Contract notice: Primary-form acrylic polymers Tender, Poland - 42110849

Procurement Summary

Country : Poland

Summary : Contract notice: Primary-form acrylic polymers

Deadline : 14 May 2020

Other Information

Notice Type : Tender

TOT Ref.No.: 42110849

Document Ref. No. : 165325-2020

Competition : ICB

Financier : Self Financed

Purchaser Ownership : -

Tender Value : Refer Document

Purchaser's Detail

Purchaser : MIEJSKIE PRZEDSIĘBIORSTWO WODOCIĄGÓW I KANALIZACJI W LUBLINIE SP. Z O.O.
Office Name: Miejskie Przedsiębiorstwo Wodociągów i Kanalizacji w Lublinie Sp. z o.o.
Address: al. J. Piłsudskiego 15
Town: Lublin
Postal Code: 20-407
Contact Point: Aneta Spratek

Phone: +48 815324281
Fax: +48 815321910
Poland
Email :zampub@mpwik.lublin.pl
URL :www.mpwik.lublin.pl

Tender Details

Object of the contract
Primary-form acrylic polymers

Description: Contract notice: Primary-form acrylic polymers

Authority Type: Utilities entity
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union, with participation by GPA countries
Award criteria: The most economic tender
CPV code: 24542000, 24542000
CPV Description: Primary-form acrylic polymers.

Order by open tender for the selection and delivery of chemicals to support sludge dewatering processes at the Hajdow Wastewater Treatment Plant in Lublin

Reference Number: OZ / 241/16/20

The subject of the order is the selection and delivery of chemicals supporting sludge dewatering processes at the Hajdow Sewage Treatment Plant in Lublin during 24 monthsfrom the date of the contract or until the quantity is exhausted (260, 000 kg), whichever comes first. The subject of the order includes the selection and delivery of polyelectrolyte in powder state for drainage of digested sludge.

Main Site: Oczyszczalnia ściek-w Hajdow, Lublin, ul. Łagiewnicka 5, POLAND

The subject of the order is the selection and supply of chemicals to supportsludge dewatering processes at the Hajdow Sewage Treatment Plant in Lublin.

The subject of the contract includes the selection and delivery of powdered polyelectrolyte for dewatering digestate sludge.

1. Sludge properties:

Hydration 96.5 97.6% (average 96.8%)

Organic content 57 66.1% (average 59.8%)

Average 850 m / day

PH 6.5 7.5

The digestate is dewatered inBasic system on two decanter centrifuges from Gea Westfalia, type UCF 466-00-35 with a maximum capacity of up to 35 m / h. In the basic system, two centrifuges use one flocculant station with a maximum capacity of 4, 000 liters per hour. Number of centrifuges installed in the mechanical sludge dewatering station 4 pieces Number of flocculant stations 2 pieces

The equipment is in operationexpected amount of digestate: about 310 250 m / year (max. 10 858.75 Mg dm.). During the contract period, i.e. within 24 months, 620, 500 m (max. 21, 715.5 Mg DS)

2. Expected quantity of polyelectrolyte to be delivered: polyelectrolyte in powder state 260, 000 kg / 24 months.

3. The contractor sets the deadline for polyelectrolyte selection trials with Daniel Wojtowicz, stSpecialist of the Faculty of Heat and Power Engineering, tel. 081 531 26 18 or 695 655 708 between 7am - 3pm Monday to Friday.

4. The date of the test is set by e-mail. Mail to set the date: daniel.wojtowicz@mpwik.lublin.pl

5. Technical tests for the selection of polyelectrolyte will start 25 days before the deadline for submitting offers. Proposals of the deadline for the technical test of the polyelectric selectionlithium can begin to be submitted from the date of publication of the contract notice. The availability of the deadline for the polyelectrolyte selection test is determined by the order of applications. Due to the manner and time of testing the samples, it is determined that the last technical test for the selection of polyelectrolyte will take place 10 days before the date of submission of offers.

6. The Employer enables the Contractor before carrying out a technical testlaboratory tests of digested sludge from the Hajdow Sewage Treatment Plant. The test can be performed in a laboratory located in the sewage treatment plant.

7. The Contractor will provide the Ordering Party with a chemical agent (polyelectrolyte) for the technical test in the amount necessary to carry out the test, however not more than 200 kg (active substance) in big-bag packaging or bags(10 25 kg) with a safety data sheet.

8. The duration of the technical test the Employer specifies 8 hours. In the event of equipment failure, which prevents the performance of the sample, the Employer may extend the duration of the sample and change the sampling hours provided that the minimum time intervals between hourly sampling (minimum 30 minutes) are observed. In this case, they do not changeapplicable rules regarding the set parameters of the device. / h digested sludge on one centrifuge indicated by the Employer.

Employerreserves that in the event of equipment failure during the test, the test will be continued on another centrifuge, which will be connected to the flocculant station to which the centrifuge was connected, on which the test was started.

9. The date of the technical test previously agreed by the Contractor and the Employer will be confirmed by the Contractor by e-mail 48 hours before its start. In the case of brato confirm the performance of the sample, the Employer will not allow its implementation.

Due to the limited number of characters that can be entered into the content of the announcement, other information on the description of the order is included in Volume I of the ToR IDW in point 4.

Not applicable

Not applicable

This procedure for the award of a public contract is conducted under an open tender in accordance with Act Pzp. Employer in accordance with art. 24aa of the PPL Act, will first evaluate the offers and then examine whether the Contractor whose offer has been assessed as the most advantageous, is not subject to exclusion and meets the conditions for participation in the procedure.

Contractors who demonstrate no grounds for exclusion from the award procedure may apply orders referred to in art. 24 paragraph 1 ustawy Pzp, subject to art. 133 section 4 of the Public Procurement Law, according to which in the procedure for awarding a sectoral contract, the Contractor is not subject to exclusion in the case referred to in Art. 24 paragraph 1 point 13 lit. d, and in the case referred to in art. 24 paragraph 1 point 14, if the person referred to in this provision has been convicted of an offense mentioned in art. 24 paragraph 1 point 13 lit. d.

About itContractors who demonstrate no grounds for exclusion from the contract award procedure as referred to in Art. 24 paragraph 5 of the Public Procurement Law in the scope of items 1) 2) and 4) 8).

In order to demonstrate the lack of grounds for exclusion from the contract award procedure and to confirm compliance with the conditions for participation in the procedure, Contractors are required to submitdocuments, in the event of joint application by two or more Contractors for the award of the contract, none of the Contractors may be subject to exclusion and for each of them must be shown:

1. Single European Order Document (EAT) submitted in electronic form with a qualified electronic signature and then together with the files constituting the offersę compressed into one archive file (ZIP) as a preliminary confirmation that the Contractor is not subject to exclusion and meets the conditions for participation in the procedure, drawn up and completed in accordance with the Regulation on the Single European Procurement Document to the extent consistent with Annex No. 2 to IDW.

2. Documents referred to in items 10.1.1 10.1.6 and 10.2 10.14 IDW.

To implementji the obligation referred to in art. 8a paragraph 5 of the Public Procurement Law, the Employer informs that the relevant provisions have been included in point 4.3.2. IDW.

An economic operator intending to take part in a public procurement procedure must have an ePUAP account. The contractor with an ePUAP account has access to the following forms: submission, modification, withdrawal of an offer or application, as well as to the form for communication.Technical and organizational requirements for sending and receiving electronic documents, electronic copies of documents and statements as well as information provided using them are described in the Regulations on using the mini Portal and the ePUAP Regulations. The maximum size of files sent via dedicated forms for: submitting, changing, withdrawing an offer or application, and dabout communication is 150 MB. If the file with the offer is larger than 150 MB, divide the offer and send it in two or three separate files. The date of submitting the offer, applications, notifications, electronic documents, statements or electronic copies of documents or statements and other information is the date of their submission to ePUAP.

The Contractor submits an offer forediting the Form to submit, change, withdraw an offer or application available on ePUAP and also made available on the miniPortal. The identifier of the procedure and the public key for a given procurement procedure are available on the "List of all proceedings" of the naminiPortal and on the website of the Employer together with the Terms of Reference. The offer should be sent to the Electronic Inboxmawiająca: / MPWiKLublin / SkrytkaESP, located on the ePUAP platform, at https://epuap.gov.pl/wsp/portal/ Terms of Reference.


Internet address (URL): www.mpwik.lublin.pl

Documents

 Tender Notice