Analog Input Board Advantech Pci‑1713 Rev A2 Tender - 137798725

Procurement Summary

Country: Ukraine

Summary: Analog Input Board Advantech Pci‑1713 Rev A2 01‑2

Deadline: 20 Mar 2026

Posting Date: 14 Mar 2026

Other Information

Notice Type: Tender

TOT Ref.No.: 137798725

Document Ref. No.: UA-2026-03-13-92147679

Competition: ICB

Financier: Self Financed

Purchaser Ownership: Public

Tender Value: Refer Document

CPV Classification

30237140 - Motherboards

Purchaser's Detail

Name: Login to see tender_details

Address: Login to see tender_details

Email: Login to see tender_details

Login to see details

Tender Details

Object of purchase: PCI‑1713 REV A2 01‑2 analog input board for the PCI bus. Purpose: high-speed isolated analog input for data acquisition systems/process control systems. Functional characteristics Channels: 32 single-ended (SE) or 16 differential (DIFF) (set by software, combined configurations are possible). [pci1713 | PDF]ADC resolution: 12 bits; Max. total sampling rate: up to 100 kS/s. [pci1713 | PDF]Buffering: built-in FIFO 4 K samples, interruption at half‑full. [pci1713 | PDF]Triggers: software, internal pacer (based on 82C54, 10 MHz base), external TTL (EXT_TRG input, low→high edge). [pci1713 | PDF]Auto scan of channels/gains: on‑board SRAM stores gain/mode for each channel; MUX scans a specified range of channels. [pci1713 | PDF]Isolation and electrical parametersGalvanic isolation: 2500 VDC between the analogue part and the PC bus. [pci1713 | PDF]Input Ranges (Programmable): Bipolar: ±10, ±5, ±2.5, ±1.25, ±0.625 V. Unipolar: 0-10, 0-5, 0-2.5, 0-1.25 V. [pci1713 | PDF]Input overload (non-damaging): up to ±30V. [pci1713 | PDF]Input impedance: 1 GΩ. [pci1713 | PDF]Accuracy/linearity: up to 0.01% FSR ±1 LSB (at low ratios), linearity ±1 LSB; CMRR up to 84 dB (depending on gain). [pci1713 | PDF]Interfaces, pinout and connection I/O connector: DB‑37F; lines AI0...AI31, common GND, input EXT_TRG (pinout and SE/DIFF circuits in the manual; with DIFF, AI pairs are used). [pci1713 | PDF]Field Wiring Recommendations: Shielded Twisted Pair, separate laying from power lines, screen connection on one side. [pci1713 | PDF]Bus, power supply, dimensions and operating conditionsBus: PCI (the controller is compatible with the PCI Rev. 2.1 specification, resources are assigned automatically by PnP). [pci1713 | PDF]Food: +5 V, 850 mA typical, 1.0 A maximum. [pci1713 | PDF] Board dimensions: 175 × 100 mm. [pci1713 | PDF]Environmental ranges: operation 0...+60 °C, storage -20...+70 °C, 5...95% RH non-condensing. [pci1713 | PDF]Service/calibration...
Name of material/service: Analog input board Advantech PCI‑1713 REV A2 01‑2 Submission of proposals lasts until: 13-03-2026, 12:51 to 20-03-2026, 21:30

Documents

 Tender Notice