Service Maintenance and Calibration of a Tear -Off Machine Tender, Czech Republic - 119253031

Procurement Summary

Country : Czech Republic

Summary : Service Maintenance and Calibration of a Tear -Off Machine

Deadline : 30 May 2025

Other Information

Notice Type : Tender

TOT Ref.No.: 119253031

Document Ref. No. : N006/25/V00015715

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Service maintenance and calibration 1 of the tear -off machine according to the more detailed specification listed in Annex 1.

a) Service maintenance including control and adjustment of the tear -off machine in the test laboratory.



The supplier must be able to service the machine and just just in the system

settings.



The values ​​of the strength measurement systemThe tear-off machine must meet the accuracy class 1 according to ČSN EN ISO 7500-1, chap. 7, table no.The system must meet the accuracy class 1 according to ČSN EN ISO 9513, Table 2, Metal Materials - Calibration of the Prettime Systems used to test by one -axis load.



b) calibration of the measuring device carried out by the supplier pursuant to Section 9 of the Metrology Act No. 505/1990, as amended, andDecree MIT No. 262/2000 Coll., As amended. Jitka Navratilova, tel. 973

443520



It is offered, not covered by international sanctions. The pattern of the honorary statement is attached to the tender documentation.

Calibration must be performed by an accredited calibration laboratory, which is accredited by the Czech Institute for Accreditation, o.p.s. according to ČSN EN ISO/IEC 17025. The service can be done in the formsubcontracting. Calibration must be performed as an accredited metrological performance.

Following the qualification requirements, do one of the following:

a) in the form of an affidavit that the calibration laboratory is accredited for calibration or:

b) a copy of the certificate of accreditation



deadlines forThe conclusion of the contract is set at 30 days. The deadline for conclusion of the contract begins on the day following the futile expiry of the deadline for submitting complaints of participants to the procedure of the awarding in the evaluation of the public contract.The conditions are set for 3 working days and are calculated from the date of public procurement. The deadline for filing co...
Current Status of ZP: Unconnected
Division into Parts: No
ZP Identifier on the Contracting Authority's Profile: P25V00015715
Type of Entry Procedure: Open Call
Procurement Specifications: Open Call
Kind of: 05/15/2025 12:46PM
code from CPV dial: 38500000
Name of CPV dial: Control azkosuba devices
Subject name: control azkosuba devices
text field for description of the filling point: Military equipment 551220, Štefanikova 53, 602 00 Brno
Nipez code list: 38500000-0. Nipez: Control and TestingDevices
Main Filling Place: Control and Testing Devices

Documents

 Tender Notice