Home » Tenders » Asia » Kuwait » Air Conditioner, Mini Split Unit, Wall Tender, Kuwait - 37914547

Air Conditioner, Mini Split Unit, Wall Tender, Kuwait - 37914547

KUWAIT OIL COMPANY (K.S.C) has floated a tender for Air Conditioner, Mini Split Unit, Wall. The project location is Kuwait and the tender is closing on 09 Dec 2019. The tender notice number is 2068873, while the TOT Ref Number is 37914547. Bidders can have further information about the Tender and can request the complete Tender document by Registering on the site.

Procurement Summary

Country : Kuwait

Summary : Air Conditioner, Mini Split Unit, Wall

Deadline : 09 Dec 2019

Other Information

Notice Type : Tender

TOT Ref.No.: 37914547

Document Ref. No. : 2068873

Competition : ICB

Financier : Self Financed

Purchaser Ownership : -

Tender Value : Refer Document

Purchaser's Detail

Purchaser : KUWAIT OIL COMPANY (K.S.C)
KOCPD Purchasing Department PD Address Ahmadi Attn: SHAIMAA SLEEM Fax; +965 23984967/23986491
Kuwait
Email :ShSSaleem@kockw.com

Tender Details

Quotation are invited for Air Conditioner, Mini Split Unit, Wall.

Document Fee: KWD 75/-.

Bid Bond: 1, 000/-.

Item;
0000118357
AIR CONDITIONER, MINI SPLIT UNIT, WALL, 24000 BTU/HR
WALL MOUNTED MINI-SPLIT UNIT WITH COOLING ONLY
CAPACITY : 24.000 BTU/HR at 50 degree Centigrade
Power Supply: Volt: 240 V ±6% Single phase, 50 Hertz
Indoor Unit:
Wall mounted indoor unit to have 3 speed variable motor with anti-bacterial filter. It should be remote controlled for easy on/off/sleep Noise level should not be more than 35 dBa. Cooling coil shall be made of seamless copper/aluminium tube with copper/aluminium fins
Outdoor Unit (Condenser!
The condenser shall be air-cooled of the induced draft type suitable for operation under Kuwait ambient weather conditions and capable of providing the design capacity when ambient temperature is 115 degree Fahrenheit dry bulb. The condenser coil shall consist of battery of copper tubes with mechanically bonded plain smooth plate type aluminum fins. Alternative equivalent coil materials shall be considered The condenser fan shall be of the axial flow type statically and dynamically balanced for quite operation The fan shall be provided with solid steel shaft or equivalent, sealed for life lubricated ball bearing and driven by resiliently mounted weather proofed motor with built-in overload protection,
The condensing unit shall be fully suitable for out door mounting at deserted condition with anti-corrosion coating.

0000129775
AIR CONDITIONER, MINI SPLIT UNIT, WALL, 30000 BTU/HR, SINGLE PHASE,
240 V ± 6%, 50 HZ
WALL MOUNTED MINI-SPLIT UNIT WITH COOLING ONLY
CAPACITY : 30, 000 BTU/HR (2.5 Ton) at 50 degree Centigrade
Power Supply: Volt: 240 V ± 6% Single phase, 50 Hertz
Indoor Unit:
Wall mounted indoor unit to have 3 speed variable motor with anti-bacterial filter. It should be remote controlled for easy on/off/sleep Noise level should not be more than 35 dBa. Cooling coil shall be made of seamless copper/aluminium tube with copper/aluminium fins
Outdoor Unit (Condenser)
The condenser shall be air-cooled of the induced draft type suitable for operation under Kuwait ambient weather conditions and capable of providing the design capacity when ambient temperature is 115 degree Fahrenheit dry bulb The condenser coil shall consist of battery of copper tubes with mechanically bonded plain smooth plate type aluminum fins. Alternative equivalent coil materials shall be considered The condenser fan shall be of the axial flow type statically and dynamically balanced for quite operation The fan shall be provided with solid steel shaft or equivalent, sealed for life lubricated ball bearing and driven by resiliency mounted weather proofed motor with built-in overload protection.
The condensing unit shall be fully suitable for out door mounting at deserted condition with anti-corrosion coating.