SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED (SPDC) has floated a tender for Provision of Lifting Inspection, Competency Training and Storage Systems Inspection Services for Shell Operations. The project location is Nigeria and the tender is closing on 08 Apr 2019. The tender notice number is NG01023608, while the TOT Ref Number is 31572901. Bidders can have further information about the Tender and can request the complete Tender document by Registering on the site.

Expired Tender

Procurement Summary

Country : Nigeria

Summary : Provision of Lifting Inspection, Competency Training and Storage Systems Inspection Services for Shell Operations

Deadline : 08 Apr 2019

Other Information

Notice Type : Tender

TOT Ref.No.: 31572901

Document Ref. No. : NG01023608

Competition : ICB

Financier : Self Financed

Purchaser Ownership : -

Tender Value : Refer Document

Purchaser's Detail

Purchaser : SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED (SPDC)
461 Constitution Ave, Phase 2, Abuja, Tel: +234-8070260165
Nigeria
URL :www.nipex-ng.com

Tender Details

Tenders are invited for Provision of Lifting Inspection, Competency Training and Storage Systems Inspection Services for Shell Operations

Provision of Lifting Equipment Inspection & Certification:
This service is available in country. The Works and Services shall include but not limited to the following:
a) Mobilization of resources and equipment to designated SHELL locations or approved contractor workshops in line with
applicable shell land transport process.
b) NDE/NDT, MPI, visual inspection, load testing, color-coding, plating, certification on Lifted Equipment and Lifting
Accessories in line with current SHELL standards, Nigerian statutory requirements and Industry standards periodically – every
six (6) monthly and yearly intervals as may be prescribed by applicable industry standards or as recommended by a competent
person.
c) Provision of dead weights, load cells and water bags for use during testing and certification of lifting equipment, gears and
accessories

Provision of Inspection and Certification for Shell Warehouse storage systems:
This service is expected to be provided by in country sources. Currently SPDC does not have a contract for this scope. It
is to be asked bidders to have SEMA (Storage Equipment Manufacturers Association) or EQUIVALENT Approved inspectors
employed. The Works and Services shall include but not limited to the following:
a) Determination of allowable shelf load capacity & unit loads for shell storage systems & attaching safe load warning notices.
b) Perform Annual periodic inspections for warehouse storage systems or as required in line with industry guidance EN 15635 to
determine
c) Identify and report impact damage to any part of the structure, particularly upright damage and beam damage

To be eligible for this tender exercise, interested contractors are required to be pre-qualified and live as essential service
vendors in the NJQS category reference 3.07.06, 3.07.01, & 3.13.08 (Product/Services) category in NipeX Joint
Qualification System (NJQS) data base. Only successfully pre-qualified and live suppliers in this category will receive
Invitation to Technical Tender (ITT).

Documents

 Tender Notice