Tank Liner Tender in USA - 82495887

Procurement Summary

Country: USA

Summary: Tank Liner

Deadline: 10 May 2023

Posting Date: 04 May 2023

Other Information

Notice Type: Tender

TOT Ref.No.: 82495887

Document Ref. No.: 12639523Q0169

Competition: ICB

Financier: Self Financed

Purchaser Ownership: Public

Tender Value: Refer Document

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

Description
1.0 PROJECT: Interior lining of existing Ground Storage Tank
2.0 LOCATION: U.S. Department of Agriculture (USDA), Animal and Plant Health Inspection Service (APHIS), Plant Protection Quarantine (PPQ), Moore Air Base, 22675 N. Moorefield Road, Edinburg Texas 78541
3.0 PROJECT BACKGROUND: Moore Air Base Galvanized Ground Storage Tank interior is corroded and is in need to install a liner to eliminate rust and protect the potable water and avoid state violations. The ground storage tank holds 43, 938 gallons of water and stand at 16 ft. tall, with a 21 ft. Diameter. The Ground Storage Tank is located in an open site which provides ample space for staging of the contractor-s equipment during the tank repair.
4.0 PROJECT SCOPE: Fabricate a tank liner using our NSF-61 compliant F-1 material formulation of flexible, modified polyvinyl chloride with a thickness of 0.065” on the sidewalls and on the floor. Also place a 6oz non-woven geotextile fabric between the substrate surface and the liner to level and protect the liner from being damaged by any uneven or rough areas on the tank surface. All plant-welds will be lap-weld, with a minimum 1/2" overlap. Thickness of the finished weld shall not be more than 0.010" more than the thickness of the un-welded original material. Connections (inlets, outlets, overflows, manhole) should be attached using a hot air welder. Internal penetrations should be lined with a sleeve that wraps around the pipe and sealed with a stainless-steel hose clamp. For external penetrations, the liner should go through the inside of the pipe and terminates at the flange face. Any nozzles will be field welded into the tank lining on site. The Ground Storage Tank is going to be placed out of service and drain the water. Once the Liner is in place and all field-welding is finished, the liner must be hydrostatically tested for leaks. Any problem locations must be identified and repaired by installation crew.
...
Active Contract Opportunity

Notice ID : 12639523Q0169

Related Notice

Department/Ind. Agency : AGRICULTURE, DEPARTMENT OF

Sub-tier : ANIMAL AND PLANT HEALTH INSPECTION SERVICE

Office : PPQ EDINBURG TX

General Information

Contract Opportunity Type: Solicitation (Original)

All Dates/Times are: (UTC-04:00) EASTERN STANDARD TIME, NEW YORK, USA

Original Published Date: May 03, 2023 08:13 am EDT

Original Date Offers Due: May 10, 2023 05:00 pm EDT

Inactive Policy: 15 days after date offers due

Original Inactive Date: May 25, 2023

Initiative: None
Classification

Original Set Aside: Total Small Business Set-Aside (FAR 19.5)

Product Service Code: J046 - MAINT/REPAIR/REBUILD OF EQUIPMENT- WATER PURIFICATION AND SEWAGE TREATMENT EQUIPMENT

NAICS Code: 237110 - Water and Sewer Line and Related Structures Construction
Place of Performance: Edinburg, TX 78541 USA

Documents

 Tender Notice

Sol_12639523Q0169.pdf