Login
Login
Register
Complete Your Profile
Change Password
Request a Password Reset
Download Documents
Download Documents
Get Help to Participate in This Tender
Kuwait Petroleum Corporation has floated a tender for RFQ#2148761_REPAIR OF GC-10 TRAIN-D FEED PUMP MOTOR (10-GM-410A). The project location is Kuwait and the tender is closing on 21 May 2025. The tender notice number is event_62701, while the TOT Ref Number is 119348109. Bidders can have further information about the Tender and can request the complete Tender document by Registering on the site.
Procurement Summary
Country : Kuwait
Summary : RFQ#2148761_REPAIR OF GC-10 TRAIN-D FEED PUMP MOTOR (10-GM-410A)
Deadline : 21 May 2025
Other Information
Notice Type : Tender
TOT Ref.No.: 119348109
Document Ref. No. : event_62701
Financier : Self Financed
Purchaser Ownership : Public
Tender Value : Refer Document
Purchaser's Detail
Name :Login to see tender_details
Address : Login to see tender_details
Email : Login to see tender_details
Login to see detailsTender Details
SCOPE OF WORK FOR GC-10 TRAIND FEED PUMP 1)Transport the stator from site to works facility and return it to same site after repairs. 2)Remove all the existing windings from the slots. Cleaning of the Slots. Measure the coil data for fabricating new coils 3)Repair core damaged area, perform staggering if required and carryout the core loss test of the stator. 4) Perform rewinding of the stator winding using preformed diamond shaped coils . 5) Supply and install winding RTD if available in original . 6) Testing of the winding with Hi-pot and surge test for any inter turn short during mounting process . 7) Varnishing of the stator winding with VPI system using EPOxY resin suitable up to 13.8KV. 8) Perform curing under controlled condition in hot air oven upto 180 deg C. 9) Perform Electrical test on complete winding including winding resistance, insulation resistance, surge comparison test, HiPot test, inspection of temperature detector, tan delta test complying to relevant standard and submit report. 10) Apply overcoat antitracking varnish on the winding and interior of stator frame. 11) Repair the damaged bearing seat on shaft by metalising and remachining to require size. 11.1)Steam clean the rotor, apply antitracking varnish. 12) Perform dynamic balancing of rotor . 13) Replace the motor bearings with new (FAG, Germany ) 14) Perform the mechanical inspection of the parts and repair if required. 15) Perform assembly . 16) TEST AT RATED VOLTAGE 3300 VOLTS IN THERE WORKSHOP . ...
Documents
Procurement Documents for Kuwait
Access a comprehensive library of standard procurement documents specific to Kuwait. Here, you'll find all the essential forms, guidelines, and templates required for tender applications and submissions in Kuwait
Want To Bid in This Tender?
Get Local Agent Support in Kuwait and 60 More Countries.
View Tenders By
Sign in with Google