Request for Quotation 2019/005 New Backhoe Loader Tender - 32608625

Procurement Summary

Country: Canada

Summary: Request for Quotation 2019/005 New Backhoe Loader

Deadline: 23 May 2019

Posting Date: 30 Apr 2019

Other Information

Notice Type: Tender

TOT Ref.No.: 32608625

Document Ref. No.: 2019-005

Competition: ICB

Financier: Self Financed

Purchaser Ownership: -

Tender Value: Refer Document

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

Specifications Units Must Comply with the Following Specifications in All Aspects. Alternative Components, which Meet the Requirement of This Specification But Are Not Identified in the Specification, Must be Approved by the Purchaser. Yes No Basic Specifications Backhoe Shall have a Minimum Digging Depth of 14\'4 (4, 360 Mm) with Standard Stick and 17\' 11 (5, 442 Mm) with Extendible Stick. Turbocharged Engine Net Flywheel Horsepower Shall be at Least 93 Hp (69 Kw) According to Sae J1349 Engine Net Peak Power @ 1800 Rpm Shall be at Least 94 Hp (70Kw) According to Sae J1349 Machine to be Equipped with an Economy Control Function for Maximum Fuel Efficiency Unit Shall have a Maximum Overall Transport Height of 11 Ft 9 in (3, 577 Mm) with Standard Tires and Standard Stick. Unit Shall have a Maximum Overall Transport Height of 11 Ft 11 in (3, 631 Mm) with Standard Tires and Extendible Stick. Unit Shall have a Maximum Height to the Top of the Canopy of 9 Ft 3 in (2, 819 Mm) with Standard Tires. Maximum Overall Transport Length Shall be 236 (7, 169 Mm) with Standard Tires and Standard Stick Maximum Overall Transport Length Shall be 236 (, 7175 Mm) with Standard Tires and Extendible Stick Unit Shall have a Maximum Width of 77 (2, 322 Mm) with a General-Purpose Bucket. Unit Shall have a Minimum Wheelbase of 7\'3 (2, 200 Mm). Engine Engine Must Comply with U.S. Epa Tier 3 / Eu Stage Iii off Road Emission Requirements. Engine Shall have an Economy Mode to Help Maximize Fuel Efficiency, While Maintaining Backhoe Performance Turbocharged Engine Net Flywheel Horsepower Shall be at Least 93 Hp (69 Kw) @ 2200 Rpm According to Sae J1349. Turbocharged Engine Net Flywheel Horsepower Shall be at Least 94 Hp (70 Kw) @ 2200 Rpm According to Iso9249. Net Peak Torque at 1400 Rpm Shall be Not Less Than 294 Ft-Lb (398 N-M) with 46% Torque Rise. Engine Compartment Side Panels Shall have Standard Noise Reduction and Heat Control Insulation. Units Shall be Equipped with a Turbocharged, Four Cylinder, Direct Injection Diesel Engine with High Strength, Cast Iron Alloy Single Block Design for High Strength and Long Life. the Engine Shall have Three-Ring Pistons Made of Lightweight, Silicon/Aluminum Alloy for Strength and Maximum Thermal Conductivity. the Engine Shall have a Forged Chrome/Molybdenum-Steel Crankshaft with Salt Bath Nitro Carburized Pins and Journals. the Engine Shall have Front and Rear Crankshaft Oil Seals that Are Lip Type Viton and Ptfe Designs Featuring an Integral Dust Lip. the Engine Shall have Nitrided, Martensitic Chrome Silicon Steel Inlet Valves and Nitrided, Austenitic Chrome Manganese-Nickel Steel Exhaust Valves for Durability. the Engine Shall have a High Strength, Deep Skirt Cylinder Block that is a Cast Iron Alloy, Monobloc Design for Increased Strength and Long Life. the Engine Shall have a High Strength Cylinder Head that is a Cast Iron Alloy Construction...

Documents

 Tender Notice