NORTHERN RAILWAY has floated a tender for Air Brake Direct on Line Starters. The project location is Jagadhari, Haryana, India. The reference number is 61205179C and it is closing on 18 Oct 2021. Suppliers can request Register free of cost to get the complete Tender details and download the document.

Expired Tender

Procurement Summary

State : Haryana

Summary : Air Brake Direct on Line Starters

Deadline : 18 Oct 2021

Other Information

Notice Type : Tender

TOT Ref.No.: 58217719

Document Ref. No. : 61205179C

Competition : NCB

Financier : Self Financed

Purchaser Ownership : -

Document Fees : Refer Document

Tender Value : Refer Document

EMD : Refer Document

Purchaser's Detail

Purchaser : NORTHERN RAILWAY
Address: Jagadhri Workshop

City: Jagadhari
District: Yamuna Nagar
State: Haryana
Pin: 135001
Tel/Fax: 91-1732-252388
Country: India
Email: cos@nr.railnet.gov.in
Website: http://www.nr.indianrailways.gov.in

Tender Details

Air brake direct on line starters
Tender Doc. Cost (INR) : 0.00
Earnest Money (INR) : 0.00
Tender Closing Date Time : 18/10/2021 11:00
Tender Type : Open - Indigenous
Contract Category : Expenditure
Evaluation Criteria : Itemwise/Consigneewise
Bidding System : Single Packet
Pre-Bid Conference Required : No
Pre-Bid Conference Date Time : Not Applicable
Tendering Section : 61
Inspection Agency : CONSIGNEE
Publishing Date / Time : 04/10/2021 18:15
Procure From Approved Sources : No
Approving Agency : Not Applicable

Description : Air brake direct on line starters with 2 sets of 3 pole contactor, each set control separately by 415 V, 50 Hz, AC contactor coils. detail follows as: 01 set of contactor coil is to be controlled by the forward direction of rotation through an inching type push button and the other set through another inching button to control the reverse direction of 5 HP, 3 phase, 50 Hz, 415 volt AC motor. There must be electrical inter locking contact to prevent both set of contactors to close simultaneously. Each of above push buttons should have one normally closed auxiliary contacts and one stop push button are required. The starter shall be completed with overload, shall be wired and shall be provided with power plug and socket with locking arrangement as shown in Schematic diagram DRG. No. 1736/23 and 1737/23, Mat. specn. IS:8544 (Part-1), IS: 13947-4-SEC-1/1993. Each starter is to be provided with 2 nos. power plug & socket 2(two) nos. control plug & socket. Maximum dimension 280 MM(B) X 360 MM(L) X 162 MM(T). Make- BCH/Havells/Jeevan/Schneider

Consignee
SENIOR SECTION
ENGG./POWER
HOUSE/JUDW, NR
Haryana 20.00 Numbers

Documents

 Tender Notice


Gem Services Registration Consultant