Procurement Summary
Country : USA
Summary : Floating Barge Separators
Deadline : 23 Jun 2025
Other Information
Notice Type : Tender
TOT Ref.No.: 120369734
Document Ref. No. : SPMYM325Q4S73
Financier : Self Financed
Purchaser Ownership : Public
Tender Value : Refer Document
Purchaser's Detail
Name :Login to see tender_details
Address : Login to see tender_details
Email : Login to see tender_details
Login to see detailsTender Details
Description
SOURCES SOUGHT SYNOPSIS (Floating Barge Separators)
The Defense Logistics Agency Maritime Portsmouth Naval Shipyard is issuing this sources sought and request for information as a means of conducting market research to identify parties having an interest in and the resources to support a requirement for the following:
Scope shall be to fabricate and deliver two (2) units of composite floating barge separators in accordance with the attached drawing and following requirements:
1. Separators shall be fabricated of a marine grade composite material that does not corrode in salt water, nor degrade from UV sunlight. All materials used shall be suitable for salt water marine applications.
2. Each unit shall be approximately 30ft long by 8ft wide by 6ft deep with a freeboard of 2-3ft.
3. Units shall be designed to berth a two story barge approximately 150ft long at the berth shown in the attached drawing with steel fender piles space approximately 20ft on center. The units shall be strong enough to resist all loads from the barge without cracking or breaking.
4. Each unit shall have a minimum of four (4) pad eyes for lifting the units with a crane, and shall have a lifting and rigging plan for lifting with a crane.
5. Each unit shall be delivered to Portsmouth Naval Shipyard, Kittery ME.
6. Each unit shall have a minimum of four (4) cleats measuring approximately 18 inches long.
7. Each unit shall have a retention system that holds the units in place while still allowing them to float up and down with the tide without damaging the fender piles, barge or units. The face engaging with the fender piles shall be battered to match the piles and prevent point loading.
8. The faces of the units shall have non-marking rubber fenders.
9. The top deck of each unit shall have a non-skid material suitable for personnel to walk on without slipping.
10. Shop drawin...
Active Contract Opportunity
Notice ID : SPMYM325Q4S73
Related Notice
Department/Ind. Agency : DEPT OF DEFENSE
Sub-tier : DEFENSE LOGISTICS AGENCY
Major Command : DLA MARITIME
Sub Command : DLA MARITIME SHIPYARDS
Office: DLA MARITIME - PORTSMOUTH
General Information
Contract Opportunity Type: Sources Sought (Original)
Original Published Date: Jun 04, 2025 09:45 am EDT
Original Response Date: Jun 23, 2025 12:00 am EDT
Inactive Policy: 15 days after response date
Original Inactive Date: Jul 08, 2025
Initiative: None
Classification
Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
Product Service Code: 2090 - MISCELLANEOUS SHIP AND MARINE EQUIPMENT
NAICS Code: 332312 - Fabricated Structural Metal Manufacturing
Place of Performance: Kittery, ME 03904 USA
Documents
Tender Notice