Acquisition of Gates for the Game of Hallball and Ballball Ball with Bells Inside,... Tender

Procurement Summary

Country : Kazakhstan

Summary : Acquisition of Gates for the Game of Hallball and Ballball Ball with Bells Inside, Amt: 939107.13

Deadline : 16 Jul 2025

Other Information

Notice Type : Tender

TOT Ref.No.: 122624828

Document Ref. No. : 15075585-1

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : KZT 939107.13

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Lots: Golbol gates. The product is a collected gates with a net installed in the rear. To ensure the strength of the structure and high operational characteristics, the product must be made of steel pipes of a brand not lower than ST3 38x1.5mm and sheet steel of a brand not lower than ST3PS, at least 8 mm thick. The requirements for the design of the product in order to ensure convenient transportation and storage, the product must have a collapsible design. In order to ensure the convenience of assembly/disassembly, the product should consist of at least 5 racks made of a pipe, steel brand Not lower than ST3, an external diameter of 38mm, with a wall thickness of at least 1.5 mm. In order to ensure protection against mechanical damage and corrosion, the structure must have powder painting with the thickness of the applied layer of at least 250mm. The joints of the tubular structure of the product should be made on screws, through holes in pipes in an amount of at least 32pcs. In order to ensure safety, the design should not have sharp endings and angles, and should also have a coating made of foamed polyethylene, at least 13 mm thick. The product grid should be mounted in the back of the structure and have cells in size of at least 100x100mm, with a thread thickness of at least 3.5mm. Requirements for geometric sizes in order to ensure the correct dimensions corresponding to the standard sizes of the gate for the game in the hallball, the dimensions of the product should be at least VHSHHG: 1397x9156x1052mm. To ensure ...

Documents

 Tender Notice