Automatic Transfer Switch testing and imaging Tender, USA - 119247757

Procurement Summary

Country : USA

Summary : Automatic Transfer Switch testing and imaging

Deadline : 21 May 2025

Other Information

Notice Type : Tender

TOT Ref.No.: 119247757

Document Ref. No. : 36C24125Q0480

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Name :Login to see tender_details

Address : Login to see tender_details

Email : Login to see tender_details

Login to see details

Tender Details

Description

The Department of Veterans Affairs, Networking Contracting Office (NCO 01) located in Brockton, MA intends to enter into a sole source procurement, pursuant to the authority of FAR 6.302-1, with Russeletric, for the following requirement:1.0 Scope of WorkThe contractor will perform annual Automatic Transfer Switch testing and imaging at the Boston Healthcare System, Brockton Division located at 940 Belmont Street, Brockton, MA.Contractor is responsible for all labor, materials, tools and special equipment required to perform the work.All Transfer Switch Testing shall occur during off hours (10:00 PM 7:00 AM)Period of Performance: one base year plus 4 option years2.0 Performance RequirementsPer the O&M Manuals, the following maintenance is recommended to be performed, based on equipment type:Vacuum switch interior to remove dirt or dust deposits. Wipe all bus bars, insulators, cables, etc with a clean, dry, lint-free cloth.Inspect the switch interior carefully for moisture, condensation build-up, or signs of any previous wetness. Moisture can cause insulation breakdown and rapid oxidation of current carrying parts. Inspect all conduit entrances and cracks between the enclosure panels for dripping leaks. Condensation in conduits may be a source of moisture and must not be allowed to drip onto live parts or insulating material. Take the necessary steps to eliminate the moisture and seal off all leaks.Inspect the switch for any signs of overheating. Discoloration and flaking of insulation or metal parts are indications of overheating.Check for signs of rodent nesting in the enclosure. If required, use a good exterminating technique in the general area of the equipment.Carefully inspect all devices for any visibly worn-out, cracked, or missing parts.Open and close contacts several times to verify they are working properly.Verify that all key interlocks and door interlocking provisions are working properly.Check all bus bar joints and terminal lugs for any...
Active Contract Opportunity
Notice ID : 36C24125Q0480
Related Notice
Department/Ind. Agency : VETERANS AFFAIRS, DEPARTMENT OF
Sub-tier : VETERANS AFFAIRS, DEPARTMENT OF
Office: 241-NETWORK CONTRACT OFFICE 01 (36C241)
General Information
Contract Opportunity Type: Special Notice (Original)
Original Published Date: May 15, 2025 01:23 pm EDT
Original Response Date: May 21, 2025 12:00 pm EDT
Inactive Policy: Manual
Original Inactive Date: Jul 20, 2025
Initiative: None

Classification
Original Set Aside:
Product Service Code: J061 - MAINT/REPAIR/REBUILD OF EQUIPMENT- ELECTRIC WIRE AND POWER DISTRIBUTION EQUIPMENT
NAICS Code: 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance:

Documents

 Tender Notice

36C24125Q0480.docx