COMMERCE, DEPARTMENT OF | NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY has floated a tender for Notice of Intent - SRM 2241a Glass Units. The project location is USA and the tender is closing on 30 Jun 2025. The tender notice number is NOI_NB646020-25-01727, while the TOT Ref Number is 121005592. Bidders can have further information about the Tender and can request the complete Tender document by Registering on the site.

Expired Tender

Procurement Summary

Country : USA

Summary : Notice of Intent - SRM 2241a Glass Units

Deadline : 30 Jun 2025

Other Information

Notice Type : Tender

TOT Ref.No.: 121005592

Document Ref. No. : NOI_NB646020-25-01727

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Description

The National Institute of Standards and Technology (NIST) Acquisition Management Division intends to negotiate with Starna Cells, Inc., located in Atascadero, CA, on a sole source basis under the authority of FAR Subpart 13.106-1(b), soliciting from a single source, for SRM 2241a Glass Units.



Specific Requirements are as follows:



The Contractor shall deliver two hundred (200) glass substrates that meet the following minimum specifications:



Glass making specifications

The glass must have the following composition: The glass must be made at a high temperature of approximately but no lower than 1415 °C. The glass must be annealed to eliminate stress and strain as observed using polarized light Oxide weight %

SiO2 67.35

Na2O 6.95

B2O3 25.65

Cr2 O3 0.05

Cutting, polishing and finishing

Each glass unit must have Dimensions 10.0 mm +/- 0.1 mm by 10.0 mm +/- 0.1 mm by 1.65 mm +/- 0.05 mm. Each glass unit must have one of the 10 mm x 10 mm faces polished and the opposite face frosted. The polished face must be finished with a scratch-dig tolerance of 20-10. The polished face must be flat to 4 fringes at 633 nm. The frosted surface must be frosted to give 1 micron to 3-micron rms surface roughness (400 grit alumina sanding).Glass optical specifications

Measurement Conditions All emission specifications listed below must be evaluated using a Raman spectrometer system equipped with a continuous-wave 785 nm excitation laser. The system must be capable of measuring Raman/luminescence spectra down to at least 200 cm-1 from the excitation line with minimal background contribution ( Absolute Emission Intensity The absolute emission intensity values must match that of the original SRM 2241 units within 10% from 200 cm-1 to 3500 cm-1 Raman shift relative to 785 nm (797.5 nm to 1082.4 nm). Emission Spectrum The normalized emission spectrum of the glass units must match that of the original SRM 2241 units with...
Active Contract Opportunity
Notice ID : NOI_NB646020-25-01727
Related Notice
Department/Ind. Agency : COMMERCE, DEPARTMENT OF
Sub-tier : NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY
Office: DEPT OF COMMERCE NIST
General Information
Contract Opportunity Type: Special Notice (Original)
Original Published Date: Jun 16, 2025 02:50 pm MDT
Original Response Date: Jun 30, 2025 03:00 pm MDT
Inactive Policy: 15 days after response date
Original Inactive Date: Jul 15, 2025
Initiative: None

Classification
Original Set Aside:
Product Service Code: 9340 - GLASS FABRICATED MATERIALS
NAICS Code: 327215 - Glass Product Manufacturing Made of Purchased Glass

Place of Performance: Boulder, CO 80305 USA

Documents

 Tender Notice


Procurement Documents for USA

Access a comprehensive library of standard procurement documents specific to USA. Here, you'll find all the essential forms, guidelines, and templates required for tender applications and submissions in USA

Explore Procurement Documents for USA


Want To Bid in This Tender?

Get Local Agent Support in USA and 60 More Countries.

View All The Services


View Tenders By


Publish Tenders


Have Any Dispute With The Purchaser?