Home » Tenders » Europe » Hungary » Acquisition of a Bet Device in the Digitall Project Tender, Hungary - 97460141

Acquisition of a Bet Device in the Digitall Project Tender, Hungary - 97460141

UNIVERSITY OF MISKOLC has floated a tender for Acquisition of a Bet Device in the Digitall Project. The project location is Hungary and the tender is closing on 02 Apr 2024. The tender notice number is 112715-2024, while the TOT Ref Number is 97460141. Bidders can have further information about the Tender and can request the complete Tender document by Registering on the site.

Procurement Summary

Country : Hungary

Summary : Acquisition of a Bet Device in the Digitall Project

Deadline : 02 Apr 2024

Other Information

Notice Type : Tender

TOT Ref.No.: 97460141

Document Ref. No. : 112715-2024

Competition : ICB

Financier : Self Financed

Purchaser Ownership : Public

Tender Value : Refer Document

Purchaser's Detail

Purchaser : UNIVERSITY OF MISKOLC
Address: Egyetemvaros -
Town: Miskolc
NUTS-Code: HU311
Postal Code: 3515
Attn: Zoltan Guba
Phone: 36 46565414
Fax: 36 46565424
Hungary
Email :miskolckozbeszerzes@gmail.com
URL :http://www.uni-miskolc.hu

Tender Details

Purchase of 1 BET device according to the technical description.

Purchase of BET device in the DigitAll project

1 new BET device (gas adsorption analyzer)

Minimum technical parameters of the device:

-The device can be used as a stand-alone device or in combination with a static physisorption measurement optionit is necessary to be able to use the dynamic flow method to perform titration pulsed chemisorption, temperature programmed desorption (TPD), temperature programmed reduction (TPR), temperature programmed oxidation (TPO), temperature programmed reaction (TPSR) measurements.

-The contents of the devicemake a programmable high-temperature oven that can be heated to at least 900C. The device must be able to cool down the oven from 400C to at least 50C under software control, and this should take no more than 60 minutes.

-The device must be able to at least helium, argon, nitrogen, oxygen, hydrogen, andusing carbon monoxide, carbon dioxide, and ammonia gases to carry out the measurements. Bottles of the listed gases must be able to be connected to the instrument via separate ports. The parts of the instrument in contact with these gases must be inert.

-The instrument must be equipped with a steam injection unit for water vaporand for the introduction of methanol.

-The device must have a sample preparation function.

-The instrument is capable of performing static vacuum volumetric physisorption and chemisorption measurements, for which at least one 1000 torr transducer is installed.

-The device must be designed so that the heat conductors can...
Document Type: Contract Notice
Reference Number: EKR002295682023
Contract Type: supplies
Authority Type: body-pl
Doc Title: Procurement of BET device in the DigitAll project
Dispatch Date: 2024-02-22
Publish Date: 2024-02-23
Submission Date: 2024-04-02