Supply and Delivery of One (1) Unit Inductively Tender - 10448302

Procurement Summary

Country: Philippines

Summary: Supply and Delivery of One (1) Unit Inductively Coupled Plasma-Optical Emission Spectrophotometer

Deadline: 31 Jan 2017

Posting Date: 18 Jan 2017

Other Information

Notice Type: Tender

TOT Ref.No.: 10448302

Document Ref. No.: EMB 13-2017-01-005

Competition: ICB

Financier: Self Financed

Purchaser Ownership: -

Tender Value: Refer Document

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

Inductively Coupled Plasma - Optical Emission Spectrophotometer
With the following specifications:
1. must have a thermo stated polychromator fully PC controlled
2. with RF Power from 750-1500 Watts of better complying with the FCC Standard
3. with a dimension of W: 800-1240mm; H: 590-1600mm; D: 740-1155mm
4. with 4-5 channels, fully PC controlled Peristaltic Pumps
5. with Charge Coupled or Charge Injection (CCD/CID) detector.
6. with Spectral Range of 160 nm -900 nm or better
7. with spectral resolution of 40000 wavelengths) with indication of preferred line for each element. Feature automatic identification of possible spectral interferences when selecting wavelengths for analysis and should have search mode for identification of unknown wavelengths. Software should have data export capability, online up gradation and help at any point in the software
15. with power requirement of 200-240 VAC (50-60 Hz)
16. with Nebulizer argon gas flow controlled using a mass-flow controller.
17. with no Chiller/re-circulator mounted to the instrument chassis and with original equipment parts from the manufacturer (OEM).
"18. with system supplied with computer controlled continuous & enhanced flow type
Hydride/vapor generation system in complete."
"19. with National Institute of Standards and Technology (NIST) traceable quality control standards of
Ag, Al, As, Ba, Ca, Cd, Co, Cr, Cs, Cu, Fe, Hg, Mg, Mn, Mo, Na, Ni, Pb, Se, Sr, Th, U, Zn, Zrof at
least 100 ml of 10 ppm and 100 ml of 10 ppb."
20. with complete site preparation, mounting and installation of the ICP-OES and complete and appropriate exhaust system suitable for the ICP -OES carried out by supplier.
21. with instrument training for two (2) laboratory personnel at manufacturers site and installation site in the instrument operation, maintenance and basic troubleshooting
22. with Full onsite warranty which also covers the supply of spare parts and option of further warranty, from the date of installation.
23. with Supplier`s commitment to meet the supply of spare parts for at least seven to ten years of satisfactory operation, Service technician should be available at all times when instrument problem arises and necessary declaration in this regard should be provided.
24. with Instrument qualification services (IQ/OQ) providing initial and ongoing verification that meets regulatory requirement and with provided necessary certificates with this regard
Pre-bid Conference
DateTimeVenue
30-Jan-201710:00 AMEnvironmenral Management Bureau RXIII Conference Room Purok 5, Brgy. Ambago, Butuan City

Documents

 Tender Notice