Electrical installation works according Tender in Burundi - 4037805

Procurement Summary

Country: Burundi

Summary: Electrical installation works according to the specifications in Appendix 1 in Kiosks Unique Provincials five pilot provinces.

Deadline: 27 Oct 2015

Posting Date: 17 Oct 2015

Other Information

Notice Type: Tender

TOT Ref.No.: 4037805

Document Ref. No.: 26031, RFQ GUP ELEC 2015

Competition: ICB

Financier: United Nations Secretariat

Purchaser Ownership: -

Tender Value: Refer Document

CPV Classification

45311000 - Electrical wiring and fitting work

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_detailsLogin to see details

Tender Details

Quotations for Electrical installation works according to the specifications in Appendix 1 in Kiosks Unique Provincials five pilot provinces.
Technical specifications - GUP Gitega

Installing compact fluorescent lamps 18W maximum power C M: Pce

Integrated LED ceiling installation (3x4W)

Dimensions: Ø 352 x H 78 mm.

C M: Pce

Lighting installation Centure 2 for surface mounting

T8 Fluorescent tube not included

Contemporary optical design L1

Equipped; electronic ballast (HF) UGR22

C M: Pce

Fluorescent Recessed luminaire installation TBS 165

C M: Pce

Typical installation trunking Linolite polycarbonate diffuser wall sconce S19Eo

L445xl Dimensions 64mm x D 90mm

Colours: Blanx IP 24-IK07

C M: Pce

Waterproof strip installation T8

Use: local wet atmosphere. Injected polycarbonate body self-extinguishing. Fully wired. Polycarbonate diffuser. Electronic Ballast HFW / T8. Power supply: 220/240 V - 50/60 Hz IP66 - IK08.. Class 1. (...)

C M: Pce

Installation of Single Wall Switches IPX2 Mechanism protected against direct contact. 250 V voltage

C M: Pce

IP 2X mechanisms protected against direct contact. Voltage: 250 V ~. Delivered open terminals. Colours: White.

C M: Pce

Installing electrical outlets, current: 16A voltage: 250 V. For installation in flush-mounting box, frame projection workstation kit, floor box, column block, block nurse, office and chute block. Ref. : 357715

C M: Pce

Distribution board installation: Fixed 19-inch box with side ventilation louvres. Amounts 19-inch galvanized depth adjustable (4 positions) and precut for the passage of cables. Removable bottom and front door reversible opening to more than 180 °. Safety glass with lock. IP20 protection grade

C M: Pce

Installing Plexo weatherproof enclosures 12 modules / row: Self-extinguishing: glow wire 750 ° C IP 65 IK 09. Class II. Total reversibility door and cabinet. Rail 2 positions for modular products. Distance between rails: 150 mm. Lockable door handle. Sealable cap and bib

C M: Pce

Installing dual phone jack: Biplite for 2 different lines on the same contactor

C M: Mosaic Pce television sockets Installation

Fast connection without tools. Colours: White.

C M: Pce Earth spike Installation

For the safety of electrical installations. Grounding essential elements of your installations: pipes inside (heating, gas, water, air and table) and metallic body (devices (...)

C M: Pce molded material Box Installation IP 40 - IK 04. Supplied without terminal. Snap cap can be screwed. Base comprising a rail which receives the strips 10 to separate terminals. Dimensions: 100 x 80 x 36 mm. Equipment: 6/10/16 mm². Track Length: 84 mm

C M: Pce ionised smoke detector installation: Device for use in a tertiary environment, ERP, etc. with networking on DAD cabinet. Ivory colored ABS terpolymer. High performance analysis room with photocell and light source. Power supply: DC 16-28 V. Consumption (under 24V) 130 uA in standby and 28mA in alarm. Dimensions: Ø 102 x 46 mm thickness

C M: Pce heat detector installation: light diffuser visual diffuser to alert in case of fire alarm, the deaf and hard about the need to evacuate lieux.Conformes with NF EN, CE and CPD NF SSI. Fixing surface or flush mounted. IP 40 - IK 07

C M: Pce red manual release Installation: Complies with the NF EN, CE certified DPC and NF SSI. Triggered by pressure in the center of the membrane. Reset with special key provided with the product. Fixing surface or flush mounted. IP 40 - IK 07. Class II.

C M: Pce Installing audible fire alarm: Surface mounting. Red Flash. Sound: 90 dB at 2 m (Class B). IP42 - IK07. Product Standard: Complies with EN 54-3, NF S 32-001 and CE DPC and NF SSI.

C M: Pce electrical cables VOB 1.5 mm2 Installation: Hard wire HO7 VU (solid round copper) PVC insulating sheath. Uses: residential premises of circuits led arises under or in wand. Wiring and wiring tables and equipment;

C M: ml to electrical cables VOB 2.5 mm2 Installation: Hard wire HO7 VU (solid round copper) PVC insulating sheath. Uses: residential premises of circuits led arises under or in wand. Wiring and wiring tables and equipment; C M: the installation of telephone cables ml 0.6mm: PVC insulation. Assembly in pairs. Tape to maintain the assembled cable. Polyester coated aluminum screen. Nylon thread for tearing of the sheath. PVC jacket. Uses: private telephony systems installed outside buildings. Laying buried permitted. Current weak links of general applications requiring drivers assembled in pairs. Product Standard: Marking: according to standard NFC 93-529. CM: At ml

Technical specifications - GUP Ngozi

Installing compact fluorescent lamps 18W maximum power C M: Pce

Integrated LED ceiling installation (3x4W)

Dimensions: Ø 352 x H 78 mm.

C M: Pce

Lighting installation Centure 2 for surface mounting

T8 Fluorescent tube not included

Contemporary optical design L1

Equipped; electronic ballast (HF) UGR22

C M: Pce

Fluorescent Recessed luminaire installation TBS 165

C M: Pce

Typical installation trunking Linolite polycarbonate diffuser wall sconce S19Eo

L445xl Dimensions 64mm x D 90mm

Colours: Blanx IP 24-IK07

C M: Pce

Waterproof strip installation T8

Use: local wet atmosphere. Injected polycarbonate body self-extinguishing. Fully wired. Polycarbonate diffuser. Electronic Ballast HFW / T8. Power supply: 220/240 V - 50/60 Hz IP66 - IK08.. Class 1. (...)

C M: Pce

Installation of Single Wall Switches IPX2 Mechanism protected against direct contact. 250 V voltage

C M: Pce

IP 2X mechanisms protected against direct contact. Voltage: 250 V ~. Delivered open terminals. Colours: White.

C M: Pce

Installing electrical outlets, current: 16A voltage: 250 V. For installation in flush-mounting box, frame projection workstation kit, floor box, column block, block nurse, office and chute block. Ref. : 357715

C M: Pce

Distribution board installation: Fixed 19-inch box with side ventilation louvres. Amounts 19-inch galvanized depth adjustable (4 positions) and precut for the passage of cables. Removable bottom and front door reversible opening to more than 180 °. Safety glass with lock. IP20 protection grade

C M: Pce

Installing Plexo weatherproof enclosures 12 modules / row: Self-extinguishing: glow wire 750 ° C IP 65 IK 09. Class II. Total reversibility door and cabinet. Rail 2 positions for modular products. Distance between rails: 150 mm. Lockable door handle. Sealable cap and bib

C M: Pce

Installing dual phone jack: Biplite for 2 different lines on the same contactor

C M: Mosaic Pce television sockets Installation

Fast connection without tools. Colours: White.

C M: Pce Earth spike Installation

For the safety of electrical installations. Grounding essential elements of your installations: pipes inside (heating, gas, water, air and table) and metallic body (devices (...)

C M: Pce molded material Box Installation IP 40 - IK 04. Supplied without terminal. Snap cap can be screwed. Base comprising a rail which receives the strips 10 to separate terminals. Dimensions: 100 x 80 x 36 mm. Equipment: 6/10/16 mm². Track Length: 84 mm

C M: Pce ionised smoke detector installation: Device for use in a tertiary environment, ERP, etc. with networking on DAD cabinet. Ivory colored ABS terpolymer. High performance analysis room with photocell and light source. Power supply: DC 16-28 V. Consumption (under 24V) 130 uA in standby and 28mA in alarm. Dimensions: Ø 102 x 46 mm thickness

C M: Pce heat detector installation: light diffuser visual diffuser to alert in case of fire alarm, the deaf and hard about the need to evacuate lieux.Conformes with NF EN, CE and CPD NF SSI. Fixing surface or flush mounted. IP 40 - IK 07

C M: Pce red manual release Installation: Complies with the NF EN, CE certified DPC and NF SSI. Triggered by pressure in the center of the membrane. Reset with special key provided with the product. Fixing surface or flush mounted. IP 40 - IK 07. Class II.

C M: Pce Installing audible fire alarm: Surface mounting. Red Flash. Sound: 90 dB at 2 m (Class B). IP42 - IK07. Product Standard: Complies with EN 54-3, NF S 32-001 and CE DPC and NF SSI.

C M: Pce electrical cables VOB 1.5 mm2 Installation: Hard wire HO7 VU (solid round copper) PVC insulating sheath. Uses: residential premises of circuits led arises under or in wand. Wiring and wiring tables and equipment;

C M: ml to electrical cables VOB 2.5 mm2 Installation: Hard wire HO7 VU (solid round copper) PVC insulating sheath. Uses: residential premises of circuits led arises under or in wand. Wiring and wiring tables and equipment; C M: the installation of telephone cables ml 0.6mm: PVC insulation. Assembly in pairs. Tape to maintain the assembled cable. Polyester coated aluminum screen. Nylon thread for tearing of the sheath. PVC jacket. Uses: private telephony systems installed outside buildings. Laying buried permitted. Current weak links of general applications requiring drivers assembled in pairs. Product Standard: Marking: according to standard NFC 93-529. CM: At ml

Technical specifications - GUP Mwaro Installing compact fluorescent lamps 18W maximum power CM: Pce

1. LED ceiling installation included (3x4W)

Dimensions: Ø 352 x H 78 mm.

C M: Pce

2. Installing Lighting Centure 2 for surface mounting

T8 Fluorescent tube not included

Contemporary optical design L1

Equipped; electronic ballast (HF) UGR22

C M: Pce

3. Fluorescent Recessed luminaire installation TBS 165

C M: Pce

4. Installation strips kind Linolite polycarbonate diffuser wall sconce S19Eo

L445xl Dimensions 64mm x D 90mm

Colours: Blanx IP 24-IK07

C M: Pce

5. Install waterproof strip T8

Use: local wet atmosphere. Injected polycarbonate body self-extinguishing. Fully wired. Polycarbonate diffuser. Electronic Ballast HFW / T8. Power supply: 220/240 V - 50/60 Hz IP66 - IK08.. Class 1. (...)

C M: Pce

6. Installation of Single Wall Switches IPX2 Mechanism protected against direct contact. 250 V voltage

C M: Pce

7. Mechanisms IP 2X protected against direct contact. Voltage: 250 V ~. Delivered open terminals. Colours: White.

C M: Pce

8. Installation of power outlets, current: 16A voltage: 250 V. For installation in flush-mounting box, protruding part, workstation kit, floor box, column block, block nurse, office and chute block. Ref. : 357715

C M: Pce

9. distribution board installation: fixed box 19 inches with side ventilation louvres. Amounts 19-inch galvanized depth adjustable (4 positions) and precut for the passage of cables. Removable bottom and front door reversible opening to more than 180 °. Safety glass with lock. IP20 protection grade

C M: Pce

10. Installing Plexo weatherproof enclosures 12 modules / row: Self-extinguishing: glow wire 750 ° C IP 65 IK 09. Class II. Total reversibility door and cabinet. Rail 2 positions for modular products. Distance between rails: 150 mm. Lockable door handle. Sealable cap and bib

C M: Pce

11. Installing double Telephone connection: Biplite for 2 different lines on the same contactor

C M: Pce

12. Mosaic sockets TV installation

Fast connection without tools. Colours: White.

C M: Pce

13. Earth spike Installation

For the safety of electrical installations. Grounding essential elements of your installations: pipes inside (heating, gas, water, air and table) and metallic body (devices (...)

C M: Pce

14. Installing molded material Box IP 40 - IK 04. Supplied without terminal. Snap cap can be screwed. Base comprising a rail which receives the strips 10 to separate terminals. Dimensions: 100 x 80 x 36 mm. Equipment: 6/10/16 mm². Track Length: 84 mm

C M: Pce

15. ionised smoke detector installation: Device for use in a tertiary environment, ERP, etc. with networking on DAD cabinet. Ivory colored ABS terpolymer. High performance analysis room with photocell and light source. Power supply: DC 16-28 V. Consumption (under 24V) 130 uA in standby and 28mA in alarm. Dimensions: Ø 102 x 46 mm thickness

C M: Pce

16. Heat Detector Installation: visual light diffuser Diffuser to alert in case of fire alarm, the deaf and hard about the need to evacuate lieux.Conformes with NF EN, CE certified DPC and NF SSI . Fixing surface or flush mounted. IP 40 - IK 07

C M: Pce

17. Installing Red manual release: Complies with the NF EN, CE certified DPC and NF SSI. Triggered by pressure in the center of the membrane. Reset with special key provided with the product. Fixing surface or flush mounted. IP 40 - IK 07. Class II.

C M: Pce

18. Installation of fire alarm sound: Surface mounting. Red Flash. Sound: 90 dB at 2 m (Class B). IP42 - IK07. Product Standard: Complies with EN 54-3, NF S 32-001 and CE DPC and NF SSI.

C M: Pce

19. Installation of electric cables VOB 1.5 mm2 Rigid cable HO7 VU (solid round copper) PVC insulating sheath. Uses: residential premises of circuits led arises under or in wand. Wiring and wiring tables and equipment;

CM: At ml

20. Installation of electric cables VOB 2.5 mm2 Rigid cable HO7 VU (solid round copper) PVC insulating sheath. Uses: residential premises of circuits led arises under or in wand. Wiring and wiring tables and equipment; CM: At ml

21. Installation of telephone cables 0.6mm: PVC insulation. Assembly in pairs. Tape to maintain the assembled cable. Polyester coated aluminum screen. Nylon thread for tearing of the sheath. PVC jacket. Uses: private telephony systems installed outside buildings. Laying buried permitted. Current weak links of general applications requiring drivers assembled in pairs. Product Standard: Marking: according to standard NFC 93-529. CM: At ml

Technical specifications - GUP MUYINGA

Compact fluorescent lamps installation maximum power of 18W CM: Pce

1. LED ceiling installation included (3x4W)

Dimensions: Ø 352 x H 78 mm.

C M: Pce

2. Installing Lighting Centure 2 for surface mounting

T8 Fluorescent tube not included

Contemporary optical design L1

Equipped; electronic ballast (HF) UGR22

C M: Pce

3. Fluorescent Recessed luminaire installation TBS 165

C M: Pce

4. Installation strips kind Linolite polycarbonate diffuser wall sconce S19Eo

L445xl Dimensions 64mm x D 90mm

Colours: Blanx IP 24-IK07

C M: Pce

5. Install waterproof strip T8

Use: local wet atmosphere. Injected polycarbonate body self-extinguishing. Fully wired. Polycarbonate diffuser. Electronic Ballast HFW / T8. Power supply: 220/240 V - 50/60 Hz IP66 - IK08.. Class 1. (...)

C M: Pce

6. Installation of Single Wall Switches IPX2 Mechanism protected against direct contact. 250 V voltage

C M: Pce

7. Mechanisms IP 2X protected against direct contact. Voltage: 250 V ~. Delivered open terminals. Colours: White.

C M: Pce

8. Installation of power outlets, current: 16A voltage: 250 V. For installation in flush-mounting box, protruding part, workstation kit, floor box, column block, block nurse, office and chute block. Ref. : 357715

C M: Pce

9. distribution board installation: fixed box 19 inches with side ventilation louvres. Amounts 19-inch galvanized depth adjustable (4 positions) and precut for the passage of cables. Removable bottom and front door reversible opening to more than 180 °. Safety glass with lock. IP20 protection grade

C M: Pce

10. Installing Plexo weatherproof enclosures 12 modules / row: Self-extinguishing: glow wire 750 ° C IP 65 IK 09. Class II. Total reversibility door and cabinet. Rail 2 positions for modular products. Distance between rails: 150 mm. Lockable door handle. Sealable cap and bib

C M: Pce

11. Installing double Telephone connection: Biplite for 2 different lines on the same contactor

C M: Pce

12. Mosaic sockets TV installation

Fast connection without tools. Colours: White.

C M: Pce

13. Earth spike Installation

For the safety of electrical installations. Grounding essential elements of your installations: pipes inside (heating, gas, water, air and table) and metallic body (devices (...)

C M: Pce

14. Installing molded material Box IP 40 - IK 04. Supplied without terminal. Snap cap can be screwed. Base comprising a rail which receives the strips 10 to separate terminals. Dimensions: 100 x 80 x 36 mm. Equipment: 6/10/16 mm². Track Length: 84 mm

C M: Pce

15. ionised smoke detector installation: Device for use in a tertiary environment, ERP, etc. with networking on DAD cabinet. Ivory colored ABS terpolymer. High performance analysis room with photocell and light source. Power supply: DC 16-28 V. Consumption (under 24V) 130 uA in standby and 28mA in alarm. Dimensions: Ø 102 x 46 mm thickness

C M: Pce

16. Heat Detector Installation: visual light diffuser Diffuser to alert in case of fire alarm, the deaf and hard about the need to evacuate lieux.Conformes with NF EN, CE certified DPC and NF SSI . Fixing surface or flush mounted. IP 40 - IK 07

C M: Pce

17. Installing Red manual release: Complies with the NF EN, CE certified DPC and NF SSI. Triggered by pressure in the center of the membrane. Reset with special key provided with the product. Fixing surface or flush mounted. IP 40 - IK 07. Class II.

C M: Pce

18. Installation of fire alarm sound: Surface mounting. Red Flash. Sound: 90 dB at 2 m (Class B). IP42 - IK07. Product Standard: Complies with EN 54-3, NF S 32-001 and CE DPC and NF SSI.

C M: Pce

19. Installation of electric cables VOB 1.5 mm2 Rigid cable HO7 VU (solid round copper) PVC insulating sheath. Uses: residential premises of circuits led arises under or in wand. Wiring and wiring tables and equipment;

CM: At ml

20. Installation of electric cables VOB 2.5 mm2 Rigid cable HO7 VU (solid round copper) PVC insulating sheath. Uses: residential premises of circuits led arises under or in wand. Wiring and wiring tables and equipment; CM: At ml

21. Installation of telephone cables 0.6mm: PVC insulation. Assembly in pairs. Tape to maintain the assembled cable. Polyester coated aluminum screen. Nylon thread for tearing of the sheath. PVC jacket. Uses: private telephony systems installed outside buildings. Laying buried permitted. Current weak links of general applications requiring drivers assembled in pairs. Product Standard: Marking: according to standard NFC 93-529. CM: At ml

Technical specifications - GUP BURURI

Compact fluorescent lamps installation maximum power of 18W CM: Pce

1. LED ceiling installation included (3x4W)

Dimensions: Ø 352 x H 78 mm.

C M: Pce

2. Installing Lighting Centure 2 for surface mounting

T8 Fluorescent tube not included

Contemporary optical design L1

Equipped; electronic ballast (HF) UGR22

C M: Pce

3. Fluorescent Recessed luminaire installation TBS 165

C M: Pce

4. Installation strips kind Linolite polycarbonate diffuser wall sconce S19Eo

L445xl Dimensions 64mm x D 90mm

Colours: Blanx IP 24-IK07

C M: Pce

5. Install waterproof strip T8

Use: local wet atmosphere. Injected polycarbonate body self-extinguishing. Fully wired. Polycarbonate diffuser. Electronic Ballast HFW / T8. Power supply: 220/240 V - 50/60 Hz IP66 - IK08.. Class 1. (...)

C M: Pce

6. Installation of Single Wall Switches IPX2 Mechanism protected against direct contact. 250 V voltage

C M: Pce

IP 2X mechanisms protected against direct contact. Voltage: 250 V ~. Delivered open terminals. Colours: White.

C M: Pce

7. Install electrical outlets, current: 16A voltage: 250 V. For installation in flush-mounting box, protruding part, workstation kit, floor box, column block, block nurse, office and chute block. Ref. : 357715

C M: Pce

8. distribution board installation: fixed box 19 inches with side ventilation louvres. Amounts 19-inch galvanized depth adjustable (4 positions) and precut for the passage of cables. Removable bottom and front door reversible opening to more than 180 °. Safety glass with lock. IP20 protection grade

C M: Pce

9. Installing Plexo weatherproof enclosures 12 modules / row: Self-extinguishing: glow wire 750 ° C IP 65 IK 09. Class II. Total reversibility door and cabinet. Rail 2 positions for modular products. Distance between rails: 150 mm. Lockable door handle. Sealable cap and bib

C M: Pce

10. Installing double Telephone connection: Biplite for 2 different lines on the same contactor

C M: Pce

11. Mosaic sockets TV installation

Fast connection without tools. Colours: White.

C M: Pce

12. Earth spike Installation

For the safety of electrical installations. Grounding essential elements of your installations: pipes inside (heating, gas, water, air and table) and metallic body (devices (...)

C M: Pce

13. Installing molded material Box IP 40 - IK 04. Supplied without terminal. Snap cap can be screwed. Base comprising a rail which receives the strips 10 to separate terminals. Dimensions: 100 x 80 x 36 mm. Equipment: 6/10/16 mm². Track Length: 84 mm

C M: Pce

14. ionised smoke detector installation: Device for use in a tertiary environment, ERP, etc. with networking on DAD cabinet. Ivory colored ABS terpolymer. High performance analysis room with photocell and light source. Power supply: DC 16-28 V. Consumption (under 24V) 130 uA in standby and 28mA in alarm. Dimensions: Ø 102 x 46 mm thickness

C M: Pce

15. Heat Detector Installation: visual light diffuser Diffuser to alert in case of fire alarm, the deaf and hard about the need to evacuate lieux.Conformes with NF EN, CE certified DPC and NF SSI . Fixing surface or flush mounted. IP 40 - IK 07

C M: Pce

16. Red manual release Installation: Complies with the NF EN, CE certified DPC and NF SSI. Triggered by pressure in the center of the membrane. Reset with special key provided with the product. Fixing surface or flush mounted. IP 40 - IK 07. Class II.

C M: Pce

17. Installation of fire alarm sound: Surface mounting. Red Flash. Sound: 90 dB at 2 m (Class B). IP42 - IK07. Product Standard: Complies with EN 54-3, NF S 32-001 and CE DPC and NF SSI.

C M: Pce

18. Installation of electric cables VOB 1.5 mm2 Rigid cable HO7 VU (solid round copper) PVC insulating sheath. Uses: residential premises of circuits led arises under or in wand. Wiring and wiring tables and equipment;

CM: At ml

19. Installation of electric cables VOB 2.5 mm2 Rigid cable HO7 VU (solid round copper) PVC insulating sheath. Uses: residential premises of circuits led arises under or in wand. Wiring and wiring tables and equipment; CM: At ml

20. Installation of telephone cables 0.6mm: PVC insulation. Assembly in pairs. Tape to maintain the assembled cable. Polyester coated aluminum screen. Nylon thread for tearing of the sheath. PVC jacket. Uses: private telephony systems installed outside buildings. Laying buried permitted. Current weak links of general applications requiring drivers assembled in pairs. Product Standard: Marking: according to standard NFC 93-529.
[Disclaimer: The below text is machine translated. For accurate information kindly refer the above text in original language.]

Documents

 Tender Notice