NUTS-Code: DE273
Postal Code: 87435
Phone: 49 83125230
Germany
Email :post@hs-kempten.de
URL :https://www.deutsche-evergabe.de

Tender Details

Procurement of test test stands for NT-PEM fuel cells - laboratory equipment

In the recently set up hydrogen laboratory at Kempten University, three test stands are required for the characterization of membrane electrode units. The scope of application of the test bench extends to:Evaluation of low temperature PEM fuel cells. For this purpose, various electrochemical analysis methods such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), polarization curves or current limiting experiments are carried out under different conditions. TheFuel cells are tested in individual cells. Test parameters to be controlled include (but are not limited to): Current, Cell Temperature, Gas Flows (Anode and Cathode), Gas Supply Air Temperature (Anode and Cathode), Gas Relative Humidity (Anode and Cathode), Gas Supply/Exhaust Air Dpressure (anode and cathode).

Depending on the configuration of the test bench, gas supplies for hydrogen, oxygen, compressed air, dilute CO (1% CO in N2) and nitrogen should be included. The test cell should be supplied with controllable gas flows at the anode and cathode. Depending on the test bench, the anode should be fitted withignited gases can be operated in variable mixtures to simulate a reformate composition. Furthermore, a gas supply line with heated lines must be connected directly to the anode supply line and the cathode supply line of the cell.

Doc Title: Procurement of test test stands for...
Document Type: Contract Notice
Reference Number: 24-03-028 TS
Contract Type: supplies
Estimated Value: 0.00 - EUR
Authority Type: pub-undert
Doc Title: Procurement of test test stands for NT-PEM fuel cells - laboratory equipment
Dispatch Date: 2024-03-21
Publish Date: 2024-03-22
Submission Date: 2024-04-22

Documents

 Tender Notice