BID - Proc. of TechVoc Equipment for Electronic Tender - 28615724

Procurement Summary

Country: Philippines

Summary: BID - Proc. of TechVoc Equipment for Electronic Course - DCS

Deadline: 11 Dec 2018

Posting Date: 21 Nov 2018

Other Information

Notice Type: Tender

TOT Ref.No.: 28615724

Document Ref. No.: 2018-11-321

Competition: ICB

Financier: Self Financed

Purchaser Ownership: -

Tender Value: Refer Document

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

BID - Proc. of TechVoc Equipment for Electronic Course - DCS
ITB No. 2018-11-321
Date: November 19, 2018
Republic of the Philippines
City of Manila
BIDS AND AWARDS COMMITTEE
INVITATION TO BID (ITB)
The City Government of Manila, through its Bids and Awards Committee (BAC), invites eligible suppliers/contractors to bid for the hereunder project:
Project : Procurement of TechVoc Equipment for Electronic Course
Requesting Office/End-user : Division of City Schools
Approved Budget for
the Contract (ABC) : Php20, 000, 000.00
Source of Fund : SEF - Other Machineries and Equipment
Delivery Period : Thirty (30) calendar days
Prospective eligible bidders must have completed within the last three (3) years Single Largest Completed Contract (SLCC) that is similar to the contract to be bid equivalent to at least fifty percent (50%) of the Approved Budget for the Contract (ABC).
All particulars relative to Eligibility Statement and Screening, Bid Security, Performance Security, Pre-Bid Conference, Evaluation of Bids, Post-qualification and Award of Contract shall be governed by the pertinent provisions of R.A. 9184 and its Revised Implementing Rules and Regulation (IRR).
Bidding will be conducted through open competitive bidding procedures using a non-discretionary -œpass/fail- criterion as specified in the Revised Implementing Rules and Regulations of R.A. 9184.
The complete schedule of activities is listed, as follows:
Activities Schedule - 2018
1. 1. Issuance of Bid Documents November 21 - December 11
2. Pre-bid Conference November 29 - 1:25 p.m.
3. Deadline for the issuance/Payment of bid documents December 11 - 9:00 a.m.
4. Bidding proper; opening of bid envelopes December 11 - 4:20 p.m.
Note: All bidding documents must be submitted on or before 1:00 p.m. on the date of the Opening of Bids. Bid Documents submitted after the deadline shall not be accepted.
A complete set of Bidding Documents and other detailed information may be acquired from the BAC Secretariat, City General Services Office, 4th Floor Rm. 442, Manila City Hall Building, A.J. Villegas St., Ermita, Manila. All prospective Bidders shall be charged a non-refundable fee for the Bidding Documents, pursuant to the latest Guidelines issued by the GPPB, in the amount of Twenty Five Thousand Pesos (Php25, 000.00)
The City Government of Manila reserves the right to accept or reject any bid, to annul the bidding process, and to reject any and all bids at any time prior to contract award, without thereby incurring any liability to the affected Bidder or Bidders.
For further information, please refer to:
Mr. FRANCIS F. YENKO
CGSO, Room 442, Manila City Hall Building
310-5318
ERICSON A. ALCOVENDAZ
City Administrator and
Chairperson, BAC
1 2 3 4 5 6
ITEM QTY./UNIT DESCRIPTION CEILING UNIT TOTAL
NO. PRICE PRICE PRICE
ELECTRONICS
1 2 units Hand Tools Set for Electronics 499, 674.00
Vernier Caliper
Adjustable Engineers Try square
Combination Gauge
Magnifier Desk Lamp
Stepdown Transformer
Anti-Static Strap
Adjustable drive Torque Angle Gauge Meter
SlimLine 14pc Combination Wrench Set
Precision Nipper Cutter
ESD Brush
Needle File Set
Anti-Static Stainless Steel Tweezer set
Desoldering Pump
Soldering Aid Tool kit
Wire Stripper
Solder Fume Extractor, Main Filter
ESD Green Table Mat 1m x 10m
Portable Hand Held Drill
Rectangular ESD Brush, Plastic
S/S Protactor
Ballpeen Hammer 1lb
Ballpeen Hammer 1 - 1/2lbs
Allen Wrench Key 1/8 - 1/2"
Allen Wrench key 3 - 12mm
Soldering Gun
Soldering Station
Hacksaw
Desoldering Station
Tin Snip
Plier 3 pcs/set
Wire Stripper
Bent Nose Plier 6"
Tool Box, Large
Screw Driver 6pcs/set
English Ruler 24"
2 8 units Portable Digital Multimeter 15, 138.50
Features : 3 1/2 digit display
- Capacitor, frequency and temperature measuring
- Max. test voltage up to 1000VDC and 750VAC
- Various kinds of function : auto power off, diode test, triode test, On/ Off buzzer
3 5 units Mixed Signal Oscilliscope 382, 985.00
Features : Support logic analyzer and oscilloscope
- 1G Sa/s sampling rate and 50GSa/s equivalent sampling rate
- 1024k recording length
- 7" wide screen 64K color TFT display
- USB-host for save and update
Channels : 2 channels oscilloscope + 16 channels logical analyser
Sampling rate : 1GSa/s
page 3 of 11
1 2 3 4 5 6
ITEM QTY./UNIT DESCRIPTION CEILING UNIT TOTAL
NO. PRICE PRICE PRICE
Equivalent sampling rate : 25Gsa/s
Display : Adjustable 16 gears with the progress bar
800 horizontal x 480 veritcal pixels
4 4 units DDS Function Generator 387, 753.60
Features : Two same function outputs
- Using Direct Digital Synthesis (DDS) Technology
- 1uHz-60MHz frequency range for main waveforms
- 100MHz equal-accuracy frequency counter
- Arbitrary setting of start and stop for frequency sweep output
- More than 50 kinds of output waveform (arbitrary is optional)
- 4.3" TFT colour display
- Standard USB (H), USB (D) and optional LAN interface
5 1 unit Color Television Receiver System Trainer 997, 984.00
TV Receiver
Broadcast System : PAL No B/ G.D/ K, I
Size of Screen : (atleast) 32" LED, Dynamic Contrast Ratio
Ratio Power Requirements : 220V/ 50 - 60Hz/ 1Ph
Antenna Impedance : 75 OHM
Channels :VHF Channel 1 - 11; UHF Channel 21 - 69
Sound System : Built-in speaker for Dynamic Hi-Fi sound
Fault System : Trainer system includes electronically
selectable fault system mounted on a panel display board
featuring the circuit block diagram silk screened onto it.
The faults when activated by the micro switch, illuminate a
LED located within the corresponding section of the circuit
block duagram. Any number of faults can be activated at the
same time. A LED display control allows the LEDs to be
switched off there by preventing the student from knowing
which faults have been activated. A reset control de-activates
the faults and returns the unit to normal operation
Circuit Board : Solid state system incorporating integrated
circuits and microprocessor chips
On Screen Indicator : System controls activate an on screen
indicator to show current channel, tuning frequency, volume
level, color level, brightness level and skip this features is very
useful for training as it provides a graphic representation of
control settings
Chassis : TV is mounted on a special chassis which exposes all
key circuit boards and parts for ease of work. Circuit boards
are protected by plexiglass panels which have test probe holes
to allow access for measurement tests
Courseware :
a) Factory Service Manual
b) Student job sheets, fault guide, wiring diagram
c) General book on television servicing and theory
6 1 unit Fire Alarm Training Kit 1, 711, 200.00
Includes : Siren, Bells, Smoke Detector, Gas Detector,
Temperature Detector, Motion Detector, Flood Detector
Panel System
With symbol or diagram printed on each panel
page 4 of 11
1 2 3 4 5 6
ITEM QTY./UNIT DESCRIPTION CEILING UNIT TOTAL
NO. PRICE PRICE PRICE
Connection points via safety sockets
Modules :
Fire Alarm Main Unit
Magnetic door
Flush Magnetic door
Shutter Magnetic door
Dust Magnetic door
Electromagnetic door : 12VDC
Emergency stop button
Bell button
Break Glass Fire Alarm
Motion Detector : 12VDC
Smoke Detector 12VDC
Gas Detector : 12VDC
Temperature Detector : 12VDC
Electromechanical Siren : 12VDC
Alarm bell : 12VDC
Strobe Light : 12VDC
Buzzer : 12VDC
Incandescent Lamp : 12VDC
Vertical Frame : High level Din standard A4 with 2 shelf;
Material Aluminum
7 1 unit HI-Fi Radio Trainer 961, 000.20
- Designed for theoretical/ practical study of the workings
of a mini component system player, as well as the operation
of DVD-format digital video signals, and digital audio
in CD format.
- The functional structure of the equipment enables
its internal composition to be observed, the various
signals involved in its operation analyzed by means of
a block diagram and faults introduced.
- Includes a mini Hi-Fi Component System player to
aid the student to learn diagnostic methods and how to
locate breakdowns.
General Specification :
- Operating Conditions : 0 to 45deg, 85% or less (RH)
- AC 240V, 60Hz, 1-Phase
- Signal Format : PAL/ NTSC
- Disk Player : DVD Video, CD Video, CD Audio
- Audio & Video output : Coaxial digital out, audio line out,
video line out
- Sound system : DTS, Dolby Digital
Includes :
- Fault simulator to introduce to the mini Hi-Fi
component system DVD & CD player
8 3 units PCB Drafting and Fabrication Set-Up 875, 723.00
- PCB Equipment setup is introduced which is an
assemblage of tools, chemicals, jigs, fixtures and
small Equipment which has a diy approach
- The setup takes the students from the circuit shcematic
stage to final PCB
page 5 of 11
1 2 3 4 5 6
ITEM QTY./UNIT DESCRIPTION CEILING UNIT TOTAL
NO. PRICE PRICE PRICE
- Supplies enough samples and materials along
with the setup to fabricate PCB's of at least 6" x 4" size,
coressponding to a class of 30 students with each student
making 2 PCB's
Technical Components :
1. PCB Design Kit
a. Set of transistors, diodes, IC's
b. Copper Clad Sheet cut to 6 x 4in
c. PCB Drafting Stickers
d. Plastic films cut to 7 x 5in
2. PCB Etching Machine and Etchents
a. Etching Tank
b. Etching Tray
c. Chemicals required for etching, thinning
d. Small tools required sponges, brushes, gloves
e. Water bath for washing after etching
3. PCB Inspection Station
a. Illuminated Workstation
b. Illuminated Magnifier PCB Checker
c. 10x Magnifier
d. Hole Dia checker 0.5 - 4mm
4. PCB Drilling Station with Stand
a. High speed motorized precision drilling machine
b. Small tools, drill bits, tweezers, cutters, pliers
5. Prototype Testing Board
a. Test Board
b. Regulator
c. Plastic parts container
d. Diodes
e. Resistor
f. General purpose IC
g. Capacitor
h. LED, Inductor
i. Pontentiometer
j. Transistor
k. Connecting wires
l. Bridge Rectifier
9 1 unit Power Electronics Training Kit with Advance Power Electronic Training Kit 1, 925, 660.50
- It allows the implimentation of theoritical-practical
courses for the study of power electronics
- The individual units of an experimental setup are
connected via 4mm safety sockets which are arranged
in large, synoptically graphical symbils and current
flow diagram
- The vertical arrangement of the experimental panels,
the experimental setup can be seen from a far distance
and can be adapted by step by step to the course of the lessons
Modules Included :
1. Transformer 45/ 90
page 6 of 11
1 2 3 4 5 6
ITEM QTY./UNIT DESCRIPTION CEILING UNIT TOTAL
NO. PRICE PRICE PRICE
2. Control Unit 6 Pulse
3. Fault Simulator Phase Control
4. Four Channels Isolation Amplifier
5. Control Unit 2 pulse
6. Thyristor and Turn Off Circuit
7. Control Unit PWM/ PFM
8. Reference Variable Generator
9. Trigger Point Limiter
10. IGBT
11. Single Phase Rectifier
12. Fuse
13. Power Diode
14. TRIAC
15. Capacitor Unit
16. Rectifier
17. MOSFET
18. Bulb Socket
19. Resistor Load
20. DC Power Supply
21. Thyristor
22. AC Voltmeter
23. AC Ammeter
24. DC Voltmeter
25. DC Ammeter
26. RLC Load
Moduels for Advanced Power Electronics Training Kit
1. Power SCR/ Diode Half Bridge
2. IGBT 4 units
3. Power SCR
4. Free Wheeling Diode
5. Darlington Transistor
6. Power Diode Half Brige
7. Inductive Load
8. Resistor and Capacitor Measuring
9. AC Power Supply
With Accessories :
1. U-Link
2. Safety U-Link
3. Safety connecting Lead
4. Vertical Frame
10 1 unit Video Phone Training System 1, 883, 230.60
Includes :
Cameras plus intercom units
Master TV Monitor plus intercom
Electronic Door Lock
All units are mounted on panels with connection terminals
A three level frame is included
11 1 unit Fundamental of Appliance Repair Trainer 1, 925, 536.80
Training Topics Include :
- Using meters for trouble shooting
- The importance of Power Factor
page 7 of 11
1 2 3 4 5 6
ITEM QTY./UNIT DESCRIPTION CEILING UNIT TOTAL
NO. PRICE PRICE PRICE
- Basic AC circuits examples
- Electriciy and Heat
- Determining the Length of Resistance Wire
- Incandescent Lamps
- Flourescent Lamps
- Starting Methods
- Swtiches in Lamps
- Servicing Lamps
- Electricity and Transmission of Power
- Transformers
- Servicing by Substitution
- Using Test Lamps
- Servicing with Test Instruments
- Voltage Tests
- Open Circuits
- Checking Line Voltages
- Testing Special Circuits
Accessories : Student Experimental Manual
Set of stackable Test Leads
12 2 units Digital Lab 228, 480.00
Specification:
1. Solderless breadboard
2. DC power supply
3. Function generator
4. Digital voltmeter
5. Universal counter
6. Two digits of 7 segment LED display
7. Four point tip/banana socket/BNC socket exchange adapters
8. Eight buffered LED display
9. Eight data switches
10. Two function switches
11. Two pulse switches
12. Dimensions : (atleast) 480L x 360W x 200H mm
13. Weight : (atleast) 4.2kg
13 1 unit Instructional device for Interactive Learning 723, 551.50
Brightness : 3000 ANSI Lumens (Short Throw)
Contrast ratio : 18000 : 1
Lamp Life : Mercury - Maximum 6000Hrs
Resolution : SVGA 800 x 600
Display Technology : TI DLP technology/ 0.55" SVGA
Image Size : 59 - 300in
Projection Distance : 0.5 - 2.5m
Throw ratio : 0.617 : 1
Power Supply : Universal AC 110 - 230V
Memory : 4GB
Graphics : Integrated Graphics
Storage : 1TB
Optical Drive : DVD RW
System Audio I/0, Output : 30 watts internal amplifier
Input: Microphone Input
page 8 of 11
1 2 3 4 5 6
ITEM QTY./UNIT DESCRIPTION CEILING UNIT TOTAL
NO. PRICE PRICE PRICE
External I/0, Ports : Video In, 6 USB Ports, Lineout, VGA Out
LAN : 1 x Gbps
Accessories : Strolley Bag, Interactive Pen, Remote Control
Wifi and Bluetooth
Image Processing Technology : Built In Screen Interactivity
Feature, with auto calibration and Multi Touch pen writing
14 5 units Workstation for Electronic Room 165, 045.00
- Laminated board w/ PVC edging, anti scratch
- Color : As per availability
- 6 sets of compartment w/ lock & handle, back to back
- Steel tubular : 1 x 1 x 2.0mm thick
- Powder coated paint
- 4 sets of foot leveler
- Collapsable frame, bolted support
- Atleast 4 sets of Universal Conv. Outlet 3-gang, 220V
15 30 units Laboratory Bench 8, 505.00
16 1 unit Lab Facilitator Workstation 65, 000.00
Size (H x W x L) : (atleast) 0.75 x 0.60 x 1.2m
Specs : Laminated countertop 1.8mm thickness
Laminated base compartment with open shelves
17 2 units Hanging Wall Unit 136, 028.00
Laminated particle board with fiberglass swing door
18 2 units Demo Station 220, 920.00
Size (H x xW x L) : (atleast) 0.90 x 0.60 x 1.8m
Specs : Laminated countertop 1.8mm thickness
Laminated base compartment with open shelves
Anti Static matting for safety and protection
Compartments with lock, Stainless handle
19 1 unit Display Bin 74, 816.00
Laminated Wood
20 1 unit Monitoring Device 267, 225.00
Features
- upto 10m face recognition
- Easy setup for remote viewing
- High resolution record/ playback
Technical Specifications
- Multi Language Support
- 4 channel 1080P AHD DVR
- Support remote viewing pc or phone
- Support 1 SATA HDD (Max 4TB)
- 1 port for Audio in/ out
- 1 port for VGA, 1 HDMI output
- USB back up
Kit includes
- (1) DVR box : DVR, Mouse, Remote Control, DVR
Power adaptor
- (4) AHD Optical Lens : 2MP Bullet Optical Lens; 2MP
Dome Optical Lens
- (4) 20m Siamese Cables
- (4) Optical Lens Adaptor
- Remote Viewing Software (CD)
page 9 of 11
1 2 3 4 5 6
ITEM QTY./UNIT DESCRIPTION CEILING UNIT TOTAL
NO. PRICE PRICE PRICE
After Sales Service
1. Free trainers' training before the delivery of the equipment or
upon delivery and installation
2. Free semi-annual training with certification upon request
3. Free product inspection
4. Free Consultation/ Seminar
5. Free product demonstration on selected item
Per Lot Basis Total: Php20, 000, 000.00
Note: In case of discrepancy between unit price and total, the unit price shall prevail. vvvvvvvvvv
Delivery Period: Thirty (30) calendar days
_____________________________
Signature over Printed Name
_____________________________
Name of Firm
_____________________________
Address
_____________________________
Telephone no.
Pre-bid Conference
DateTimeVenue
29/11/20181:25 PM4th Floor Room 442, City General Services Office Manila City Hall, Ermita
Closing Date : 2018-12-11

Documents

 Tender Notice