Contract ID No. 18MBG004 - Procurement of various Tender - 23120666

Procurement Summary

Country: Philippines

Summary: Contract ID No. 18MBG004 - Procurement of various Testing Equipment and Upgrading of Materials Testing and Laboratories for 2nd Qtr. Of CY 2018 of Quality Assurance Section of DPWH South Cotabato 2n

Deadline: 29 May 2018

Posting Date: 09 May 2018

Other Information

Notice Type: Tender

TOT Ref.No.: 23120666

Document Ref. No.: 18MBG004

Competition: ICB

Financier: Self Financed

Purchaser Ownership: -

Tender Value: Refer Document

CPV Classification

38540000 - Machines and apparatus for testing and measuring

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

Contract ID No. 18MBG004 - Procurement of various Testing Equipment and Upgrading of Materials Testing and Laboratories for 2nd Qtr. Of CY 2018 of Quality Assurance Section of DPWH South Cotabato 2n
Republic of the Philippines
DEPARTMENT OF PUBLIC WORKS AND HIGHWAYS
SOUTH COTABATO 2ND
DISTRICT ENGINEERING OFFICE
REGIONAL OFFICE XII
Lagao, General Santos City
INVITATION TO BID
Contract ID No. 18MBG004 - Procurement of various Testing Equipment and Upgrading of Materials Testing and Laboratories for 2nd Qtr. Of CY 2018 of Quality Assurance Section of DPWH South Cotabato 2nd District Engineering Office
Invitation to Bid for Goods No. IBG-004, series of 2018
1. The Department of Public Works and Highways South Cotabato 2nd District Engineering Office, General Santos City through the FY-2018 RA 10964 Regular 2018 Current (SR2018-02-004474) intends to apply the sum of Sixteen Million 00/100 Pesos Only (P 16, 000, 000.00) ) being the Approved Budget for the Contract (ABC) to payments under the contract for each Items . Bids received in excess of the ABC for each item shall be automatically rejected at bid opening.
2. The Department of Public Works and Highways South Cotabato 2nd District Engineering Office, General Santos City now invites bids for Procurement of Laboratory Equipment
ITEM NO. UNIT ITEM DESCRIPTION QUANTITY
MAGNESIUM OXIDE CONTENT, SULFUR TRIOXIDE CONTENT AND INSOLUBLE RESIDUE DETERMINATION TESTS OF CEMENT:
1 pc Beaker, 1000 ml 6
2 pc Filter Funnel, with Wire Mesh and Clip 3
3 pc Volumetric Flask with Stopper, 250 ml 15
4 pc Volumetric Flask with Stopper, 500 ml 9
5 pc Volumetric Flask with Stopper, 1000 ml 9
6 pc Stirring Glass Rod, 6 mm diameter x300 mm long 6
7 pc Graduated Cylinder, 1000 ml 6
8 pc Bottle Wash, 1000 mL 9
9 pc Porcelain Casserole Dish, 150 ml 9
10 unit Adjustable Tirril Type Gas Burner 1
11 pc Dessicator, 210 mm diameter wih Silica (Dessicant) 3
12 box Filter Paper, Whattman 9
13 pc Porcelain Evaporating Dish, 100 ml 12
14 pc Armored Thermometer 3
15 pc Glass Pipette, 100 ml 6
16 unit Digital Hot Plate, 300x400 mm, aluminium alloy/stainless steel plate. 230 V, 50-60 Hz; 1
17 unit Analytical Balance, 210 capacity x 0.0001 g sensitivity 1
18 bottle Sodium Hydroxide, 1 kg 5
19 bottle Hydrochloric Acid, 2.5 L 5
20 bottle Methyl Red Indicator, 100 g 5
21 bottle Barium Chloride, BaCl2, 50 g 5
22 bottle Ammonium Hydroxide, NH4OH, 2.5 L 5
23 bottle Ammonium Phosphate, (NH4)2HPO4, 1 kg 5
24 bottle Ammonium Oxalate Solution, 1 kg 5
25 bottle Ammonium Nitrate, NH4OH, 500 g 3
26 set "LOSS ON IGNITION OF CEMENT AND BUILDING LIME: - Muffle furnace 1200AC maximum temperature., 230 V, 50-60 Hz, 1 ph, 10
Specifications:
*Maximum temperature: 1200AC
*Power: 4200 W
*Inside dimensions (lxwxh): 210x280x145 mm
*Overall dimensions: 510x650x650 mm
*Weight approx. : 70 kg
Accessories included
- Platinum crucible, 25 ml capacity (2 Pcs)
- Analytical Balance, 210 g capacity, 0.0001g sensitivity"
27 set AIR CONTENT OF FRESHLY MIXED MORTARS, DENSITY METHOD, ASTM C185, AASHTO T137: - Steel Mould, 88.1mm highx76.2mm inside diameter and is calibrated to hold 400A+/-1 ml of water at 23AC. Accessories included: 1) Chattaway spatula, pure nickel, 120mm long (1pc); 2)Glass Plate, 120 mm diameter (1pc); 3)Hardwood Temper, 12x25x150mm (1pc);
28 pc SPECIFIC GRAVITY/DENSITY OF CEMENT ASTM C188, AASHTO T113: - Le Chatelier Flask, 250 ml capacity flask and has a neck with graduated markings from 0 to 1 ml and from 18 to 24ml in 0.1 ml intervals with an accuracy of 0.05 ml Accessories included:
29 pc 1) Chattaway Spatula
30 pc 2) Water Bath, a consist temperature capable maintaining temp of 0.2AF (0.1AC) of the test
31 set "NORMAL CONSISTENCY OF HYDRAULIC CEMENT & TIME SETTING: - Vicamatic 2, Automatic electronic apparatus for setting time test, complete ASTM C191, AASHTO T131, cement mortar/complete with accessories: Initial Setting Time Needle 1mm diameter, mould and PC software Vicasoft, 110-240V, 50-60 Hz, 1ph; *Minimum penetrations rate: 10 seconds
*Automatic calculation of initial and final setting time at programmable penetration depth limits
*Power: 50 W
*Dimensions: 200x400x410mm (lxwxh) Accessories included: 1) Needle for final setting; 2) Cylindrical probe for Consistency Test; 3) Sieve Test (Brass) 8""x2"", No.20;"
32 pc Additional: - Needle for Final Setting
33 pc - Cylindrical probe for consistency test
34 set "SOUNDNESS OF PORTLAND CEMENT BY AUTOCLAVE EXPANSION, ASTM C490: - High pressure cement autoclave, 230 V, 50-60 Hz, 1 ph, ASTM C490, C151; Complete with pressure gauge, pressure regulator, temperature regulator, control switches, safety valve and specimen rack. Conforming to ISPELS procedure.
Specifications:
*Working pressure: 1950 A+/-2100kPa; *Max.Pressure :2500 kPa; *Safety valve calibrate to 2400 kPa ; *Working temp:219 AC; *Capacity :10 specimens 25x 25 x250 mm; *Heater: 2600 w; *Overall dimensions: 450x475x1080 m;
Accessories included:
- Two gang prism mould 25x25x250 mm complete with contact points.Gauge length 250mm.
- Contact points for moulds. Pack of 100
- Digital length comparator 12.5x0.001 mm with output for PC connection
- Trowel mixing (Rectangular)
- Trowel mixing (Triangular)
- Straight edge (Stainless), 12"", "
SOUNDNESS OF PORTLAND CEMENT BY AUTOCLAVE EXPANSION, ASTM C490:
Additional:
35 pc - Two gang prism mould 25x25x250 mm complete with contact points.Gauge length 250mm
COMPRESSIVE STRENGTH OF CEMENT MORTARS:
36 set "-Digital mortar mixer, 5L capacity complete with bowl, EN beater and open-type sand hopper. 5L capacity complete with mixing 230 V, 50-60 Hz, 1 ph: Features: *Planetary speeds: 62 and 125 rpm
*Beater speed: 140 and 285 rpm
*Bowl capacity: 5 litres
*Alphanumeric display 2 x 16 characters
*Blade/Planetary speeds adjustable from 30/13 to 380/165 rpm, depending on the mix consistency
*3-points bowl supporting system allowing precise adjustment of the gap between bowl and beater
*Continuously variable speed (VFD Variable frequency drive technology)
*Overall dimensions: 465x540x620 mm (lxdxh) Accessories included:
1) Open-type hopper;
2) Hard rubber scraper;
3) Reference sand, 32 bags, 1350 g each, total 43.2 kg;"
37 pc Additional: - Hard Rubber Scraper
38 set "- Motor operated flow table, conforming to ASTM C230, 230 V, 50 Hz, 1 ph. *Complete with: flow mould and tamper; Accessories included:
1) Flow caliper conformingo ASTM C230;
2) Trowel;
3) Digital Caliper; "
COMPRESSIVE STRENGTH OF CEMENT MORTARS:
39 set "- 500 kN Capacity, Pilot, Automatic Compact-Line compression/flexural machine, load measurement with high precision load cell. Features:
*Automatic test cycle. Correct test execution according to selected Standards, is continuously and automatically controlled.
*Dual user interface display and PC
*Accuracy Class 1 (EN) and Class A (ASTM) starting from 10% of full scale
*Special calibration starting from few kN available on request;
*Compatible with the new, intuitive and smart DATA MANAGER Software. Very easy to use, complete with many functions, totally flexible, open to network comunications.
*Adopt the latest ES Energy Saving technologies for reduction of power consumption and silent operation
*Double stage hydraulic pump with rapid approach:high throughput of accurate tests (up to 40 per hour)
*Soft platen-to-specimen contact and smooth load rate control from the very beginning of the ramp
*Storage of up to 10 test profiles for each channel for quick test start
" 1
"Specifications:
*230V, 50-60 Hz, 1 ph
*Load measurement: Load cell
*Class 1 range :50 kN/500 kN
*Platens diameter 165x 30 mm
*Hardness :55 HRC
*Ram Travel :50 mm
*Max vertical daylight :240 mm
*Horizontal daylight : 265 mm
Accessories:
- Compression device to test 50 mm and 2- mortar cubes to ASTM C109, mortar cubes to ASTM C109,
- Distance piece dia. 165x20 mm, Weight 4.7 kg"
40 set "FINENESS BY AIR PERMEABILITY TEST: - Blaine fineness (air permeability) apparatus to ASTM C204 and AASHTO T153; *It consists of a stainless steel cell, perforated disc and plunger. *U-tube glass manometer is fit to the steel stand. *Supplied complete with rubber aspirator, pack of filter paper and thermometer. Specifications: *Overall dimensions: 220x170x470 mm; *Weight approx.: 8 kg;
Accessories included:
- Manometer liquid, 250 ml bottle;
- Reference cement, EN/ASTM (Pack of 5 g)
- Glass thermometer -10AC to +50AC;" 1
41 pack Additional: - Reference cement, EN/ASTM (Pack of 5 g) 5
42 set "CEMENT CURING CABINET - Cement curing bench-type cabinet
Specifications:
*Capacity: 400 liters approx.
*Power rating: total 310 W
*Temperature control: Electronic system with digital display and keyboard to set the curing temperature
*Cooling system: refrigeration unit with hermetic piston compressor, loaded with HFC ecological refrigerant fluid
*Humidity saturation: obtained by a water evaporation system (no water nebuliser) consisting of a water collecting bath, immersed re-circulating pump and hydraulic circuit
*Internal temperature range min/max: 18/30AC
*Temperature accuracy: A+/-1AC
*Ambient temperature min/max: 18/28AC
*Internal humidity range: 95% A+/- 5% RH
*Inlet water temperature min/max: 5/36AC. The cabinet has to be connected to the water mains.
*Max number of shelves per each cell: 7 (3 included) with 70mm spacing between them
*Number of shelves included: 3 per each cell (12 in total)
Accessories included:
- Plastic pan 220x220x70 mm for water curing of three 40x40x160 mm cement specimens;" 1
43 set PACKAGED CEMENT TUBE SAMPLER ASTM C183, AASHTO T127; Used to sample cement from packages. Made of brass, it has an outside diameter of 32 mm and is 700 mm long. 2
44 set "PENETRATION TEST(Asphalt Cement)AASHTO T49, ASTM D5; - Digital electronic semi-automatic penetrometer with automatic controller complete with micrometer vertical adjustment and adjustable electronic timer of the fall time, according to EN 1426, ASTM D5, AASHTO T49. 230 V, 50-60 Hz, 1 ph
Technical Specifications:
*Penetrometer has 0.01 mm precision digital penetration measurement gauge, release button & automatic zeroing function.
*Compatible with thermostatically-controlled water with cooling unit system with temperature range from +15 to 30AC, A+/- 0.1 AC accuracy" 1
"Accessories:
- Penetrometer needle, 2.5 A+/- 0.05 g (Pack of 3)
- Sample cup for penetration below 40 mm, 55 mm diameter x35mm height (Pack of 6)
- Sample cup, 70 mm diameterx45mm height (Pack of 6)
- Glass transfer dish with support, 100mdiameter x100mm height
- Mirror with articulated holder for easy surface contact between needle & sample
- Digital circulation bath with cooling &conditioning vessel. 230V, 50-60 Hz, 1 Ph
- Thermometer, +19ACto 27AC range, 0.1AC grad, ASTM 17C
- Thermometer, -8AC to 32AC range, 0.1AC grad, ASTM 63C"
Additional:
45 pcs - Penetrometer needle, 2.5 A+/- 0.05 g (Pack of 3) 2
46 pcs - Sample cup for penetration below 40 mm, 55 mm diameter x 35 mm height (Pack of 6) 2
47 pcs - Sample cup, 70 mm diameter x 45 mm height (Pack of 6) 2
43 set PACKAGED CEMENT TUBE SAMPLER ASTM C183, AASHTO T127; Used to sample cement from packages. Made of brass, it has an outside diameter of 32 mm and is 700 mm long. 2
44 set "PENETRATION TEST(Asphalt Cement)AASHTO T49, ASTM D5; - Digital electronic semi-automatic penetrometer with automatic controller complete with micrometer vertical adjustment and adjustable electronic timer of the fall time, according to EN 1426, ASTM D5, AASHTO T49. 230 V, 50-60 Hz, 1 ph
Technical Specifications:
*Penetrometer has 0.01 mm precision digital penetration measurement gauge, release button & automatic zeroing function.
*Compatible with thermostatically-controlled water with cooling unit system with temperature range from +15 to 30AC, A+/- 0.1 AC accuracy" 1
"Accessories:
- Penetrometer needle, 2.5 A+/- 0.05 g (Pack of 3)
- Sample cup for penetration below 40 mm, 55 mm diameter x35mm height (Pack of 6)
- Sample cup, 70 mm diameterx45mm height (Pack of 6)
- Glass transfer dish with support, 100mdiameter x100mm height
- Mirror with articulated holder for easy surface contact between needle & sample
- Digital circulation bath with cooling &conditioning vessel. 230V, 50-60 Hz, 1 Ph
- Thermometer, +19ACto 27AC range, 0.1AC grad, ASTM 17C
- Thermometer, -8AC to 32AC range, 0.1AC grad, ASTM 63C"
Additional:
45 pcs - Penetrometer needle, 2.5 A+/- 0.05 g (Pack of 3) 2
46 pcs - Sample cup for penetration below 40 mm, 55 mm diameter x 35 mm height (Pack of 6) 2
47 pcs - Sample cup, 70 mm diameter x 45 mm height (Pack of 6) 2
48 set " DUCTILITY OF BITUMINOUS MATERIALS (AASHTO T51, ASTM D113); - Ductimeter Ductility testing machine.230 V, 50-60 Hz, 1 ph;
Technical Specifications
*Thermostatically controlled water bath temperature at 25A+/-0.2AC
*4 briquettes capacity, 1500 mm carriage travel, 5 to 100 mm/min adjustable testing speed.
*High carriage return speed of 500 mm/min for greater productivity
*Elongation measurement by encoder is read on display" 1
"Accessories:
- Briquette mould conforming to ASTM D6084, AASHTO T300 & EN 13589;
- Briquette mould conforming to ASTM D113 & AASHTO T51;
- Ductility mould plate for Briquette mould;
- Thermometer, -8AC to 32AC range, 0.1AC graduations, ASTM 63C;
- Water chiller, flow rate 6 litres/min, 2AC minimum temperature. 1200W, 230V, 50-60 Hz, Dimension : 450mm x 450mm x 825mm;
- Transparent machine cover;
- Spatula (Stainless) 8"";
- Spatula (Stainless) 4"";
- Glycerine, Local 2.5 liter
- Talc, 1 kilo"
Additional:
49 pcs - Briquette mould conforming to ASTM D6084, AASHTO T300 & EN 13589, 8
50 pcs -Briquette mould conforming to ASTM D113 & AASHTO T51 8
51 pcs -Ductility mould plate for Briquette Moulds 8
52 set "SPECIFIC GRAVITY (ASPHALT CEMENT) ASSHTO T228, ASTM D70 - Hubbard-Carmick Pyknometer 25 ml
Includes:
- Precision Balance, 1020g capacity, 0.001g sensitivity
- Water Bath, a consist temperature capable of maintaining the temperature within 0.2 F (0.1C) of the Test
- Thermometer, -8A to 32AC range, 0.1AC graduations, ASTM 63C" 1
53 set "EFFECT OF HEAT AND AIR AND LOSS ON HEATING OF OIL AND BITUMINOUS COMPOUND, ASTM D6, ASTM D1754; - TFOT Bitumen Oven, 220 V, 60 Hz, 1 ph. *Internal chamber made from stainless steel
*Door with double panel window
*Inside dimension : 330 x 330 x 330mm
*Outside diameter: 500 x 500 x 900mm
Accessories included:
- Rotating shelf with 9 containers dia. 55x35 mm
- Rotating shelf 250 mm diameter
- Loss on heat thermometer ASTM 13C, +155AC to +170AC, 0.5AC divisions. Conforming to all standards; " 1
SPOT TEST, AASHTO T 102;
54 pc Florence Flask, 50 ml; 9
55 pc Cork Stopper for Florence Flask, 50 ml; 9
56 pack Filter Paper (Whattman no. 50) 70 mm; 3
57 pc Bowl Mixing Aluminum; 9
58 pc Pipette 0.1 ml graduation, 10 ml capacity; 9
59 bottle Xylene, Chemical Pure, C8H10, 2.5 L 3
60 bottle Normal Heptane, C7H16, 2.5 L 3
61 pc Digital Balance, 0.01 g sensitivity 2
SOLUBILITY TEST, AASHTO T44;
set "- Filter flask 500 ml capacity.;
- Funnel for Gooch crucible;
- Gooch crucible, glazed inside and outside with the exception of outside bottom surface. The approximate dimensions shall be a diameter of 44mm at the top, tapering to 36 mm at the bottom, and a depth of 2mm ;
- Rubber ring for Gooch crucible;
- Filter discs, fiberglass, 25 mm diameter (Pack of 100)
- Erlenmeyer flask, 125 ml;" 2
62 pc - Dessicator, 200 mm dia. with vacuum pump attach. and plate; 1
63 pc - Oven Laboratory 260L capacity( minimum ) capable of maintaining temp. of 110A+/-5AC 1
64 bottle -Trichloroethylene, Tech. Grade, 2.5 L 5
65 set "FLASH POINT (Asphalt Cement), AASHTO T48, ASTM D92; - Cleveland flash tester, 230 V, 50-60 Hz; Consist of :
- Brass test cup mounted on an electric heater with temperature controller, Double line-fuse, Hot plate control system
- Thermometer -6AC to 40AC" 1
66 set "SAYBOLT VISCOSITY TEST (EMULSIFIED), ASTM D88, AASHTO T72; - Saybolt Two Tube digital viscometer .230 V, 50-60 Hz, 1 ph; This test is for taking an empirical measurement of the Saybolt viscosity of petroleum products at specified temperatures between 21.1 to 98.9AC (70 to 210AF).
- Saybolt thermometer 19 to 27AC, subdivision 0.1AC;
- Saybolt thermometer 34 to 42AC, subdivision 0.1AC; - Saybolt thermometer 49 to 57AC, subdivision 0.1AC;
- Saybolt thermometer 57 to 65AC, subdivision 0.1AC, - Saybolt thermometer 79 to 87AC, subdivision 0.1AC, 250 mm length;
- Saybolt thermometer 95 to 103AC, subdivision 0.1AC;
- Filter funnel with wire mesh and clip;
- Withdrawal tube; - Sieve Test (brass) 3""x2"" brass, No. 20 " 1
67 set "DISTILLATION OF CUT BACK ASPHALT, ASTM D402, AASHTO T78; Consist of :
- Distillation flask
- Condenser
- Adapter
- Shield
- Shield and flask support
- Electric heater with thermoregulator
- Cylinder receiver
- Thermometer, ASTM 8 C, -2AC to +400AC, subdivisions 1AC
Accessories:
- Crow receiver 100 ml capacity" 1
CEMENT MIXING, ASTM D244;
68 pcs -Sieve Test (brass) 3" dia brass, No. 80 3
69 pcs - Sieve Test (brass) 3 " dia brass, No. 14 3
70 pcs -Watch glass; 9
71 set "RESIDUE ON SIEVING OF BITUMINOUS EMULSIONS, ASTM D244; - Sieve no. 20 (850I1/4m wire sieve) cloth. Sieve Test (brass) 3""x2"" brass
- Pan and cover Sieve Test (brass) 3""x2"" brass
- Electronic balance 2000g 1 g resolution,
- Sodium Oleate Solution (2%) or distilled water as alternative.
- Wash bottle;" 1
72 pc WEIGHT PER GALLON OF EMULSIFIED ASPHALT, ASTM D244: - Weight per Gallon Cup, 83.2ml, stainless steel measure 1
STORAGE STABILITY OF ASPHALT EMULSIONS, ASTM D244:
73 pc 500 ml glass cylinders 3
74 pc Pipette, 50 ml 3
75 set "WATER CONTENT (EMULSIFIED ASPHALT) ASTM D244; - Water in bituminous materials test set (Dean-Stark), 230 V, 50-60 Hz, 1 ph.The set comprises:
- 10 ml glass still
- Glass receiver
- Glass condenser
- Electric Heater with Thermoregulator
- Power: 250 W
- Weight: 4 kg approximate" 1
76 set "FLASH POINT (CUTBACK ASPHALT), AASHTO T79; - Tag Open Cup Flash Point Tester. 230 V, 50-60 Hz, 1 ph, conforming to ASTM D1310, ASTM D3143,
Consist of : Electric furnace with electronic controller of heating power, flame rotating ignition device, glass cup, insulating cup, support and clamp for thermometer, gauge, stainless steel frame, double line fuse
Power :600W,
Dimension :250 x 170 x 400 mm
Accessories:
-Thermometer, ASTM 33C, range -38AC to +42AC;
-Thermometer, ASTM 9C, range -5AC to +110AC;
-Thermometer, ASTM 35C, range +90AC to +170AC; " 1
77 set "BULK SPECIFIC GRAVITY OF COMPACTED BITUMINOUS MIXES, AASHTO T166; - Specific gravity frame for asphalt, conforming to ASTM C127, 200 mm diameter x 200 mm high, 3.36 mm mesh size (No. 6 ASTM)
- Overall dimension : 400 x 650 x 1000 mm
Includes:
- Density basket, stainless steel;
- Wax melting pot, 230V, 50-60Hz, 1 pH;
- Wax, Controls, 1 kg
- Vernier caliper, 0 to 200 mm x 0.01 mm;
- Cradle;
- Electronic top loading balance, 30kg capacity, 0.5 g resolution " 1
78 Unit MARSHALL IMPACT AUTOMATIC COMPACTOR FOR 101.6MM DIAMETER. (4-) SPECIMENS. CE version with safety guards. 220 V, 60 Hz, 1 ph; Technical Specifications: *Power rating 800 W *Drop frequency (lows/min) 55 A+/- 5 *Tamping face dia. 98.5 mm *Rammer weight 4536 A+/- 9 g *Drop height 457 A+/- 3 mm *Overall dimensions 385x470x1867 mm *Weight approximate 150 kg 1
79 set "MARSHALL STABILITY TEST, ASTM D6926, ASTM D5581; - Marshall compression testing machine with motorized ram, two-column. Structure and adjustable crossbeam. Maximum capacity: 50 kN, complete with 50 kN capacity load ring, 0.001mm resolution, fitted with stem brake feature to hold the maximum reading. 230 V, 50 Hz, 1 ph. Clearance between columns: 270 mm. Upgradable to Digital Marshall compression tester.
Technical Specifications:
- Maximum capacity: 50 kN
- Test speed: 50.8 mm/min
- Ram travel: 120 mm
- Power Rating: 750 W
Accessories included:
- Digital circulating water bath, 28 liters capacity, 230 V, 50-60 Hz, 1 ph
- Outside dimension : 640 x 340 x 240 mm
- Stability mould for 4- diameter (101.6 mm) specimens
- Stability mould for 6- diameter (152.4 mm) specimens
- Flow meter" 1
80 set "QUANTITATIVE EXTRACTION OF BITUMEN CONFORMS ASTM D2172, AASHTO T164/A; -1500 g capacity digital centrifuge extractor, speed control up to 3600 rpm, complete with 100 filters discs. 230V, 50-60hz, 1 ph;
Technical Specifications:
- Speed control up to 3600 rpm at 50 or 60 Hz by AC drive (inverter)
- Electronic control and digital display
- CE version available with electromagnetic arrangement to prevent opening of the cover during rotation.
- The rotating unit is connected to the base by four calibrated springs, which assures perfect stability throughout the test. The cover is precisely machined and fitted with a solvent-resistant gasket to avoid leakages.
Accessories included:
- Mixing Pan, 24"" x 24"" x 3"" galvanized (5 sets)
- Hot Plate, 12"" x 12"" (2 sets)
- Graduated Cylinder/Beaker, 1000ml (10 sets)
- Ignition Dish
- Trichloroethlylene " 1
IMMERSION-COMPRESSION TEST FOR ASPHALT:
81 pc IRS (Index Retained Strength) Mould; 9
82 pc IRS (Index Retained Strength) Moulding Plunger; 9
83 set "MECHANICAL ANALYSIS OF EXTRACTED AGGREGATES, AASHTO T30; a. Set of sieves consist of the ff:
- 8"" dia, Sieve 2"", 1 1/2"", 1"", 3/4"", 1/2"", 3/8"", No.4, No.8, No.16, No. 30, No.50, No.100, No.200, Tyler, USA
b. Pan and cover, Tyler, USA (2 Pcs)
c.Wash sieve 8"" x 4"" No.200, Tyler, USA (2 Pcs)" 1
84 set "TESTING ON CONCRETE JOINT SEALER, ASTM D5167; -A laboratory melter designed to heat sealant in the lab with minimum effort. This melter incorporates automatic electronic temperature controls and gauges as well as ASTM oil bath agitation system
Technical Specifications: 1) Thermostatical controlled temperature; 2) Heat Transfer Oil Bath cCapacity Approximately 6 1/2 gallons
Accessories included: - Spatula
- Digital Caliper, 0-6inch range, accuracy of 0.001mm (1pc)
- Mold (1 pc)
- Tin Panel, 40 mm x 60 mm x 3.2 mm (1pc) brass or steel" 1
85 Unit ASTM/AASHTO FULLY AUTOMATIC PROGRAMMABLE, PROCTOR/CBR AUTOMATIC COMPACTOR ; -For 4" and 6" specimens. Rammer kit included. Safety doors system and see-through window included. 220 V, 60 Hz, 1 ph. ASTM D1557 | AASHTO T99 | AASHTO T180 TECHINICAL SPECIFICATIONS: *Mould/specimen diameter, 4- and 6- *Rammer face diameter, 50.8 mm. *Rammer weight, 2.495/4.535 kg *Rammer drop, 305 and 457 mm *Blow rate 25 blows/min approximate, CE protection Included *Power rating 650 W approximate *Overall dimensions (wxdxh) 457x455x1390 mm *Weight approximate: 130 kg 1
86 Unit 2000 KN WIZARD 2, SEMI- AUTOMATIC COMPACT-LINE GEN. COMPRESSION TESTER Util. compression tester, 2000 kN capacity, for cubes up to 150 mm and cylinders up to diameter 160 x 320 mm. 220 V, 60 Hz, 1 ph. Technical Specifications: *Capacity kN (lbf) 1500 (335, 000) 2000 (450, 000) 3000 (660, 000) *Max vertical daylight, 350mm (13.8") *Horizontal daylight, 340mm (13.4") *Max. piston travel, 50mm (2") *Platen dimensions, 216mm (8.5") *Platen surface hardness 55.5 HRC (600 HV) *Platens flatness toll, 0.03mm(0.0012") *Overall dimensions, 835mmx440mmx1090mm (32.9"x17.3"x 42.9") *Weight approximate, 525 kg 1
87 pc ATTACHMENT FLEXURAL 6" X 6" X 21", 1
88 Unit NOISE REDUCTION AND CE COMPLIANT SAFETY CABINET WITH DOOR OPENING SWITCH FOR LOS ANGELES MACHINE 1
89 unit ELECTROMECHANICAL SIEVE SHAKER Has a unique two dimentional operation: a horizontal, circular motion and a vertical, topping motion. This special action allows material particles to stratify and "seek" critical openings in the test media. The result is the most accurate and consistent particle analysis testing. TECHNICAL SPECIFICATIONS:. *Sieve Size 8" Diameter *Number of Sieves Full Height: 6 Sieves, Half Height: 13 Sieves *Power 230 V / 60 Hz *Testing Applications 2" down through 635 mesh (20 micron) *Oscillations per Minute 278 A+/-10 *Oscillations Displacement 1" x 0.75" 1
90 unit LARGE CAPACITY AGGREGATE SAMPLE SPLITTER Technical Specifications: *For aggregates up to 150 mm size *Adjustable openings from 12.5 mm with 12.5 mm increments *Clam shell hopper 28 dm3 (1 cu.ft) Capacity *Complete with two pans *Dimensions: Overall height 991 mm *Hopper size 737 mm long x 483 mm wide *Weight approximate: 50 kg 1
91 unit GAUGE DIGITAL MARKING(MM), -12.5MM TO +12.5MM *Unique precision marking gauge with digital display for the rapid determination of dry film thickness of road markings and similar coatings; *Measurements relative to the substrate or to the marking itself are possible ; *Optional measuring bridge for measurements over the whole width of the marking for representative measurements on wide road markings as well as for profiling cross-sections; *Digital display providing reliable measuring results within seconds; 1
92 set LIQUID LIMIT DEVICE WITH COUNTER WITH GROOVING TOOLS Comprises: removable brass cup, adjustable crank and cam mechanism, blow counter, and base. 3
FIELD DENSITY TEST
93 set -CONE SAND WITH PLATE DENSITY 6
94 set -JUG DENSITY (PLASTIC) 1 GALLON 6
Top Cone Threads into sand jug Button Cone Flanged to 6-1/2- diam. Valve Brass construction; controls sand flow into density hole Capacity 10 kg of Density Sand Weight 1.4 kg (3 lb) Accessories Field density plate; density sand, 50 lb (22.7 kg) bag
95 set MOULD COMPACTION, 6" With internal diameter of 4 in and a height of 4.584 in 6
96 set MOULD CBR, 6"x7", LOCAL; With internal diameter of 152.4 mm and a height of 177.8 mm 15
97 set MODIFIED COMPACTION RAMMER, 50.8 mm DIA., WEIGHT 4.54 kg, 18 in. drop 3
98 set ORGANIC IMPURITY BOTTLE (SET OF 6) 500ml, 6
99 bottle SODIUM SULFATE, NA2SO4, 250 g 10
100 set MOULD BRIQUETTE(BRASS), 3 GANG 2''x2''x2'' For handling and storing of aggregate and cement sample. Specifications: Design 3-gang, split-type mold *Construction Forge-bronzed, wide-flanged top & base *Mold Closure Mechanical, T-bolt screw clamp held in place by snap rings, *Allows uniform separation of mold *Dimensions 2- i.d. x 2- h x 2- wModel : 2- / 50 mm Cube 10
101 set MECHANICAL SPLITTER FOR SAND/FINE AGGREGATES To divide representative dry samples in to the required batch sizes for testing. Made from sheet steel. 1
102 pc SIEVE TEST (BRASS) 8" X 2" BRASS / 4877 NO. 100 3
103 pc SIEVE TEST (BRASS) 8" X 2" BRASS / 4881 NO. 200 3
104 pc BUCKET YIELD 1/2 cu.ft., STEEL, 5mm thick 3
105 pc BALANCE, TRIPLE BEAM, 2610 capacity X 0.1 sensitivity 3
BULK SPECIFIC GRAVITY OF COARSE AGGREGATES
106 pc - Specific Gravity Frame 1
107 pc - Density Basket, Stainless Steel 1
108 Unit - Electronic Top Loading Balance, 30kg capacity, 0.5 g resolution 1
109 set SLUMP TEST SET (CONE BASE AND ROD) Dimensions: 510 mm x 470 mm x 330 mm Weight: 7 kg Scoop Used for filling the slump cone Hopper Used for filling the slump cone. Made from composite material. Tamping Rod Made from stainless steel. 4
110 pcs STABILITY MOULD, 4" DIA. (101.6mm) specimens conforming ASTM D5581 12
111 Unit DIGITAL CALIPER VERNIER Maximum measurement 0-12" (0-300 mm) Measurement system inch/metric 1
112 Unit PORTABLE THERMO-HYGROMETER Technical Specifications: It provides readings with 98% precision in a very short time for both R.H. and temperature. Range: R.H. 10% to 95%; 0AC to 60 AC ;32AF to 140 AF Resolution: R.H. 0.1%; 0.1AC; 1AF Accuracy: R.H. A+/-2%; A+/-0.4AC ; A+/-1AF Battery type/life: 1x9 V/Approximate 100 hours of continuous use Dimensions: 185x82x45 mm Weight Approximate: 315 g 1
113 Unit BAROMETER/ALTIMETER 2
114 pcs TAMPER (NON-ABSORPTIVE) 1/2"x 1" x 5" 2
115 pcs MOISTURE CAN WITH COVER, 75 mm DIAMETER x 50 mm, ALUMINUM 30
116 set PUBLICATION (2017 EDITION) AASHTO 1
117 set WEIGHING SLOTS -Each set consisting of 1-pc Chrome Plated Brass, Plastic Casing, Calibration Certificate included. Metrological value within class M2 or M3 -Breakdown: 1000g, 500g, 200g, 100g (2pcs), 50g, 20g, 10g (2pcs), 5g, 2g (2pcs), 1g = 13pcs -With 1 pc- Cylindrical Stainless Test Weight with box, Weight:2kg, Metrological value within class M1 1
TERMS & CONDITIONS: - DELIVERY, FREIGHT & HANDLING - INSTALLATION - COMMISSIONING - 90 CALENDAR DAY DELIVERY - VAT INCLUSIVE - INTERNATIONAL BRAND - ITALY, USA, JAPAN ONLY
3. Bidding will be conducted through open competitive bidding procedures using a non-discretionary -œpass/fail- criterion as specified in the Implementing Rules and Regulations (IRR) of Republic Act (RA) 9184, otherwise known as the -œGovernment Procurement Reform Act-.
Bidding is restricted to Filipino citizens/sole proprietorships, partnerships, or organizations with at least sixty percent (60%) interest or outstanding capital stock belonging to citizens of the Philippines, and to citizens or organizations of a country the laws or regulations of which grant similar rights or privileges to Filipino citizens, pursuant to RA 5183.
4. Interested bidders may obtain further information from Conference Room, 2nd Floor, Department of Public Works and Highways South Cotabato 2nd District Engineering Office, Tindalo St. Balite, Brgy. Lagao, General Santos City and inspect the Bidding Documents at the address given below during 8:00am to 5:00pm.
A complete set of Bidding Documents may be acquired by interested Bidders on May 9, 2018 to May 29, 2018 from the address below and upon payment of the applicable fee for the Bidding Documents, pursuant to the latest Guidelines issued by the GPPB, in the amount of Twenty Five Thousand Pesos Only (P 25, 000.00).
It may also be downloaded free of charge from the website of the Department of Public Works and Highways (DPWH) and the website of the Philippine Government Electronic Procurement System (PhilGEPS), provided that Bidders shall pay the applicable fee for the Bidding Documents not later than the submission of their bids.
5. The Department of Public Works and Highways South Cotabato 2nd District Engineering Office, General Santos City will hold a Pre-Bid Conference on May 15, 2018 (1:30 PM) at Conference Room, 2nd Floor, Department of Public Works and Highways South Cotabato 2nd District Engineering Office, Tindalo St. Balite, Brgy. Lagao, General Santos City, which shall be open to prospective bidders.
6. Bids must be duly received by the BAC Secretariat at the address below on or before 10:00am of May 29, 2018 All Bids must be accompanied by a bid security in any of the acceptable forms and in the amount stated in ITB Clause18.
Bid opening shall be on 10:30am on May 29, 2018 at Conference Room, 2nd Floor, Department of Public Works and Highways South Cotabato 2nd District Engineering Office, Tindalo St. Balite, Brgy. Lagao, General Santos City. Bids will be opened in the presence of the Bidders- representatives who choose to attend at the address below. Late bids shall not be accepted.
7. The Department of Public Works and Highways South Cotabato 2nd District Engineering Office, General Santos City reserves the right to accept or reject any bid, to annul the bidding process, and to reject all bids at any time prior to contract award in accordance with Section 41 of RA 9184 and its IRR, without thereby incurring any liability to the affected bidder or bidders.
8. For further information, please refer to:
BAC CHAIRMAN: TEODY R. GALANG BAC Secretariat Head: MA. THERESA R. BARROSO
Engineer III Engr. III/Head, Procurement Unit
BAC Chairperson BAC Secretariat Head
Email address: galang teody@@dpwhnet.gov.ph Email address: [email protected]
Approved SGD) TEODY R. GALANG
Engineer III
BAC Chairperson
R12.11.6 LYV/ALYA/LASB/MTRB
Pre-bid Conference
DateTimeVenue
15/05/20181:30 PMConference Room 2nd Floor . Procurement Office DPWH South Cotabato 2nd District engineering Office, Tindalo St., Balite Lagao, General Santos City
Other Information
https://goo.gl/qvLXnH
Closing Date : 2018-05-29

Documents

 Tender Notice