SP-300 Potentiostat, Potentiostat/galvanostat board and a standard cell cable with... Tender

Procurement Summary

Country : USA

Summary : SP-300 Potentiostat, Potentiostat/galvanostat board and a standard cell cable with electrometer

Deadline : 07 May 2025

Other Information

Notice Type : Tender

TOT Ref.No.: 118433015

Document Ref. No. : RFQ371738

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Description

SP-300 Potentiostat, Potentiostat/galvanostat board and a standard cell cable with electrometer

Request for the exact or domestic equivalent multi-channel, modular design potentiostat/galvanostat/EIS analyzer based on a portable chassis is required. Needs to be capable of USB and ethernet communication. Needs the following operational modes: floating, grounded, counter electrode to ground, working electrode to ground. EIS experiment functionality from 10 micro-Hz to 7 MHz. No separate analyzer should be required. Both sine and multi-sine techniques need to be available. Current and voltage should be possible to be measured simultaneously, with compliance voltage of +/- 12 Volt and reference voltage adjustable between -10 to +10 volts, with same range between working and reference electrodes. Resolution must be programmable from 300 micro-volts down to 1 micro-volts. Needs to apply and measure currents from 1 pico-amp to 500 milli-amps, a current control resolution of 0.004% and accuracies to 0.1% of FSR. Should be possible to be interfaced with boosters of 1, 2, 4 or 10 Amps on the same chassis. Multi-amp boosters should be possible to be paired for higher currents. Should be expandable to include a linear scan generator for true analog waveforms, up to 1 MV/s with data aquisition rates as fast as 1 micro-second. Requires an ultra-low current option to +/- 100 femto-amps on 1 pico-amp range with greater than 10^14 ohms input impedance. Should be capable of switching control modes in under 5 microseconds, without adverse spiking of the current in the connected cell. Requires an external input for control of potential or current via external analog input from separate device. Needs to have at least nine user-selectable bandwidths for full stability control on channels. Analog filters (50 kHz, 1 kHz, 5 Hz) as well as digital filtering in software. Needs to be able to acquire data at 20 micro-second frequency. Needs to be capable of 2-5 terminal measur...
Active Contract Opportunity
Notice ID : RFQ371738
Related Notice
Department/Ind. Agency : ENERGY, DEPARTMENT OF
Sub-tier : ENERGY, DEPARTMENT OF
Office: ORNL UT-BATTELLE LLC-DOE CONTRACTOR
General Information
Contract Opportunity Type: Solicitation (Original)
Original Published Date: Apr 29, 2025 06:07 pm EDT
Original Date Offers Due: May 07, 2025 05:00 pm EDT
Inactive Policy: Manual
Original Inactive Date: May 10, 2025
Initiative: None

Classification
Original Set Aside:
Product Service Code: 6630 - CHEMICAL ANALYSIS INSTRUMENTS
NAICS Code: 334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance: Oak Ridge, TN 37830 USA

Documents

 Tender Notice

Attachment-A-Terms-and-Conditions-Purchase-Order-C.pdf

Attachment-B-Prime-Supplemental-Flowdown-Document.pdf

Attachment-C-Reps-and-Certs-Abbreviated-02.pdf

Attachment-D-Bill-of-Materials.pdf

Request-for-Proposal-371738.pdf