PVDF Chemical Grade Piping Tender in USA - 2615344

Procurement Summary

Country: USA

Summary: PVDF Chemical Grade Piping

Deadline: 18 Mar 2015

Posting Date: 14 Mar 2015

Other Information

Notice Type: Tender

TOT Ref.No.: 2615344

Document Ref. No.: R15PS00342

Competition: ICB

Financier: Self Financed

Purchaser Ownership: -

Tender Value: Refer Document

CPV Classification

44162000 - Piping

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

Added: Mar 13, 2015 7:15 pm

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is R15PS00342 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-80. The associated North American Industrial Classification System (NAICS) code for this procurement is 326122 with a small business size standard of 500.00 employees.This requirement is a ( Small Business ) set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-03-18 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Yuma, AZ 85364
The DOI BOR Yuma Area Office requires the following items, Meet or Exceed, to the following:

LI 001: PVDF Piping - 1" (32mm)OD, 5m length, 16 bar (232 psi), Translucent (natural), 93% sulfuric acid process fluid, socket fusion, 46, EA;

LI 002: PVDF Elbow - 45 Degree, 1" (32mm)OD, 16 bar (232 psi), Translucent (natural), 93% sulfuric acid process fluid, socket fusion, 2, EA;

LI 003: PDVF Elbow - 90 Degree, 1" (32mm)OD, 16 bar (232 psi), Translucent (natural), 93% sulfuric acid process fluid, socket fusion, 55, EA;

LI 004: PDVF Coupling - 1" (32mm)OD, 16 bar (232 psi), Translucent (natural), 93% sulfuric acid process fluid, socket fusion, 48, EA;

LI 005: PDVF Flange Ring/Slip Flange - 1" (32mm)OD, 16 bar (232 psi), Translucent (natural), 93% sulfuric acid process fluid, socket fusion, 1, EA;

LI 006: PVDF Ball Valve - 1" Socket Fusion (32mm)OD, 16 bar (232 psi), Translucent (natural), 93% sulfuric acid process fluid, 5, EA;

LI 007: PVDF Diaphragm Valve - 1" Socket Fusion OD, 16 bar (232 psi), Translucent (natural), 93% sulfuric acid process fluid, 1, EA;

LI 008: PVDF Socket Male Adapter - 1" (32mm)OD, 16 bar (232 psi), Translucent (natural), 93% sulfuric acid process fluid, socket fusion, 3, EA;

LI 009: PVDF Tee - 1" (32mm)OD, 16 bar (232 psi), Translucent (natural), 93% sulfuric acid process fluid, socket fusion, 2, EA;
Solicitation and Buy Attachments
***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the Submit a Question feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.***
For this solicitation, DOI BOR Yuma Area Office intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOI BOR Yuma Area Office is taking this action in an effort to improve both vendor access and awareness of requests and the agency s ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at [email protected]. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or [email protected] of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive.
New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer s warranty.
Bid MUST be good for 30 calendar days after close of Buy.
Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination.
This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov.
The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.222-50, 52.223-18, 52.225-1, 52.225-13, 52.232-33. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.
Award will be made to the lowest responsive, responsible offeror who meets the Government s need.
Offeror shall include a completed copy of this provision with its offer or be registered at www.SAM.gov. After reviewing the SAM database information, the offeror certifies by submission of its quote that the representation and certifications currently posted electronically with regard to FAR 52.212-3. Offeror Representations and Certifications Commercial Items have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this RFQ), as of the date of its quote. Offerors wishing to incorporate their representation and certifications in the SAM database into their quote by reference shall affirmatively state their desire to do so.
This clause implements the temporary policy by OMB Policy Memorandum M-12-16, Providing Prompt Payment to Small Business Subcontractors, dated July 11, 2012. a) Upon receipt of accelerated payments from the Government, the contractor is required to make accelerated payments to small business subcontractors to the maximum extent practicable after receipt of a proper invoice and all proper documentation from the small business subcontractors. b) Include the substance of this clause, including this paragraph (b), in all subcontracts with small business concerns. (c) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act.
Payment requests must be submitted electronically through the U.S. Department of Treasury s Internet Payment Platform System (IPP). "Payment requests" means any request for contract financing payment or invoicing payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov. Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: copy of the invoice and courtesy copy to the Contract Specialist to [email protected]. The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in CCR) will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) within 3-5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email [email protected] or phone (866)973-3131. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.
Yuma, AZ 85364

85364

US
47 -- Pipe, tubing, hose & fittings

Documents

 Tender Notice