Supply & Install Solar Systems Tender, Yemen - 86607420

Procurement Summary

Country : Yemen

Summary : Supply & Install Solar Systems

Deadline : 15 Aug 2023

Other Information

Notice Type : Tender

TOT Ref.No.: 86607420

Document Ref. No. : 15823 - Aden

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Tenders are invited for Supply & Install Solar Systems in Multiple Locations within Aden Gov.

Solar PV Module:
Supply, install, test, and commission of solar tier-1 PV modules, the capacity
is not less than 540-560 W and should be comprised of either mono-crystalline
or polycrystalline.
- Conformity with CE and IEC 61215, IEC 61730, IEC 61701
IEC 61215, IEC 61730
ISO 9001: Quality Management System
ISO 14001: Environment Management System
ISO 45001: Occupational Health and Safety
IEC 62941: Design and Manufacture of Crystalline Silicon
Photovoltaic Modules or equivalent standards.
- Conversion efficiency should be not less than 20.9% under STC.
- The PV module shall perform satisfactorily in temperatures between - 40 C
to +85 C.
- The rated output power of any supplied module shall have a tolerance of 0-5
W.
- The module shall be provided with a junction box with IP67.
- The supplied module DC voltage should be not less than 1500 VDC.
- The product warranty should be at least 10 years.

Solar Inverter:
Operating temperature Range: -10 _ 55 C
INVERTER MODE:
Supply, install, test, and commissioning of single phase, pure sine wave, 230 V, 50Hz as per technical specifications shall
meet the following specifications:
- Shall produce pure sine waveform with provision for a battery charger
- include a parallel kit as required for three-phase operation.
- Total Harmonic Distortion shall be less than 3%.
- Designed for indoor enclosure IP 20.
- Maximum efficiency should be not less than 88 % at full load.
- Shall be certified to meet CE and UL marking and compliant with IEC 62109.
- The device should be integrated with LED indicators and LCD display.
- It shall allow adjustment of battery voltage and charging current.
- The device shall allow connection to grid and/or backup generator(s);
- The charging function of the inverter/charger shall include battery charging functionality and shall be wired in ways that
make use of the inverter-s battery charging functionality if the installation includes either mains power or a diesel
generator.
- Protections required: AC overload and load short circuit, overvoltage, overheating, and battery reverse polarity.
ISO 9001: Quality Management System
ISO 14001: Environment Management System
ISO 45001: Occupational Health and Safety
IEC 62941: Design and Manufacture of Crystalline Silicon
- The work includes all protection Breakers for batteries and Breakers for entrances and exits.
- Product warranty shall be 5 years

Deadline Submission date :15 August 2023 - 12 :00 PM

Documents

 Tender Notice