Invitation to Bid for Supply and Delivery of Goods Tender - 27284147

Procurement Summary

Country: Philippines

Summary: Invitation to Bid for Supply and Delivery of Goods (Shared Service Facility)

Deadline: 23 Oct 2018

Posting Date: 05 Oct 2018

Other Information

Notice Type: Tender

TOT Ref.No.: 27284147

Document Ref. No.: DTI8RO.REGRO.18-09283

Competition: ICB

Financier: Self Financed

Purchaser Ownership: -

Tender Value: Refer Document

CPV Classification

33793000 - Laboratory glassware
38437000 - Laboratory pipettes and accessories

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

Invitation to Bid for Supply and Delivery of Goods (Shared Service Facility)
INVITATION TO BID
INVITATION TO BID FOR SUPPLY AND DELIVERY OF GOODS
(SHARED SERVICE FACILITY)
1. The Department of Trade and Industry, Regional Office No. 8, through the R. A. 10964 GAA 2018 intends to apply the sum of THIRTEEN MILLION PESOS (Php13, 000, 000.00) being the Approved Budget for the Contract (ABC) to payments under the contract for SUPPLY AND DELIVERY OF GOODS (Shared Service Facility)/CONTRACT NO. 18-SSF 017. Bids received in excess of the ABC shall be automatically rejected at bid opening.
The Department of Trade and Industry, Regional Office No. 8, through the R. A. 10964 GAA 2018 intends to apply the sum of:
Lot Name/Identification/Number of Contract Approved Budget for the Contract
1 1 SET
FIBERGLASS 3D PRINTER + FUSED DEPOSITION MODELING (FDM) 3D PRINTER
Specifications:
1unit Fiberglass 3D Printer
Technology: Fused Filament Fabrication
Continuous Filament Fabrication
Process: Continuous Fiber Reinforced Plastics
Build Volume: 254mm x 254mm x 254 mm
Weight: 227kg
Machine Footprint: 1626mm x 864mm x 711 mm
Print Bed: Flatbed Kinematic coupling
Upgrade Available: Continuous Carbon Fiber, High Strength High Temperature, and Kevlar
Layer Height: 100um default, 200um maximum
Z Layer Resolution: 100I1/4m (Microns)
Infill: Closed Cell Infill: Multiple geometries available
Part Properties: Ultimate Tensile Strength: 590 MPa (19.0x ABS, 16.4x)
Max Flexural Stiffness: 22 GPa (10.7x ABS, 7.6x)
Power: 220VAC, 150W (2A peak)
Material Properties: Plastic Available: - Engineering Grade
Thermoplastic
- 1.4 GPa Tensile Modulus
- 36 MPa Tensile Stress at Yield
- 25 % Tensile Strain at Yield
- 30 MPa Tensile Stress at Break
- 58 % Tensile Strain at Break
- 81 Mpa Flexural Strength
- 2.9 Gpa Flexural Modulus
- 145AC Heat Deflection Temp
- 330(J/m) Izod Impact - notched
- 1.2 (g/cmA³) Density
Fibers Available: Fiberglass -Reinforced
Fiber Strength
- 590 MPa Tensile Strength
- 21 GPa Tensile Modulus
- 3.8% Tensile Strain at Break
- 210 Mpa Flexural Strength
- 22 Gpa Flexural Modulus
- 1.1 % Flexural Strain at Break
- 105AC Heat Deflection Temp
- 2600 J/m Izod Impact - notched
1.5 (g/cmA³) Density
Software
Supplied Software: CAD Software
Security: Two Factor Authentication, Organization Admin Access, Single Sign On
Productivity: Printer Fleet Management, Organization Admin Portal
Early Access Update: Early Access to New Design, Features and Printing, Capabilities
Features: Allows selective fiber reinforcement to 3D Printing
With Fiber Routing and Slicing Intelligence.
Features and Functionality: - Dual, Quick Change Extruders/Nozzles,
- Pause/Resume Prints
- Anodized Aluminum Unibody
Chassis
- Kinematically Coupled Build Platform
- Draft Blocking Enclosure
- Cloud-based Interface (Premise-based version available)
Machine Features:
Media Cartridge: Plastic Composite Filament
Continuous Composite Filament
Internal Part Geometry: Closed Cell Triangular Infill, Closed Cell Hexagonal Infill
Accessories Included:
3 Unit FFF quick-change nozzle
3 Unit CFF quick-change nozzle
1 Unit True Bed Build Plate
800 cc Filament Spool
50 cc Fiberglass
1x CAD Software
Consumables Included:
1 Spool 800cc Filament Spool
1 Spool 150cc Fiberglass CFF Spool
Special Condition:
Training and Installation: - 2-3 days onsite training for at least 5 personnel.
- Training will be provided by a certified trainer.
- Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on parts and after sales support.
1 unit FDM 3D Printer
Printer Technology: FDM (Fused Deposition Modeling)
Build Size: 280mm x 280mm x 250mm
Extruder Nozzle: Single Nozzle, 0.4 mm diameter
Temperature: 170-275 Degree
Layer Resolution: 0.05-0.3 mm
Connectivity: SD Card, USB Port
LCD Screen: TFT Touch Screen, Full Color, Multi language, User friendly
Print Speed: 20-100 mm/s
Platform Temp: Room Temperature to 100 degree Ultrabase Platform
Compatible Material: ABS, HIPS, PLA, Wood, Polyester, Nylon, Alloy
Filament diameter: 3 mm
Software Input/output format: CAD Software
Positioning accuracy: X/Y 0.0125mm, Z 0.002mm
Electrical: 220V
Host computer software: Compatible Software
Product Dimension: 66cm x 52cm x52cm
Resume Printing: Resume from Accident Power Loss
Frame: Full Metal Frame
Filament Sensor: Magnetic ball Head mounts
Package Inclusion: 1x 8GB SD Card, 1x Tool Kit, 1x 1kg Filament, 1x Spool Holder
3kVA UPS
Consumables Included: 10 Spools ABS Filament 1 kg / spool
Warranty: 12 Months parts and Service
Php1, 000, 000.00
2 1 UNIT
CO2 LASER CUTTER AND ENGRAVER
Specifications:
Laser Source: Digitally controlled, air-cooled CO2 laser tubes (fully modular, permanently aligned and field replaceable)
Engraving Area: At least 813mm x 457mm
Max. Material Thickness: At least 5.5in with table, 8in without table
Laser Wattage: 30 Watts
Intelligent Memory Capacity: up to 64 MB
Laser Dashboard Print Driver: allows control of all the laser's features from one interface
Air Assist: Attach to a compressor to direct a constant stream of air across the cutting surface.
Visible Red Dot Pointer: Visible laser beam for setting up projects to determine exactly where the laser will fire.
Relocatable Home: Movable home position feature
Operating Modes: Optimized raster, vector or combined modes.
Motion Control System: High-speed, continuous-loop, DC servo motors using linear and rotary encoder technology
X-Axis Bearings: Ground and polished stainless steel Never Wear Bearing System.
Belts: Advanced B-style Kevlar Belts.
Resolution: Up to 1200 dpi
Speed and Power Control: Computer or manually control speed. Vector color mapping links speed, power and focus to any RGB color.
Normal Sound Level: 59 db
Ventilation System: 350 - 400 CFM (595-680 m3/hr) external exhaust is required. output port, 4in diameter.
Print Interface: 10 Base-T Ethernet or USB Connection
Rotary Fixture: Allows cylindrical and spherical objects (Rotary attachment included)
Electrical Requirements: 220 volts, 50 or 60 Hz, single phase.
Computer Requirements: Intel Core i7, 64-Bit, 16 RAM, Operating System
- Windows 7/8/10
Materials Compatibility:
Engraving: Wood, Acrylic, Fabric, Glass, Coated Metals, Ceramic, Leather, Paper, Rubber, Anodized aluminum, Painted Metals, Board, Plastic, etc.
Cutting: Wood, Acrylic, Fabric, Leather, Paper, Matte Board, Fiberglass, wood veneer, plastic, etc.
Machine Features:
* Accupoint Motion Control system
* Accupoint High Speed Servo Motors
* Long Life Lenses Rated to 500 watts
* Long Life Steel bearings
* Motorized Table
* Integrated Vacuum and Cutting Table
* Radiance Higher Resolution Optics
* Memory in Machine
* Silent Cooling Fans
* Auto Focus
* 3D Engraving Mode
* Easy access drop down door
* Raster Vector Color Mapping
* Adjustable speed and Power on Fly
Software: Creativity Graphics and Image Editing
Compatibility: at least AI, PSD, PDF, JPG, PNG, SVG, DWG, DXF, EPS, TIFF, DOCX, PPT
User Control Software Features: Multiple machine settings, RGB, color set, machine full control, Photo transform for laser engraving 2D or 3D graphics software.
Special Features: Built-in content organizer, w/ bitmap to vector trace, Multicore support, complex script, QR code generator, photo editing, web design, knife tool, import legacy workspace, touch friendly, stylus support, vector previews.
Accessories Included:
1 Unit Air Assist Pump
1 Unit Air Compressor
1 Unit 2" (51mm) Lens
1 Unit Corel Draw
1 Unit Vector Grid Cutting Table
10 sheets Acrylic Sheets 24 x 12" Assorted colors and thickness
Special Condition
Training and Installation: -2-3-day onsite training for at least 5 personnel.
-Training will be provided by a certified trainer.
-Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on parts and after sales support Php1, 800, 000.00
3 1 UNIT
BENCHTOP MILLING MACHINES
Specifications:
Table Size: at least 18" x 6.3"
Table Slots: 3 Slots along X-Axis 3/8"
Travel: 10" x 6.25" x 10" (X, Y, Z)
T-Slot Width: 10 mm
T-Slot Center-to-Center Distance: 50 mm
Spindle Nose to Table: Minimum of 2" Maximum 12"
Spindle Center to Column: 6.5"
Max Workpiece: 150lbs Maximum
System Foot Print: 42" x 45" x 49"
System Weight: 450 lbs
Spindle Taper: R8
Spindle Construction: Dynamically balanced cartridge with spindle lock
Spindle Power: 3/4 hp (600W) Brushless DC Motor
Spindle Speed: 300 to 10, 000 RPM
Transmission: V-Belt Drive, 2 ratios
Motion Feed Rate: 135 IPM (X, Y), 110 IPM (Z)
Tapping: Thread Mill
Axis Drives: High Performance Polyphase Stepper Motors with Leadshine, Microstepping Drivers
Ballscrews: Rolled C7 Ball Screw with anti-backlash double ball nut
Control Operator Console: Complete spindle control, plus
*Spindle Lock-Out Key
*Coolant On/Off/Auto
Controller: Compatible control software
Additional Control Features: * Integrated DIN accessory port for integrating optional touch probe or tool setter.
* Prewired for optional 4th-axis
* Preconfigured for Electronic handwheel
* Has Remote E-Stop
Power Requirements: 220V, Single Phase
Machine Features:
* Cast iron frame and table, with hand scraped hydrodynamic ways and tapered adjustment gibs
* Low friction PTFE-filled acetyl bonded sliding surface.
* Expandable, Modular Design
* Unique Knock-down Design allows for installation in basement or other restricted spaces
Maintenance Capacities:
Coolant/Oiler Capacity: Complete spindle control, plus 7 gallons
Auto Oiler Capacity: 2.1 quarts
Manual Oiler Capacity: 0.25 quarts
Control Software:
* A versatile program for PC-based motion control
Features: -c Storage of up to 256 work offsets
-c Storage of over 200 tool length offsets
-c Graphical tool path simulation
-c G-code editor
-c MDI manual data input line
-c Selectable and programmable jog and step control
-c Handy programming wizards to automate simple programming tasks using parametric tool and feature definitions.
-c Active modal list
-c Feed/speed control override
-c Specialized control for probing, tool setting, tapping, and more.
Accessories Included:
1 Unit Full Sheet Metal Enclosure Kit:
- 10ga sheet metal, Powder Coated Finish, Dual Pivoting front doors with 23" x 24" opening, sliding side doors 14" x 20" opening, 1/4" polycarbonate doors.
1 Unit Powder Coated Sheet Metal Machine Stand
1 Set Flood coolant kit:
includes: Coolant reservoir tank, Coolant Pump Hose Kit, including necessary fittings and mounting brackets.
1 Pc. Chip Pan Kit
1 Set Cable Integration Kit: 3 pcs. - USB Extension Cables
1 pc. - 10 ft VGA Extension Cable
Controller preloaded with compatible software w/ mouse and Power Cable
Jog Shuttle: USB connected electronic hand wheel for intuitive and accurate positioning and manual control during cutting
17" Standard LCD Monitor w/ LED backlighting and VESA/FDMI Mount Compatible
1 pc. Compact waterproof mini keyboard
1 Set - Cutting Tool Starter Set #2
- Drills (TiN coated) - 1/16"-1/2" by 1/64" increment
- Drills (TiN coated) - #1 - #56
- Drills (TiN coated) - A - Z
- Spot Drills - 1/4" (x2), 3/8" (x2), 1/2"
- Carbide 2 Flute End Mill (TiAlN coated) - 1/8" (x2), 1/4" (x2), 3/8" (x2), 1/2"
- Carbide 4 Flute End Mill (TiAlN coated) - 1/8"(x2), 1/4" (x2), 3/8" (x2), 1/2"
- Multi-Purpose Dispenser Tool Cabinet
1 Set - 4" CNC Vise that can be mounted upright or on either side
58 pcs. Pro Quality Steel Clamp Kit:
Includes: T-nuts fit standard 5/8" T-slots, 1/2-13 Studs, Strap Clamps, and Flange Nuts
1 Set - TTS CNC Operator Set with Tool Assistant
- 1 Gallon Machine Oil
- 2pcs MS (Mild Steel) Plate
Special Condition:
Training and Installation: - 2-3 days onsite training for at least 5 personnel.
- Training will be provided by a certified trainer.
- Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on parts and after sales support Php1, 500, 000.00
4 1 UNIT
LARGE FORMAT PRINTER AND CUTTER (PRINTING & LABELLING MACHINE)
PRINT AND CUT SOLUTION (PRINTING AND LABELLING
MACHINE)
Printing modes:
*48 mA2/hr (517 ftA2/hr) - Billboard (2 pass)
*16 mA2/hr (174 ftA2/hr) - Outdoor Plus (6 pass)
*12 mA2/hr (129 ftA2/hr) - Indoor Quality (8 pass)
*10 mA2/hr (108 ftA2/hr) - Indoor High Quality (10 pass)
*6 mA2/hr (65 ftA2/hr) - Backlits, Textiles, and Canvas (16 pass)
*5 mA2/hr (54 ftA2/hr) - High Saturation Textiles (20 pass) "
Print resolution: Up to 1200 x 1200 dpi Margins: 5x5x5x5 mm
(0.2x0.2x0.2x0.2 in)
Ink types: Latex Inks
Ink cartridges: Black, cyan, light cyan, light magenta, magenta, yellow,
Latex Optimizer
Cartridge size: 775 ml
Printheads: 6 (2 cyan/black, 2 magenta/yellow, 1 light cyan/light magenta, 1 Latex Optimizer)
Color consistency: Average a‰ 1 dE2000, 95% of colors a‰ 2 dE2000"
Media:
* Handling: Roll feed; Take-up reel (optional); automatic cutter (for vinly, paper-based media, backlit polyester film)
*Media Types: Banners, selfadhesive vinyls, films, papers, wallcoverings, canvas, synthetics, (fabrics, mesh, textiles and any other porous materials require a liner)
*Roll size: 254 to 1371-mm (10 to 54-in in) rolls (580 to 1371-mm) rolls with full support
*Roll weight: 25 kg (55lb)
*Roll Diameter: 180 mm (7.1 in)
*Thickness: up to 0.5mm (19.7 mil)"
Applications:
Banners, Customizabel sizing, Displays, Exhibition and event graphics, Exterior signage, Floor graphics, Indoor posters, Interior decoration, Labels and Stickers, Light boxes - film, Light boxes - paper, POP/POS, posters, Vehicle graphics, Wall decals, Window graphics"
Connectivity: Interfaces (standard) Gigabit Ethernet (1000Base-T) Dimensions:
*Printer: 2307 x 840 x 1380 mm (91x33x54 in) Weight:
*Printer: 174 kg (384 lb)"
Package Inclusions: Latex printer, printheads, maintenance cartridge, printer stand, spindle, use maintenance kit, edge holders, quick reference guide, setup poster, power cords, with Desktop Computer and 5KVA AVR
Environmental Ranges:
*Operating temperature: 15 to 300C (59 to 860F)
*Operating Humidity: 20 to 80% RH (non-condensing)"
"Acoustic:
*Sound Pressure:54 dB(A) (printing); 38 dB(A) (ready);, 15dB(A) (sleep)
*Sound Power: 7.2 B(A) (printing); 5.5 B(A) (ready);, 3.5B(A) (sleep)" Power:
*Consumption: 2.2 kW(printing); 70 watts (ready); 2.5 watts (sleep) *Requirements: Input voltage (auto ranging) 200-240 V (+-10%) two
wires and PE; 50/60 Hz (+-3 Hz); two power cords; 3 A max per printer
power cord; 13 A max curing power cord"
Certification:
*Safety: IEC 60950-1+A1+A2 compliant; USA and Canada (CSA listed); EU (LVD and EN 60950-1 compliant); Russia, Belarus and
Kazakstan (EAC); Australia and New Zealand (RCM)
*Electromagnetic: Compliant with Class A requirments, including:USA
(FCC rules), Canada (ICES), EU (EMC Directive), Australia and New
Zealand (RCM), Japan (VCCI)
*Environmental: ENERGY STAR, WEE, RoHS (EU, China, Koreas, India, Ukraine, Turkey) REACH, EPEAT Bronze, OSHA, CE marking
compliant"
Warranty: One -year limited hardware warranty
Cutting:
*Cut type: Drag-knife with TurboCut and Tangential emulation modes
*Cut width: 135 cm (53.1 in)
*Cut speed: Up to 113 cm/sec (44 in/sec) diagonal
*Acceleration: Up to 3 G diagonal
*Accuracy: 0.2% of movement or 0.25 mm, (0.01 in) whichever is greater
*Repeatability: A+/-0.1 mm (0.004 in)
*Cut force: 0 to 400 grams of downforce, in 5-gram steps
*Cut thickness: 0.05 to 0.25 mm (0.002 to 0.01 in); 0.8 mm (0.03 in) with optional sandblast blade
*Workflow Technology: Opticcal Positioning System (OPOS) and barcode integration with Latex Printer
*Connectivity: Interfaces (standard) USB and Ethernet (LAN)
*Dimensions (w x d x h): Cutter 1750 x 680 x 1145 mm (68.9 x 26.8 x
45.1 in), Cutter (shipping) 1880 x 480 x 670 mm (74 x 18.9 x 26.4 in) *Weight: Cutter 48 kg (106 lb), Cutter (shipping) 69 kg (152 lb)
*Package Inclusions: Latex 54 Cutter, cutter stand, FlexiPrint and Cut RIP, Cutter Control software, quick reference guide, setup poster, documentation software, power cords, standard holder (1), standard
blades (2), cut-off knife (1), 3-in media flanges (set of 2)
*Warranty: One year
Php1, 500, 000.00
5 1 UNIT
DESKTOP VINYL CUTTER
Specifications:
Driving method: Drag knife with TurboCut and Tangential Emulation Modes
Cutting width: 135 cm (53 inch)
Dimensions: (68.9 (W) x 26.8 (D) x 45.1 (H) in.)
Acceptable tool: Special blade
Maximum cutting speed: Cuts at speeds up to 1131 mm/sec (44 ips) diagonal
Blade force: 30 - 350 gf
Mechanical resolution: 0.000492 in./step (0.0125 mm/step)
Software resolution: 0.000984 in./step (0.025 mm/step)
Distance accuracy (1): Error of less than A+/-0.2 % of distance travelled, or A+/-0.1 mm, whichever is greater
Repetition accuracy (1)(2): A+/-0.1 mm or less
Alignment accuracy for printing and cutting when loading printed material (1) (3): A+/-1 mm or less for movement distance of 210 mm or less in material-feed direction and movement distance of 170 mm or less in width direction (Excluding effects of printer and/or material)
Interface: USB interface (compliant with Universal Serial Bus Specification Revision 2.0 Full Speed, Connecting Multiple Units)
Re-plot memory: 4 MB (buffer size: 16 MB)
Power supply: Dedicated AC adapter
Input: AC 100 to 240 V A+/-10 % 50/60 Hz 1.7 A
Output: DC 24 V, 2.8 A
Power consumption: Approx. 30 W (including AC adapter)
Acoustic noise level during operation: 70 dB (A) or less (according to ISO 7779)
Acoustic noise level during standby: 40 dB (A) or less (according to ISO 7779)
Included items: - AC adapter, power cord, blade, blade holder, roller base, alignment tool, USB cable, Set Up guide
- 1 roll of sticker paper and 1 roll vinyl, 3kVA UPS
Special Condition:
Training and Installation: - 2-3 days onsite training
- Training will be provided by a certified trainer.
- Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on Main Unit and Heating Element
Php350, 000.00
6 1 UNIT
CNC WOOD ROUTER
Specifications:
Processing Area: 60" x 98" (1524mm x 2500mm)
Standard Gantry Area: 6" (150mm) / 7.5" (190mm) as standard with the option of 7.5"
Drive System: Rack and pinion drive system on X and Y axis. Precision ballscrew drive with preloaded ballnut and fully enclosed ball recirculation system on Z axis.
Positioning Speed: 700ipm
Power Requirements: 208-230V 3 Phase / 440-460V 3 Phase (Single Phase Optional)
XY Move Speed: Variable, max. 300- (7.62m) per minute
Z Move Speed: Variable, max. 180- (4.57m) per minute
XY Positioning Speed: Variable, max. 500- (12.7m) per minute
Z Positioning Speed: Variable, max. 240- (6.1m)
Step Resolution (Distance per step): 0.0006- (0.015mm)
Positional Repeatability: A+/-0.002- (0.05mm)
Linear Cutting Force: a‰ˆ50# at 1- (25mm) per second
X- and Y-Axis Drive System: Rack and Pinion
Electrical Power Requirements: 220V 20A for Controls & Spindle, Single Phase
Computer Requirements: At least Windows 7, dual core or higher, 8GB RAM, 1024 x 768 graphic display
Software:
Design Software Compatibility: CAD Software
Solid Machine Base: A rigid, welded steel frame, fitted with an aluminum deck
Smart Console: Full machine control
Dust Collection Pressure Foot - Bellow Seal:
The bellows seal works with the High Capacity or the Universal 5Y pressure foot to enhance extraction in high dust environments.
Dust Collection Pressure Foot - High Capacity Pumps and Blowers:
The High Capacity Pressure Foot provides an efficient method of dust and sward extraction to ensure a clean working environment.
Tool Length Sensor: - Vacuum hold down where the required cut parts are generally quite large
- An automatic tool length sensor which ensures accurate and consistent cut depths is fitted as standard on all AXYZ machines.
Accessories Included:
1 Set Router Bit Starter Kit
1/8 Tapered Ball Nose
1-1/4 Spoilboard Cutter
1/4" 1 Flute Straight
1/4" Solid Carbide
1/4" Solid Carbide
1/2" 2 Flute CT ST V
1" 60 Degree V
Super O 1/4x7/8 CEL
1 Set Fusion 360: 3D Modelling Software
1 Set Varve Pro: Machine control Software
1 Set Consumables: Acrylic sheet, MDF Wood and Plywood, 1pc 5- inch thick foam board
Special Condition:
Training and Installation: - 2-3 day(s) onsite training for at least 5 personnel.
- Training will be provided by a certified trainer.
- Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on parts and service Php1, 670, 000.00
7 1 UNIT
LATHE MACHINE
Specifications:
Centre height: 90mm
Maximum swing: 180mm
Swing over cross slide: 110mm
Distance between Centre: 300mm
Bed width: 100mm
Longitudinal travel: 280mm
Spindle taper: 3MT
Spindle bore: 21mm
Maximum tool size: 10mm
Range of spindle speeds: 0-1250 / 0-2500 rpm
Range of metric threads: 0.5 - 3mm
Range of imperial threads: 10 - 44 tpi
Tailstock taper: 2MT
Tailstock quill travel: 60mm
Top slide travel: 50mm
Cross slide travel: 75mm
Compound slide swivel: 45A
Chuck mounting: Flange fitting
Motor: 600w
Power supply: 220v
Special Condition:
Training and Installation: - 2-3 day(s) onsite training for at least 5 personnel.
- Training will be provided by a certified trainer.
- Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on parts and service Php100, 000.00
8 3 UNITS
DIGITAL EMBROIDERY MACHINE
Specifications:
Basic Features:
Adjustable Screen Brightness
Built-in Memory
Built-in Language: English
Display Type: 10.1 in built in high definition LCD Display, with more define icons and scrolling menu.
Needle Threading System: Automatic
Realistic Preview
ScreenSaver
USB
Stitch Selector Type: Touch Screen
Thread Sensor: Bobbin Sensor, Upper Thread Sensor
Thread Sensor On/Off Thread Tension: Manual
UL/CSA Listed Voltage: 220V
Connectivity: USB
Embroidering:
Adjustable Embroidery Speed Settings
Built-In Alphabet Designs
Built-In Alphabet Fonts: 199
Built-In Border Function
Built-In Designs: 699
Built-in Embroidery Lettering Alphabet Fonts: 37
Cap Frame Capability
Color Shuffling Function
Computer Connectivity
Curved Text on Screen Editing
Drag and Drop Editing
Embroidery Position Marker
Eyelet Threading System
Frame Designs - Shapes: 10
Frame Designs - Stiches: 14
Included Embroidery Hoops: 4" x 4", 5" x 7", 8" x 14", 1.5" x 2"
Maximum Embroidery Area: 14" x 8"
Maximum Embroidery Speed (spm): 1000
Monogramming Font Styles
My Custom Design Feature
Onscreen Automatic Density Adjustment
On-Screen Editing
On-Screen Help:
Pattern Rotating Increments: 0.1 Degree, 1 Degree, 10 Degrees, 90 Degrees
Print and Stitch Technology
Resume Function
Sewing Decorative Stitches with Embroidery Arm Attached
Space Reduction among Embroidery Alphabets
Speed Adjustment
Thread Wiper
Trial Position/Layout Function
Package Inclusion:
Standard Frame
Multineedle Series, 2.3" x 1.6" (SMALL)
Multineedle Series, 4" x 4" (MEDIUM)
Multi-needle Series, 5"x7" (LARGE )
Multi-needle Series, 8"x12" (X-TRA LARGE )
All Colors
Special Features:
- InnovEye 2 Technology with high speed background scanning - 5x faster.
- Optional use of Cap and Cylinder frames
- Industry First my design Center offers new design capabilities all without PC.
- ScanImation Scanning Frame to scan line are or handwriting and convert into embroidery data.
- Color Sort Feature
- Smart stitch management with progress bar and direct stitch entry to pin-point the exact stitch
Special Condition:
Training and Installation: - 2-3 day(s) onsite training for at least 5 personnel.
- Training will be provided by a certified trainer.
Warranty: At least 12 Months on parts and service Php950, 000.00
9 1 UNIT
DIGITAL STORAGE OSCILLOSCOPE
Specifications:
Sample Rate:
-c Real-Time Sample: 1GS/s
-c Acquisition Modes: Normal
-c Normal data only: Peak Detect
-c High-frequency and random glitch capture: Average
-c Waveform Average, selectable 4, 8, 16, 32, 64, 128
Sample Rate Range:
-c 500MS/s--1GS/s Waveform Interpolation
-c (sin x)/x Record Length
-c 1 ms/div Range
-c 2ns/div to 40s/div, in a 2, 4, 8 sequence Vertical Resolution
-c 8-bit resolution, all channel sampled simultaneously
Position Range
-c 2mV/div to 10V/div Bandwidth
200MHz Rise Time at BNC(typical) - 1.8n Php90, 000.00
10 1 UNIT
SIGNAL GENERATOR
Specifications:
Outputs: Square wave, sine wave, triangle wave, TTL pulse, positive and negative ramp, pulse and skewed sine wave, AM, and sweep functions
Frequency Ranges: 0.1 Hz to 300 MHz, up/down range switchable in eight-decade steps
Main Output Amplitude (Two ranges):
0-20 Vp-p
200 mV to 20 Vp-p (open circuit)
100 mV to 10 Vp-p (50 ohm load)
0-0.2 Vp-p
20 mV to 2 Vp-p (open circuit)
10 mV to 1 Vp-p (50 ohm load) Php35, 000.00
11 1 UNIT
SPECTRUM ANALYZER
Specifications:
Frequency:
-c 2 Hz to 110 GHz
-c Maximum Analysis Bandwidth: 25 MHz to 1 GHz
-c Maximum Real-Time Bandwidth: 85 MHz to 510 MHz
Phase Noise @1 GHz (10 kHz offset): 136 dBc/Hz to -109 dBc/Hz Php100, 000.00
12 5 UNITS
DC POWER SUPPLY
Specifications:
OUTPUT MODE
Voltage: 0 ~ 30V
Current: 0 ~ 3A
Tracking Series Voltage: 0 ~ 60V
Tracking Parallel Current: 0 ~ 6A
CONSTANT VOLTAGE OPERATION (CH1, CH2)
Line Regulation: 0.01% + 3mv
Load Regulation: 0.01% + 3mv (rating current 3a)
Ripple & Noise: 1mvrms0, 5hz ~ 1mhz
Recovery Time: 100 s (50% load change, minimum load 0.5a)
Digital Meter:
3 digits 0.5" LED display
GPS-4303/3303 Out ON Accuracy + (0.5% of rdg + 2 digits)
GPS-4303/3303 Out OFF Accuracy + (0.5% of rdg + 8 digits)
GPS-2303 Accuracy + (0.5% of rdg + 2 digits)
POWER SOURCE
AC 100V/120V/220V +10%, 230V(+10%~-6%), 50/60Hz
Php150, 000.00
13 2 UNITS
SOLDERING STATION FOR SURFACE MOUNT WITH VACUUM PICKUP
Specifications:
Station Dimensions: 188 (W) x 127 (L) x 244 (D) mm
Power Input: AC 220 V / 60 Hz
Power Consumption: 500 W
Temperature Range: 100AC - 480AC
Heating Element Type: Metal Heating Core
Pump/Motor Type: Diaphragm Special-Purpose Lathe Pump
Air Capacity: 23 lines/min (Max)
KEY FEATURES:
* Microprocessor (ESD) Unit
* Digital Control and Display
* Built In Vacuum Pickup Tool
* Quick Heat Up Built in Air Flow Gauge
* Switchable between AC and AF
* Integrated Air Flow Gauge
* Built in Auto Cooling Process
PACKAGE INCLUSION
1 unit Main Station with Hot Air Gun
4 pcs Air Nozzles (1124, 1130i1/4Œ1196i1/4Œ1197)
1 pc Z003 Hot Air Gun Holder
1 pc Vacuum Suction Pen i1/4ˆFor 852A+) only
1 pc G001 IC Popper (for 852A++ only)
1 pc Power Cord
1 pc Instruction Manual Php60, 000.00
14 10 UNITS
LAPTOPS WITH DEDICATED VDRAM
Specifications:
Processor: IntelA(r) Corea„c i7-7700
Memory: 16GB DDR4 (8GB up to 32GB
Storage: 2.5" SATA 6Gb/s 1TB/7200RPM HDD
Graphics: NVIDIAA(r) GeForceA(r) (8GB GDDR5X VRAM)
OS: Win 10 Home Premium EM (SL)
Peripherals & Accessories:
1 x AC Adapter
1 x Power Cord
1 x Warranty Card
1 x User Manual
1 x Quick Start Guide
1 x Mouse Php800, 000.00
15 1 UNIT
INTERACTIVE PROJECTOR W/ DIGITAL DOCUMENT CAMERA
Specifications:
Displayable Colors: 1.07b
ANSI Lumens (Max.):3400
Contrast Ratio:
Max: 10, 000:1 High Contrast Mode
Native: 1, 800:1 Typical (Full On/Full Off)
Aspect Ratio:16:9
Native Resolution: Full 1080p HD (1920 x 1080)
Built-in Multimedia Speaker: 1x 10W
Throw Ratio: UST TR0.25
Screen Size - Diagonal: 81- - 100-
Projection Distance: 1.46 ft ~ 1.83 ft
Connectivity
Computer-In: 1 x D-Sub VGA-In
Computer-Out: 1 x D-Sub VGA-Out
USB: 1 x Mini USB-B
Audio Input: 1 x Audio-In (3.5mm)
Audio Output: 1 x Audio-Out (3.5mm)
HDMI Input: 2 x HDMI 1.4a
RS232 port: 1x RS232 (9-pin D-sub)
RJ45 port: 1x RJ45
Php150, 000.00
16 2 UNITS
LAPTOP (FOR ROBOTICS)
Specifications:
CPU: 2.9 GHz quad core Intel Core i7 processor
Graphics: Randeon Pro 50 with 4GB of GDDR5 memory & auto switching Intel HD Graphics 630
RAM: 16GB
SCREEN: 15.4- LED-backlit display
STORAGE: 1TB Solid State Drive Php130, 000.00
17 3 UNITS
ADOBE PHOTOSHOP, INDESIGN, ILLUSTRATOR
Specifications:
(Adobe Photoshop)
-c Release signature: CC 2018 (19.1.3.606)
-c Release date: April 2018
-c Compatibility: Windows/Mac
(Indesign)
-c Release signature: CC 2018 (13.1.0.76)
-c Release date: March 2018
-c Compatibility: Windows/Mac
(Illustrator)
-c Release signature: CC 2018 (22.1.0.312)
-c Release date: March 2018 Php86, 400.00
18 3 UNITS
CATIA V6 SOFTWARE
Specifications:
Compatible to OS requirements: (minimal required versions) Windows XP Professional (32 bit) Windows XP Professional x64 Edition Microsoft Windows Vista x86/Vista x64 Microsoft Windows 7 x64, Microsoft Windows 10 (32bit and 64bit) Php60, 450.00
19 3 UNITS
AUTODESK FUSION
Specifications:
Supports 2D and 3D data integration in a single environment
-c Supports a virtual representation
-c Supports direct edit and freeform modeling tools as well as multi-CAD translation capabilities
-c Should have mesh support in drawing views Php57, 150.00
20 1 UNIT
DUAL SIDED ID CARD PRINTER
Specifications:
-c 300 dpi (11.8 dots/mm) print resolution
-c Dye-sublimation thermal transfer direct to card
-c Full color or monochrome printing capacity
-c Single- or dual-sided printing
o monochrome single-sided 700 cards / hour
o single-sided CMYKO 195 cards/hour
o dual-sided CMYKOK 140 cards/hour
-c Edge-to-edge printing on standard CR-80 media Php180, 000.00
21 1 UNIT
VACUUM/VENTILATION SYSTEM, DUST COLLECTOR
Specifications:
-c Supports two stage dust filtration
Pre filters (Panel type)
Fine filters (Panel type)
-c Positive pressure type with minimum 4 (four) air changes per hour
-c Provision of motorized exhaust dampers with local control.
Php1, 011, 000.00
22 1 UNIT
HEAT PRESS MACHINE
Specifications:
-c Temperature range: 0 - 480AF (0 - 250AC)
-c Timer control: 0 - 999 seconds
-c Adjustable height: 13 1/2" to 17"
-c Wattage: 1250W
-c Power input: 110V or 220V
-c Cord length: 4.5'
-c Dimension (w/ platen press): 15 1/4"L x 15"W x 17"H
-c Eight Elements:
-c Platen Press (telfon-coated): 12" x 15" (38X30cm)
-c Hat/Cap Press: 6"x 3" (curved)
-c Mug Press #1: 2"-2.75" diameter (6OZ)
-c Mug Press #2: 3"-3.5" diameter (11OZ)
-c Mug Press #3: 12OZ latte mug (Cone)
-c Mug Press #4: 17OZ latte mug (Cone)
-c Plate Press #1: 5" max diameter
-c Plate Press #2: 6" max diameter
Packages Inclusion:
-c Press Machine, Printer, Accessories, Inkjet paper, 1doz mug Php40, 000.00
23 3 UNITS
POWER TOOLS SET WITH TOOL TROLLEY
Each set contains 1 piece each of the following:
o Jigsaw
o 20mm Stroke Length
o Power Input: 650W
o 7 position speed dial (0-3, 300 SPM)
o 4 orbital settings
o Tool free bevel adjustments at 00- 450
o Keyless blade
o Led light
o Soft grip handle and front grip area
o Straight Die Grinder
o Power Input: 500w
o Load speed: 30000 rpm
o Switch Type: Toggle
o Spindle Size: M15
o Collect Size: 6mm
o Cable Length: 3m
o Impact Drill
o Power Input: 700w
o Chuck Capacity: 1.5-13mm
o Drilling Capacity (wood): 32mm
o Drilling Capacity (metal): 13mm
o Drilling Capacity (concrete): 16mm
o Load Speed: 3, 000rpm
o Oscillating Power Multi Tool
o With attachments for sanding, grinding, cutting and scrapping
o 300watts
o 220V /60Hz
o Kit Box
o Depth/Cutting Guide
o Accessory adapter
o Flush cut blade
o Grout removal blade
o Carbide rasp blade
o Bi-metal plunge cut blade-metal/wood
o 15 sanding sheets
o Sanding plate
o HCS plunge cut blade
o Planer
o Power Input: 750W
o Load Speed: 16, 500rpm
o Planing Width: 82mm
o Planing Depth: 1.6mm
o Circular Saw
o Voltage: 220V
o Resistance: 0.453
o Input Watts: 1510W
o Load Speed: 5500rpm
o Blade/Disc Diameter: 185mm
o Cutting Depth:62mm
o Max Bevel: 45 degree
o Sander
o Power Input: 220v
o Load Speed: 16000rpm
o Compact Design
o Large orbit Size
o Palm Grip Design
o Large quality dust bag
o Cross cut Saw
o Ergonomic handle
o LxWxH: 18x5x63in
o Angle Grinder
o Input Watts: 580w
o Load Speed: 12000rpm
o Blade/Disc Diameter: 100mm
o Switch Type: Slide
o Spindle Thread: M10
o Cable Length: 2m
o Heat Blower Gun
o Power: 2000W
o Switch Control: 2 Stages
o Temp: 5-450C/90-600C
o Air Flow: 300/500 lpm
o Cable Length: 3m
o Nail Gun
o Nail Size Capacity: 10-50mm
o Nail Type: F15-F50
o Gauge: 18
o Dimension: 253x52x225mm
o Tool Trolley
o Number of Drawer: 6
o Wheeled
o LxWxH: 501x1016x985mm
o Type: Cabinet
o Load Capacity: 100kg Php600, 000.00
24 2 UNITS
TUNGSTEN INERT GAS (TIG) / ARC WELDING MACHINE (DUAL)
Specifications:
-c Power Voltage: 220V
-c Frequency: 50/60
-c Rated Input Current: 18.5
-c Output Current: 20-300amp
-c Rated Working Volt: 22
-c No-Load Volt: 54
-c Force Adjustment: 0-100
-c Duty Cycle: 60
-c No Load Loss: 60
-c Arcing Way: HF
-c Efficiency: 85
-c Power Factor
-c 0.93
-c Insulation Grade: F
-c Housing Protection Grade: IP21
-c Dimension: 505x203x375mm
-c Accessories:
i⤠Grounding Clamp and Cable
i⤠Electrode Holder and Cable
i⤠TIG Torch Gun
i⤠Ceramic Cup Nozzles
i⤠TIG Collets
i⤠Long Back Cup
i⤠Mark and Dark Glass
Instructional Materials Php80, 000.00
25 1 UNIT
AIR COMPRESSOR
Specifications
-10 HP
-2-stage
-22 amps/230 volts
-Three phase Baldor motor
-Maximum pressure is 175 psi
-Cast iron 4 cylinder V pump
-Bore and stroke (4-5/8'' [2] X 2-1/2'' [2] x 3'')
-120 gallon horizontal tank
-740 pump rpm
-33.5 piston displacement
-34.8 CFM @ 175 psi Php20, 000.00
26 8 UNITS
2.5 HP AIR-CONDITIONING UNITS
Specifications;
-c 2.5 HP Wall Mounted Split Type Inverter
-c Power Consumption: 1, 976W
-c EER: 13.4
-c Up to 60% Energy Savings
-c Eco-friendly R410A Refrigerant
-c Triple Action Filter (HD Filter, Plasma Ionizer, Vitamin C with Active Carbon Filter) Php480, 000.00
INCLUSIVE OF:
*All applicable taxes;
*Packaging, Freight and handling, delivery to Philippine Science High School-Eastern Visayas Campus (PSHS-EVC), Palo, Leyte
* Demonstration and Training on the use and operation of the SSF Equipment/Machine as indicated in the instruction manual by the supplier to PSHS-EVC, Palo Leyte;
* Provide manuals, hand-outs and other peripherals for each equipment/machine;
* Supervise the commissioning and testing of machines and equipment; and
* Equipment/machineries shall bear riveted engraved metal plate with painted over markings with the following text:
-œFABRICATION LABORATORY SHARED SERVICE FACILITY
PHILIPPINE SCIENCE HIGH SCHOOL-EASTERN VISAYAS CAMPUS (PSHS-EVC)
PROPERTY OF THE DEPARTMENT OF TRADE & INDUSTRY-
In two (2) designated areas. Text for painted over markings shall measure at least 1- in height. The dimensions of the engraved metal plates shall be at least 1-(W) x 3-(L).
TOTAL Php13, 000, 000.00
being the Approved Budget for the Contract (ABC) to payments under the contract for each lot. Bids received in excess of the ABC for each lot shall be automatically rejected at bid opening.
2. The Department of Trade and Industry, Regional Office No. 8 now invites bids for:
Lot Qty Unit Item Description Approved Budget for the Contract
1 1 set FIBERGLASS 3D PRINTER + FUSED DEPOSITION MODELING (FDM) 3D PRINTER
Specifications:
1unit Fiberglass 3D Printer
Technology: Fused Filament Fabrication
Continuous Filament Fabrication
Process: Continuous Fiber Reinforced Plastics
Build Volume: 254mm x 254mm x 254 mm
Weight: 227kg
Machine Footprint: 1626mm x 864mm x 711 mm
Print Bed: Flatbed Kinematic coupling
Upgrade Available: Continuous Carbon Fiber, High Strength High Temperature, and Kevlar
Layer Height: 100um default, 200um maximum
Z Layer Resolution: 100I1/4m (Microns)
Infill: Closed Cell Infill: Multiple geometries available
Part Properties: Ultimate Tensile Strength: 590 MPa (19.0x ABS, 16.4x)
Max Flexural Stiffness: 22 GPa (10.7x ABS, 7.6x)
Power: 220VAC, 150W (2A peak)
Material Properties: Plastic Available: - Engineering Grade
Thermoplastic
- 1.4 GPa Tensile Modulus
- 36 MPa Tensile Stress at Yield
- 25 % Tensile Strain at Yield
- 30 MPa Tensile Stress at Break
- 58 % Tensile Strain at Break
- 81 Mpa Flexural Strength
- 2.9 Gpa Flexural Modulus
- 145AC Heat Deflection Temp
- 330(J/m) Izod Impact - notched
- 1.2 (g/cmA³) Density
Fibers Available: Fiberglass -Reinforced
Fiber Strength
- 590 MPa Tensile Strength
- 21 GPa Tensile Modulus
- 3.8% Tensile Strain at Break
- 210 Mpa Flexural Strength
- 22 Gpa Flexural Modulus
- 1.1 % Flexural Strain at Break
- 105AC Heat Deflection Temp
- 2600 J/m Izod Impact - notched
1.5 (g/cmA³) Density
Software
Supplied Software: CAD Software
Security: Two Factor Authentication, Organization Admin Access, Single Sign On
Productivity: Printer Fleet Management, Organization Admin Portal
Early Access Update: Early Access to New Design, Features and Printing, Capabilities
Features: Allows selective fiber reinforcement to 3D Printing
With Fiber Routing and Slicing Intelligence.
Features and Functionality: - Dual, Quick Change Extruders/Nozzles,
- Pause/Resume Prints
- Anodized Aluminum Unibody
Chassis
- Kinematically Coupled Build Platform
- Draft Blocking Enclosure
- Cloud-based Interface (Premise-based version available)
Machine Features:
Media Cartridge: Plastic Composite Filament
Continuous Composite Filament
Internal Part Geometry: Closed Cell Triangular Infill, Closed Cell Hexagonal Infill
Accessories Included:
3 Unit FFF quick-change nozzle
3 Unit CFF quick-change nozzle
1 Unit True Bed Build Plate
800 cc Filament Spool
50 cc Fiberglass
1x CAD Software
Consumables Included:
1 Spool 800cc Filament Spool
1 Spool 150cc Fiberglass CFF Spool
Special Condition:
Training and Installation: - 2-3 days onsite training for at least 5 personnel.
- Training will be provided by a certified trainer.
- Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on parts and after sales support.
1 unit FDM 3D Printer
Printer Technology: FDM (Fused Deposition Modeling)
Build Size: 280mm x 280mm x 250mm
Extruder Nozzle: Single Nozzle, 0.4 mm diameter
Temperature: 170-275 Degree
Layer Resolution: 0.05-0.3 mm
Connectivity: SD Card, USB Port
LCD Screen: TFT Touch Screen, Full Color, Multi language, User friendly
Print Speed: 20-100 mm/s
Platform Temp: Room Temperature to 100 degree Ultrabase Platform
Compatible Material: ABS, HIPS, PLA, Wood, Polyester, Nylon, Alloy
Filament diameter: 3 mm
Software Input/output format: CAD Software
Positioning accuracy: X/Y 0.0125mm, Z 0.002mm
Electrical: 220V
Host computer software: Compatible Software
Product Dimension: 66cm x 52cm x52cm
Resume Printing: Resume from Accident Power Loss
Frame: Full Metal Frame
Filament Sensor: Magnetic ball Head mounts
Package Inclusion: 1x 8GB SD Card, 1x Tool Kit, 1x 1kg Filament, 1x Spool Holder
3kVA UPS
Consumables Included: 10 Spools ABS Filament 1 kg / spool
Warranty: 12 Months parts and Service
Php1, 000, 000.00
2 1 unit CO2 LASER CUTTER AND ENGRAVER
Specifications:
Laser Source: Digitally controlled, air-cooled CO2 laser tubes (fully modular, permanently aligned and field replaceable)
Engraving Area: At least 813mm x 457mm
Max. Material Thickness: At least 5.5in with table, 8in without table
Laser Wattage: 30 Watts
Intelligent Memory Capacity: up to 64 MB
Laser Dashboard Print Driver: allows control of all the laser's features from one interface
Air Assist: Attach to a compressor to direct a constant stream of air across the cutting surface.
Visible Red Dot Pointer: Visible laser beam for setting up projects to determine exactly where the laser will fire.
Relocatable Home: Movable home position feature
Operating Modes: Optimized raster, vector or combined modes.
Motion Control System: High-speed, continuous-loop, DC servo motors using linear and rotary encoder technology
X-Axis Bearings: Ground and polished stainless steel Never Wear Bearing System.
Belts: Advanced B-style Kevlar Belts.
Resolution: Up to 1200 dpi
Speed and Power Control: Computer or manually control speed. Vector color mapping links speed, power and focus to any RGB color.
Normal Sound Level: 59 db
Ventilation System: 350 - 400 CFM (595-680 m3/hr) external exhaust is required. output port, 4in diameter.
Print Interface: 10 Base-T Ethernet or USB Connection
Rotary Fixture: Allows cylindrical and spherical objects (Rotary attachment included)
Electrical Requirements: 220 volts, 50 or 60 Hz, single phase.
Computer Requirements: Intel Core i7, 64-Bit, 16 RAM, Operating System
- Windows 7/8/10
Materials Compatibility:
Engraving: Wood, Acrylic, Fabric, Glass, Coated Metals, Ceramic, Leather, Paper, Rubber, Anodized aluminum, Painted Metals, Board, Plastic, etc.
Cutting: Wood, Acrylic, Fabric, Leather, Paper, Matte Board, Fiberglass, wood veneer, plastic, etc.
Machine Features:
* Accupoint Motion Control system
* Accupoint High Speed Servo Motors
* Long Life Lenses Rated to 500 watts
* Long Life Steel bearings
* Motorized Table
* Integrated Vacuum and Cutting Table
* Radiance Higher Resolution Optics
* Memory in Machine
* Silent Cooling Fans
* Auto Focus
* 3D Engraving Mode
* Easy access drop down door
* Raster Vector Color Mapping
* Adjustable speed and Power on Fly
Software: Creativity Graphics and Image Editing
Compatibility: at least AI, PSD, PDF, JPG, PNG, SVG, DWG, DXF, EPS, TIFF, DOCX, PPT
User Control Software Features: Multiple machine settings, RGB, color set, machine full control, Photo transform for laser engraving 2D or 3D graphics software.
Special Features: Built-in content organizer, w/ bitmap to vector trace, Multicore support, complex script, QR code generator, photo editing, web design, knife tool, import legacy workspace, touch friendly, stylus support, vector previews.
Accessories Included:
1 Unit Air Assist Pump
1 Unit Air Compressor
1 Unit 2" (51mm) Lens
1 Unit Corel Draw
1 Unit Vector Grid Cutting Table
10 sheets Acrylic Sheets 24 x 12" Assorted colors and thickness
Special Condition
Training and Installation: -2-3-day onsite training for at least 5 personnel.
-Training will be provided by a certified trainer.
-Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on parts and after sales support Php1, 800, 000.00
3 1 unit BENCHTOP MILLING MACHINES
Specifications:
Table Size: at least 18" x 6.3"
Table Slots: 3 Slots along X-Axis 3/8"
Travel: 10" x 6.25" x 10" (X, Y, Z)
T-Slot Width: 10 mm
T-Slot Center-to-Center Distance: 50 mm
Spindle Nose to Table: Minimum of 2" Maximum 12"
Spindle Center to Column: 6.5"
Max Workpiece: 150lbs Maximum
System Foot Print: 42" x 45" x 49"
System Weight: 450 lbs
Spindle Taper: R8
Spindle Construction: Dynamically balanced cartridge with spindle lock
Spindle Power: 3/4 hp (600W) Brushless DC Motor
Spindle Speed: 300 to 10, 000 RPM
Transmission: V-Belt Drive, 2 ratios
Motion Feed Rate: 135 IPM (X, Y), 110 IPM (Z)
Tapping: Thread Mill
Axis Drives: High Performance Polyphase Stepper Motors with Leadshine, Microstepping Drivers
Ballscrews: Rolled C7 Ball Screw with anti-backlash double ball nut
Control Operator Console: Complete spindle control, plus
*Spindle Lock-Out Key
*Coolant On/Off/Auto
Controller: Compatible control software
Additional Control Features: * Integrated DIN accessory port for integrating optional touch probe or tool setter.
* Prewired for optional 4th-axis
* Preconfigured for Electronic handwheel
* Has Remote E-Stop
Power Requirements: 220V, Single Phase
Machine Features:
* Cast iron frame and table, with hand scraped hydrodynamic ways and tapered adjustment gibs
* Low friction PTFE-filled acetyl bonded sliding surface.
* Expandable, Modular Design
* Unique Knock-down Design allows for installation in basement or other restricted spaces
Maintenance Capacities:
Coolant/Oiler Capacity: Complete spindle control, plus 7 gallons
Auto Oiler Capacity: 2.1 quarts
Manual Oiler Capacity: 0.25 quarts
Control Software:
* A versatile program for PC-based motion control
Features: -c Storage of up to 256 work offsets
-c Storage of over 200 tool length offsets
-c Graphical tool path simulation
-c G-code editor
-c MDI manual data input line
-c Selectable and programmable jog and step control
-c Handy programming wizards to automate simple programming tasks using parametric tool and feature definitions.
-c Active modal list
-c Feed/speed control override
-c Specialized control for probing, tool setting, tapping, and more.
Accessories Included:
1 Unit Full Sheet Metal Enclosure Kit:
- 10ga sheet metal, Powder Coated Finish, Dual Pivoting front doors with 23" x 24" opening, sliding side doors 14" x 20" opening, 1/4" polycarbonate doors.
1 Unit Powder Coated Sheet Metal Machine Stand
1 Set Flood coolant kit:
includes: Coolant reservoir tank, Coolant Pump Hose Kit, including necessary fittings and mounting brackets.
1 Pc. Chip Pan Kit
1 Set Cable Integration Kit: 3 pcs. - USB Extension Cables
1 pc. - 10 ft VGA Extension Cable
Controller preloaded with compatible software w/ mouse and Power Cable
Jog Shuttle: USB connected electronic hand wheel for intuitive and accurate positioning and manual control during cutting
17" Standard LCD Monitor w/ LED backlighting and VESA/FDMI Mount Compatible
1 pc. Compact waterproof mini keyboard
1 Set - Cutting Tool Starter Set #2
- Drills (TiN coated) - 1/16"-1/2" by 1/64" increment
- Drills (TiN coated) - #1 - #56
- Drills (TiN coated) - A - Z
- Spot Drills - 1/4" (x2), 3/8" (x2), 1/2"
- Carbide 2 Flute End Mill (TiAlN coated) - 1/8" (x2), 1/4" (x2), 3/8" (x2), 1/2"
- Carbide 4 Flute End Mill (TiAlN coated) - 1/8"(x2), 1/4" (x2), 3/8" (x2), 1/2"
- Multi-Purpose Dispenser Tool Cabinet
1 Set - 4" CNC Vise that can be mounted upright or on either side
58 pcs. Pro Quality Steel Clamp Kit:
Includes: T-nuts fit standard 5/8" T-slots, 1/2-13 Studs, Strap Clamps, and Flange Nuts
1 Set - TTS CNC Operator Set with Tool Assistant
- 1 Gallon Machine Oil
- 2pcs MS (Mild Steel) Plate
Special Condition:
Training and Installation: - 2-3 days onsite training for at least 5 personnel.
- Training will be provided by a certified trainer.
- Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on parts and after sales support Php1, 500, 000.00
4 1 unit LARGE FORMAT PRINTER AND CUTTER (PRINTING & LABELLING MACHINE)
PRINT AND CUT SOLUTION (PRINTING AND LABELLING
MACHINE)
Printing modes:
*48 mA2/hr (517 ftA2/hr) - Billboard (2 pass)
*16 mA2/hr (174 ftA2/hr) - Outdoor Plus (6 pass)
*12 mA2/hr (129 ftA2/hr) - Indoor Quality (8 pass)
*10 mA2/hr (108 ftA2/hr) - Indoor High Quality (10 pass)
*6 mA2/hr (65 ftA2/hr) - Backlits, Textiles, and Canvas (16 pass)
*5 mA2/hr (54 ftA2/hr) - High Saturation Textiles (20 pass) "
Print resolution: Up to 1200 x 1200 dpi Margins: 5x5x5x5 mm
(0.2x0.2x0.2x0.2 in)
Ink types: Latex Inks
Ink cartridges: Black, cyan, light cyan, light magenta, magenta, yellow,
Latex Optimizer
Cartridge size: 775 ml
Printheads: 6 (2 cyan/black, 2 magenta/yellow, 1 light cyan/light magenta, 1 Latex Optimizer)
Color consistency: Average a‰ 1 dE2000, 95% of colors a‰ 2 dE2000"
Media:
* Handling: Roll feed; Take-up reel (optional); automatic cutter (for vinly, paper-based media, backlit polyester film)
*Media Types: Banners, selfadhesive vinyls, films, papers, wallcoverings, canvas, synthetics, (fabrics, mesh, textiles and any other porous materials require a liner)
*Roll size: 254 to 1371-mm (10 to 54-in in) rolls (580 to 1371-mm) rolls with full support
*Roll weight: 25 kg (55lb)
*Roll Diameter: 180 mm (7.1 in)
*Thickness: up to 0.5mm (19.7 mil)"
Applications:
Banners, Customizabel sizing, Displays, Exhibition and event graphics, Exterior signage, Floor graphics, Indoor posters, Interior decoration, Labels and Stickers, Light boxes - film, Light boxes - paper, POP/POS, posters, Vehicle graphics, Wall decals, Window graphics"
Connectivity: Interfaces (standard) Gigabit Ethernet (1000Base-T) Dimensions:
*Printer: 2307 x 840 x 1380 mm (91x33x54 in) Weight:
*Printer: 174 kg (384 lb)"
Package Inclusions: Latex printer, printheads, maintenance cartridge, printer stand, spindle, use maintenance kit, edge holders, quick reference guide, setup poster, power cords, with Desktop Computer and 5KVA AVR
Environmental Ranges:
*Operating temperature: 15 to 300C (59 to 860F)
*Operating Humidity: 20 to 80% RH (non-condensing)"
"Acoustic:
*Sound Pressure:54 dB(A) (printing); 38 dB(A) (ready);, 15dB(A) (sleep)
*Sound Power: 7.2 B(A) (printing); 5.5 B(A) (ready);, 3.5B(A) (sleep)" Power:
*Consumption: 2.2 kW(printing); 70 watts (ready); 2.5 watts (sleep) *Requirements: Input voltage (auto ranging) 200-240 V (+-10%) two
wires and PE; 50/60 Hz (+-3 Hz); two power cords; 3 A max per printer
power cord; 13 A max curing power cord"
Certification:
*Safety: IEC 60950-1+A1+A2 compliant; USA and Canada (CSA listed); EU (LVD and EN 60950-1 compliant); Russia, Belarus and
Kazakstan (EAC); Australia and New Zealand (RCM)
*Electromagnetic: Compliant with Class A requirments, including:USA
(FCC rules), Canada (ICES), EU (EMC Directive), Australia and New
Zealand (RCM), Japan (VCCI)
*Environmental: ENERGY STAR, WEE, RoHS (EU, China, Koreas, India, Ukraine, Turkey) REACH, EPEAT Bronze, OSHA, CE marking
compliant"
Warranty: One -year limited hardware warranty
Cutting:
*Cut type: Drag-knife with TurboCut and Tangential emulation modes
*Cut width: 135 cm (53.1 in)
*Cut speed: Up to 113 cm/sec (44 in/sec) diagonal
*Acceleration: Up to 3 G diagonal
*Accuracy: 0.2% of movement or 0.25 mm, (0.01 in) whichever is greater
*Repeatability: A+/-0.1 mm (0.004 in)
*Cut force: 0 to 400 grams of downforce, in 5-gram steps
*Cut thickness: 0.05 to 0.25 mm (0.002 to 0.01 in); 0.8 mm (0.03 in) with optional sandblast blade
*Workflow Technology: Opticcal Positioning System (OPOS) and barcode integration with Latex Printer
*Connectivity: Interfaces (standard) USB and Ethernet (LAN)
*Dimensions (w x d x h): Cutter 1750 x 680 x 1145 mm (68.9 x 26.8 x
45.1 in), Cutter (shipping) 1880 x 480 x 670 mm (74 x 18.9 x 26.4 in) *Weight: Cutter 48 kg (106 lb), Cutter (shipping) 69 kg (152 lb)
*Package Inclusions: Latex 54 Cutter, cutter stand, FlexiPrint and Cut RIP, Cutter Control software, quick reference guide, setup poster, documentation software, power cords, standard holder (1), standard
blades (2), cut-off knife (1), 3-in media flanges (set of 2)
*Warranty: One year Php1, 500, 000.00
5 1 units DESKTOP VINYL CUTTER
Specifications:
Driving method: Drag knife with TurboCut and Tangential Emulation Modes
Cutting width: 135 cm (53 inch)
Dimensions: (68.9 (W) x 26.8 (D) x 45.1 (H) in.)
Acceptable tool: Special blade
Maximum cutting speed: Cuts at speeds up to 1131 mm/sec (44 ips) diagonal
Blade force: 30 - 350 gf
Mechanical resolution: 0.000492 in./step (0.0125 mm/step)
Software resolution: 0.000984 in./step (0.025 mm/step)
Distance accuracy (1): Error of less than A+/-0.2 % of distance travelled, or A+/-0.1 mm, whichever is greater
Repetition accuracy (1)(2): A+/-0.1 mm or less
Alignment accuracy for printing and cutting when loading printed material (1) (3): A+/-1 mm or less for movement distance of 210 mm or less in material-feed direction and movement distance of 170 mm or less in width direction (Excluding effects of printer and/or material)
Interface: USB interface (compliant with Universal Serial Bus Specification Revision 2.0 Full Speed, Connecting Multiple Units)
Re-plot memory: 4 MB (buffer size: 16 MB)
Power supply: Dedicated AC adapter
Input: AC 100 to 240 V A+/-10 % 50/60 Hz 1.7 A
Output: DC 24 V, 2.8 A
Power consumption: Approx. 30 W (including AC adapter)
Acoustic noise level during operation: 70 dB (A) or less (according to ISO 7779)
Acoustic noise level during standby: 40 dB (A) or less (according to ISO 7779)
Included items: - AC adapter, power cord, blade, blade holder, roller base, alignment tool, USB cable, Set Up guide
- 1 roll of sticker paper and 1 roll vinyl, 3kVA UPS
Special Condition:
Training and Installation: - 2-3 days onsite training
- Training will be provided by a certified trainer.
- Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on Main Unit and Heating Element
Php350, 000.00
6 1 units CNC WOOD ROUTER
Specifications:
Processing Area: 60" x 98" (1524mm x 2500mm)
Standard Gantry Area: 6" (150mm) / 7.5" (190mm) as standard with the option of 7.5"
Drive System: Rack and pinion drive system on X and Y axis. Precision ballscrew drive with preloaded ballnut and fully enclosed ball recirculation system on Z axis.
Positioning Speed: 700ipm
Power Requirements: 208-230V 3 Phase / 440-460V 3 Phase (Single Phase Optional)
XY Move Speed: Variable, max. 300- (7.62m) per minute
Z Move Speed: Variable, max. 180- (4.57m) per minute
XY Positioning Speed: Variable, max. 500- (12.7m) per minute
Z Positioning Speed: Variable, max. 240- (6.1m)
Step Resolution (Distance per step): 0.0006- (0.015mm)
Positional Repeatability: A+/-0.002- (0.05mm)
Linear Cutting Force: a‰ˆ50# at 1- (25mm) per second
X- and Y-Axis Drive System: Rack and Pinion
Electrical Power Requirements: 220V 20A for Controls & Spindle, Single Phase
Computer Requirements: At least Windows 7, dual core or higher, 8GB RAM, 1024 x 768 graphic display
Software:
Design Software Compatibility: CAD Software
Solid Machine Base: A rigid, welded steel frame, fitted with an aluminum deck
Smart Console: Full machine control
Dust Collection Pressure Foot - Bellow Seal:
The bellows seal works with the High Capacity or the Universal 5Y pressure foot to enhance extraction in high dust environments.
Dust Collection Pressure Foot - High Capacity Pumps and Blowers:
The High Capacity Pressure Foot provides an efficient method of dust and sward extraction to ensure a clean working environment.
Tool Length Sensor: - Vacuum hold down where the required cut parts are generally quite large
- An automatic tool length sensor which ensures accurate and consistent cut depths is fitted as standard on all AXYZ machines.
Accessories Included:
1 Set Router Bit Starter Kit
1/8 Tapered Ball Nose
1-1/4 Spoilboard Cutter
1/4" 1 Flute Straight
1/4" Solid Carbide
1/4" Solid Carbide
1/2" 2 Flute CT ST V
1" 60 Degree V
Super O 1/4x7/8 CEL
1 Set Fusion 360: 3D Modelling Software
1 Set Varve Pro: Machine control Software
1 Set Consumables: Acrylic sheet, MDF Wood and Plywood, 1pc 5- inch thick foam board
Special Condition:
Training and Installation: - 2-3 day(s) onsite training for at least 5 personnel.
- Training will be provided by a certified trainer.
- Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on parts and service Php1, 670, 000.00
7 1 unit LATHE MACHINE
Specifications:
Centre height: 90mm
Maximum swing: 180mm
Swing over cross slide: 110mm
Distance between Centre: 300mm
Bed width: 100mm
Longitudinal travel: 280mm
Spindle taper: 3MT
Spindle bore: 21mm
Maximum tool size: 10mm
Range of spindle speeds: 0-1250 / 0-2500 rpm
Range of metric threads: 0.5 - 3mm
Range of imperial threads: 10 - 44 tpi
Tailstock taper: 2MT
Tailstock quill travel: 60mm
Top slide travel: 50mm
Cross slide travel: 75mm
Compound slide swivel: 45A
Chuck mounting: Flange fitting
Motor: 600w
Power supply: 220v
Special Condition:
Training and Installation: - 2-3 day(s) onsite training for at least 5 personnel.
- Training will be provided by a certified trainer.
- Training certificate from the manufacturer should be attached.
Warranty: At least 12 Months on parts and service Php100, 000.00
8 1 unit DIGITAL EMBROIDERY MACHINE
Specifications:
Basic Features:
Adjustable Screen Brightness
Built-in Memory
Built-in Language: English
Display Type: 10.1 in built in high definition LCD Display, with more define icons and scrolling menu.
Needle Threading System: Automatic
Realistic Preview
ScreenSaver
USB
Stitch Selector Type: Touch Screen
Thread Sensor: Bobbin Sensor, Upper Thread Sensor
Thread Sensor On/Off Thread Tension: Manual
UL/CSA Listed Voltage: 220V
Connectivity: USB
Embroidering:
Adjustable Embroidery Speed Settings
Built-In Alphabet Designs
Built-In Alphabet Fonts: 199
Built-In Border Function
Built-In Designs: 699
Built-in Embroidery Lettering Alphabet Fonts: 37
Cap Frame Capability
Color Shuffling Function
Computer Connectivity
Curved Text on Screen Editing
Drag and Drop Editing
Embroidery Position Marker
Eyelet Threading System
Frame Designs - Shapes: 10
Frame Designs - Stiches: 14
Included Embroidery Hoops: 4" x 4", 5" x 7", 8" x 14", 1.5" x 2"
Maximum Embroidery Area: 14" x 8"
Maximum Embroidery Speed (spm): 1000
Monogramming Font Styles
My Custom Design Feature
Onscreen Automatic Density Adjustment
On-Screen Editing
On-Screen Help:
Pattern Rotating Increments: 0.1 Degree, 1 Degree, 10 Degrees, 90 Degrees
Print and Stitch Technology
Resume Function
Sewing Decorative Stitches with Embroidery Arm Attached
Space Reduction among Embroidery Alphabets
Speed Adjustment
Thread Wiper
Trial Position/Layout Function
Package Inclusion:
Standard Frame
Multineedle Series, 2.3" x 1.6" (SMALL)
Multineedle Series, 4" x 4" (MEDIUM)
Multi-needle Series, 5"x7" (LARGE )
Multi-needle Series, 8"x12" (X-TRA LARGE )
All Colors
Special Features:
- InnovEye 2 Technology with high speed background scanning - 5x faster.
- Optional use of Cap and Cylinder frames
- Industry First my design Center offers new design capabilities all without PC.
- ScanImation Scanning Frame to scan line are or handwriting and convert into embroidery data.
- Color Sort Feature
- Smart stitch management with progress bar and direct stitch entry to pin-point the exact stitch
Special Condition:
Training and Installation: - 2-3 day(s) onsite training for at least 5 personnel.
- Training will be provided by a certified trainer.
Warranty: At least 12 Months on parts and service Php950, 000.00
9 3 units 3 UNITS
DIGITAL STORAGE OSCILLOSCOPE
Specifications:
Sample Rate:
-c Real-Time Sample: 1GS/s
-c Acquisition Modes: Normal
-c Normal data only: Peak Detect
-c High-frequency and random glitch capture: Average
-c Waveform Average, selectable 4, 8, 16, 32, 64, 128
Sample Rate Range:
-c 500MS/s--1GS/s Waveform Interpolation
-c (sin x)/x Record Length
-c 1 ms/div Range
-c 2ns/div to 40s/div, in a 2, 4, 8 sequence Vertical Resolution
-c 8-bit resolution, all channel sampled simultaneously
Position Range
-c 2mV/div to 10V/div Bandwidth
200MHz Rise Time at BNC(typical) - 1.8n Php90, 000.00
10 1 unit 1 UNIT
SIGNAL GENERATOR
Specifications:
Outputs: Square wave, sine wave, triangle wave, TTL pulse, positive and negative ramp, pulse and skewed sine wave, AM, and sweep functions
Frequency Ranges: 0.1 Hz to 300 MHz, up/down range switchable in eight-decade steps
Main Output Amplitude (Two ranges):
0-20 Vp-p
200 mV to 20 Vp-p (open

Documents

 Tender Notice