Contract notice: Engineering design services for mechanical and electrical installations... Tender

Procurement Summary

Country : Germany

Summary : Contract notice: Engineering design services for mechanical and electrical installations for buildings

Deadline : 28 May 2018

Other Information

Notice Type : Tender

TOT Ref.No.: 22894880

Document Ref. No. : 188473-2018

Financier : Self Financed

Purchaser Ownership : -

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Object of the contract
Engineering design services for mechanical and electrical installations for buildings

Description: Contract notice: Engineering design services for mechanical and electrical installations for buildings

Authority Type: Utilities entity
Contact Nature: Services
Procedure: Negotiated procedure
Document: Contract notice
Regulation: European Union
Award criteria: The most economic tender
CPV code: 71321000, 71321000
CPV Description: Complete engineering services for the expansion of the Scharenstetten compressor station (VDS SST 600). Complete engineering services for the expansion of the Scharenstetten compressor station (VDS SST 600). Engineering services based on an existing design plan (Basic Engineering) for the replacement of two gas turbine compressor units at the Scharenstetten compressor station (VDS-SST 600), including the necessary ancillary equipment and other defined station equipment.

There are currently four gas turbine compressor units (ME1-4) on the Scharenstetten compressor station. These are sufficient, taking into account a reserve unit-Transport capacity of approx. 500 000 Nm / h.

The current Network Development Plan (NEP) 2016 lists a capacity provision in the area of terranets bw (tnbw), the fulfillment of which will increase VDS Scharenstetten, increasing the compressor capacity to approx Nm / h.

In addition, a reduction in emissions (NOx and CO) must also be achievedTwo of the machine units installed in Schar- lenstetten (ME1 and ME2) can not fulfill the emission limits required in the future, which necessitates a successive replacement of the two units tnbw strives first to exchange the machine unit (ME1) for a new one whosePower rating is such that the required new maximum transport capacity in operation with the compressor units ME3 and ME4 is achieved. In a second step, the other machine unit (ME2) is also exchanged for a more powerful model (same model as "ME1 new") Both new units are, as before, each driven by a gas turbinebe. The installation of the new machines should take place one after the other at the same location in the existing machine shop.

The station itself must also remain operational and functional during the construction work (except for any short-term planned station stoppages). H. the described replacement of the ME1 and ME2 will largely take place during ongoing operation-applying the associated operational and safety requirements.

The engineering services include at least:

- approval planning including preparation of the necessary documents for the execution of the approval procedures.

- scheduling and cost planning and monitoring.

- detailed engineering on the basis of the existing design planning (Basic Engineering). -the procurement documents required for procurement, technical bid evaluation, contract negotiation and award recommendation.

- Examination and commenting on the planning documents submitted by suppliers as well as technical and quality assurance.

- Construction supervision of the construction for machine exchange, construction site planning, coordination of all construction and assembly do Lie- Planning and coordination of the respective commissioning, including the preparation of operational readiness, test and trial operation, performance tests.

- Documentation check and compilation.

- Guarantee service.

Information and formalities required to ensure compliance with the requirements to check:

The candidate must be able to and be able to check the following points in-declare this document in writing. If the written declaration is not made, this will lead to exclusion from the procedure.

As proof of the above points, signed self-explanations (form at https://www.terranets-bw.de/aktuelles/ausschreibungen/) must be submitted in German.

If the proof is not enclosed, this leads to the exclusion from the procedure

7 Forms:

Information on the applicant (Form 1).

Self-declaration on the absence of grounds for exclusion and on entries in the Central Trade Register (Form 2).

Declaration on the execution of the contract in German (Form 3).

Information on turnover (Form 4)

Statement on economic and financial capacity (form 5).

Statement on technical and professional services

Competence List (Form 6)

Competitive Entries List (Form 7).

The candidate confirms: - that he is financially and economically motivated to perform the contract,

- that he is in possession of a public liability insurance covering a minimum amount of personal and personal cover Damage of at least EUR 5 000 000.


Internet address (URL): www.terranets-bw.de
Directive: Classical Directive (2014/25/EU)

Documents

 Tender Notice